2018 CITROEN C4 clutch

121
C4-cactus_en_Chap06_conduite_ed01-2016
Starting
The parking brake must be applied.
F
 
W

ith
 
a   manual   gearbox,   place   the   gear  
l

ever in neutral then depress the clutch
pedal
 f

ully.
F
 
W

ith
 
an   electronic   gearbox,   place   the  
c

ontrol at N   then   press   the   brake   pedal  
f

i r m l y.
F
 
I

nsert
  the   key   into   the   ignition   switch;   the  
s

ystem   recognises   the   code.
F
 
U

nlock   the   steering   column   by   simultaneously
 t

urning   the   steering   and   the   key.
In
 
certain   cases,   you   may   have   to   apply  
m

ore   force   to   the   steering   (wheels   on  
f

ull
  lock,   for   example).
F
 
W

ith
 
a   petrol   engine,   operate   the   starter  
m

otor
  by   turning   the   key   to   position   3
without
  pressing   the   accelerator   pedal,  
u

ntil
 
the   engine   starts.   Once   the   engine   is  
r

unning,   release   the   key.
Starting-switching off the engine
It has 3 positions:
- position 1 (Stop):
  insert   and   removing  
the
  key,
-
position 2 (Ignition on) :
  steering   column  
u

nlocked,   ignition   on,   Diesel   preheating,  
e

ngine
 r
unning,
-
position 3 (Starting) .
Ignition switch
Switching off the engine leads to a loss o
f   braking   assistance.
Ignition on position (2)
It allows the use of the vehicle's electric equipment   or   portable   devices   to   be   charged.
Once
  the   state   of   charge   of   the   battery   drops  
t

o   the   reserve   level,   the   system   switches   to  
e

nergy   economy   mode:   the   power   supply   is  
c

ut   off   automatically   to   preserve   the   remaining  
b

attery   charge.
Avoid
  attaching   heavy   objects   to   the  
k

ey,   which   would   weigh   down   on   its  
b

lade   in   the   ignition   switch   and   could  
c

ause   a   malfunction.
It
  could   adversely   affect   the   deployment  
o

f   the   front   airbag.
6
Driving

125
C4-cactus_en_Chap06_conduite_ed01-2016
5-speed manual gearbox
Engaging reverse
gear
F Press  the   clutch   pedal   fully   down.
F  P ush   the   gear   lever   fully   to   the   right   then  
ba

ckwards.
Only
  engage   reverse   gear   when   the
 v

ehicle   is   stationary   with   the   engine   at   idle.
As a safety precaution and to facilitate
starting
  of   the   engine:
-

a
lways select neutral,
-
 
p
ress   the   clutch   pedal.
6
Driving

128
C4-cactus_en_Chap06_conduite_ed01-2016
N flashes in the instrument panel, accompanied   by   an   audible   signal   and  
a

  message   if   the   control   N has not been
pressed
  for   starting.
Press control N
  to   select   neutral.
Moving off
F Switch  on   the   ignition.
F Sel ect neutral (control N ).
 

 
T
he   indicator   lamp   for   the   control   comes   on.
F
 
P
ress   the   brake   pedal   fully.
F
 
S
tart   the   engine. N
  appears   in   the   instrument   panel.
F
S
elect for ward drive (control D) or reverse
(c ontrol R )
 T

he   associated   indicator   lamp   comes   on   in  
t

he   control   panel.
D and 1 or R
  appear   in   the   instrument  
pan

el.
Creep function
This function allows the vehicle to be
manoeuvred  more   easily   at   low   speeds   (when  
p

arking,   in   traffic   jams...).
After
  pressing   control   D or R, the vehicle
moves as soon as you take your foot off the
brake pedal ,
  at   low   speed   and   with   the   engine  
a

t   idle.
The
  creep   function   may   be   temporarily  
u

navailable   if   the   clutch   temperature   is  
t

oo   high   or   the   slope   too   steep.
Do not leave children unsupervised
inside
  the   vehicle   when   the   engine   is  
r

