76
Fragrance diffuser
Diffuses a fragrance in the passenger
c ompartment from the central air vents.
Operating wheel
The wheel on the dashboard adjusts the
intensity of diffusion of the fragrance.
F
T
urn the wheel to the right to diffuse
fragrance.
F
T
urn the wheel to the left to stop diffusing
fragrance.
The central vents must be open.
The intensity of the fragrance diffusion
may depend on the ventilation or air
conditioning settings.
Fragrance cartridge
This cartridge can be removed easily. On first
use, replace the plug with a real cartridge.
You can change it at any time, thanks to the
sealed cover that allows you to keep it enclosed
when it has already been opened.
You can obtain different fragrance cartridges
from your dealer or a
qualified workshop.
Do not discard the original cartridge,
which ser ves as a
blanking plug if no
fragrance diffuser is used.
To extend the ser vice life of the cartridge,
turn the knob to the left when you no
longer want fragrance to be diffused in the
passenger compartment.
For safety reasons, do not per form any
operations on the cartridge while driving.
Never remove the cartridges.
Do not try to refill the diffuser or
cartridges.
Avoid contact with the skin or eyes.
Keep cartridges out of the reach of
children or pets.
Removing the cartridge
Installing the cartridge
F Remove the sealed cover from the cartridge.
F
I
nstall the cartridge (flower to the top left).
F
P
ress the knob and turn it a quarter turn in
the clockwise direction.
F
P
ress the knob and turn it a quarter turn in
the anti-clockwise direction.
F
R
emove the cartridge.
F
R
efit the sealed cover.
03
Ease of use and comfort
84
Lighting control stalk
Main lighting
The various front and rear lamps of the vehicle
are designed to adapt the driver's visibility
progressively according to the climatic
conditions:
-
s
idelamps, to be seen,
-
d
ipped beam headlamps to see without
dazzling other drivers,
-
m
ain beam headlamps to see clearly when
the road is clear.
Additional lighting
Other lamps are installed to fulfil the
requirements of particular conditions of
visibility:
-
a r
ear foglamp to be seen from afar,
-
f
ront foglamps for greater visibility,
-
L
ED daytime running lamps, to be seen
during the day.
Programming
You can adjust the settings of certain functions:
- gu ide-me-home lighting,
-
a
utomatic illumination of headlamps, In some climatic conditions (low
temperature, humidity), the presence
of mist on the internal sur face of the
headlamp and rear lamp glass is normal;
this disappears a
few minutes after the
lighting is switched on.
Travelling abroad
LED/Xenon headlamps
If planning to use your vehicle in a
country
that drives on the other side of the road, the
headlamp dipped beams must be adjusted to
avoid dazzling oncoming drivers. F
I
nsert an appropriate male hexagonal
spanner (not supplied) into the screw's
hexagonal socket.
F
T
urn the spanner one half-turn in the
clockwise direction.
On your return, do not forget to re-
establish the initial setting of your
headlamps by performing these
operations in reverse order.
Without AUTO lighting
With AUTO lighting
F Raise the bonnet to access the adjusting screw (one per headlamp).
04
Lighting and visibility