unning.
You
 
must
 
keep
 
your
 
foot
 
on
 
the
 
brake
 
p

edal
 
while
 
starting
 
the
 
engine.
The
 
"Foot
 
on
 
the
 
brake"
 
warning
 
and
 
t

he associated control panel indicator
lamp
 
flash
 
if
 
the
 
brake
 
pedal
 
is
 
not
 
p

ressed
 
when
 
starting
 
the
 
engine.
Press
 
firmly
 
on
 
the
 
brake
 
pedal. F
 
R

elease
 
the
 
parking
 
brake.
F
 
P

rogressively
 
take
 
your
 
foot
 
off
 
the
 
brake
 
ped

al.
 T

he
 
vehicle
 
moves
 
off.
Driving

129
C4-cactus_en_Chap06_conduite_ed01-2016
Never select neutral (position N) when
moving.
Forward drive
F Press control D . T
he   indicator   lamp   in   the   control   comes   on.
D
  and   the   gear   engaged   appear   in  
t

he   instrument   panel.
The
  gearbox   then   operates   in   auto-adaptive  
m

ode,   without   any   action   on   the   part   of   the  
d

river.   It   continuously   selects   the   most   suitable  
g

ear   taking   account   of:
-
 
o
ptimisation   of   fuel   consumption,
-
 
d
riving   style,
-

r
oad conditions,
-
 
v
ehicle   load.
For
  optimum   acceleration,   when  
ov

ertaking   another   vehicle   for   example,  
p

ress the accelerator pedal fully down,
beyond
  the   point   of   resistance.
Temporary control of gear
changing
You can temporarily take over control of gear changes   using   the   steering   mounted   "+" and
"-"
control
  paddles:   if   the   engine   speed   allows,   the
 g

ear   change   is   carried   out.
This function allows you to anticipate certain
situations
 
s
uch  
a
s  
ov
ertaking  
a
nother  
v
ehicle  
o
r  
a

pproaching   a   bend.
After
  a   few   moments   without   any   action   on   the  
p

addles,   the   gearbox   resumes   control   of   gear  
c

hanging
 a
utomatically. To
  engage   reverse,   the   vehicle   must   be  
i

mmobilised   with   your   foot   on   the   brake.
F
P
ress control R
.
 T
he   indicator   lamp   in   the   control   comes   on.
Reverse
There is an audible signal on enga
gement o f r everse.
If
 
reverse   gear   is   requested   when   moving,  
t

he

N
 
warning   lamp   flashes   and   the   gearbox  
g

oes
 
into   neutral   automatically.
To
 
engage   reverse,   stop   the   vehicle   then,   with  
y

our
 
foot   on   the   brake   pedal,   press   control   N,
then R .
Do
 
not
 
press
 
the
 
brake
 
and
 
accelerator
 
p

edals
 
at
 
the
 
same
 
time:
 
this
 
could
 
c

ause
 
very
 
rapid
 
wear
 
of
 
the
 
clutch.
6
Driving

132
C4-cactus_en_Chap06_conduite_ed01-2016
Stop & Start
Operation
Going into engine STOP
mode
The "ECO"  warning   lamp   comes   on i
n   the   instrument   panel   and   the   engine g

oes   into   standby   automatically:
-

w

ith a manual gearbox , when stationary,
in neutral, and you release the clutch
pedal.
-

w

ith an electronic gearbox , when
stationary
  or   at   speeds   below   5   mph  
(

8 km/h)   (depending   on   version),   in   neutral  
(

control on N )
  or   when   you   press   the   brake  
ped

al. Never
  refuel   with   the   engine   in   STOP  
m

ode;   you   must   switch   off   the   ignition.
For
  your   comfort,   during   parking  
m

anoeuvres,   STOP   mode   is   not  
a

vailable for a few seconds after
coming
  out   of   reverse   gear.
The
  Stop   &   Start   system   does   not   affect  
t

he   the   vehicle's   other   systems,   such   as  
f

or   example   braking,   power   steering...
The
 
Stop
 
&
 
Start system
 
puts
 
the
 
engine
 
t

emporarily
 
into
 
standby
 
-
 
STOP
 
mode
 
-
 
during
 
s

tops
 
in
 
the
 
traffic
 
(red
 
lights,
 
traffic
 
jams,
 
or
 o
ther...).
 
The
 
engine
 
restarts
 
automatically
 
-
 S
TART
 
mode
 
-
 
as
 
soon
 
as
 
you
 
want
 
to
 
move
 
o

ff.
 
The
 
restart
 
takes
 
place
 
instantly,
 
quickly
 
a

nd
 
silently.
Per fect
 
for
 
urban
 
use,
 
the
 
Stop
 
&
 
Start
 
system
 
r

educes
 
fuel
 
consumption
 
and
 
exhaust
 
e

missions
 
as
 
well
 
as
 
the
 
noise
 
level
 
when
 
s

tationary.
Stop & Start time
counter
A cumulative time counter for periods i n   STOP   mode   during   a   journey.
It
 
is
 
displayed   in   the   trip   computer   (accessible  
v

ia the " Driving assistance "
  menu   of   the  
t

ouch
 
screen   tablet).
It
 
resets
 
to   zero   every   time   the   ignition   is  
s

witched
 
on.
The
 
Stop
 
&
 
Start
 
system
 
requires
 
t

he use of a 12 V battery of special
technology
 
and
 
specification.
 
All
 w
ork
 
on
 
this
 
type
 
of
 
battery
 
must
 
o

nly be done by a CITROËN dealer
or
 
a
 
qualified
 
workshop.
 
For
 
more
 
i

nformation
 
on
 
the
 
12
 
V
 
battery,
 
refer
 
to
 
t

he
 
corresponding
 
section.
Driving

133
C4-cactus_en_Chap06_conduite_ed01-2016
Going into engine START
mode
The "ECO" warning   lamp   goes   off  a
nd   the   engine   starts   automatically:
-

w

ith a manual gearbox , when you fully
depress
  the   clutch   pedal.
-

w

ith an electronic gearbox:
●
 
c

ontrol  
o
n  
D,

 
w
hen  
y
ou  
r
elease  
t
he  
b
rake  
ped

al,
●
 
c

ontrol   on   N   and   brake   pedal   released,  
w

hen you press control D ,
●
 w

hen
 y
ou
 enga
ge
 r
everse. START
  mode   is   invoked   automatically   when:
-  y ou   open   the   the   driver's   door,
-
 
y
ou   unfasten   the   driver's   seat   belt,
-
 
t
he   speed   of   the   vehicle   exceeds   7   mph  
(11
  km/h)   with   an   electronic   gearbox,
-
 
s
ome   special   conditions   (battery   charge,  
e

ngine   temperature,   braking   assistance,  
a

mbient   temperature...)   where   the   engine   is  
n

eeded   for   control   of   a   system.
Special cases: START invoked
automatically
In this case the "ECO" warning  l
amp   flashes   for   a   few   seconds,   then  
g

oes off.
This operation is perfectly normal.
Special cases: STOP mode not
available
STOP mode is not invoked principally when:
-  t he   vehicle   is   on   a   steep   slope   (rising   or  
f

alling),
-
 
t
he   driver's   door   is   open,
-
 
t
he   driver's   seat   belt   is   not   fastened,
-
 
t
he   vehicle   has   not   exceeded   6   mph  
(

10 km/h)   since   the   last   engine   start   by   the  
d

river,
-
 
t
he   engine   is   needed   to   maintain   a  
c

omfortable   temperature   in   the   passenger  
c

ompartment,
-
 
d
emisting   is   active,
-
 
s
ome   special   conditions   (battery   charge,  
e

ngine   temperature,   braking   assistance,  
a

mbient   temperature...)   where   the   engine   is  
n

eeded   to   assure   control   of   a   system.
In this case, the "ECO"
 

warning  
l

amp   flashes   for   a   few   seconds   then  
g

oes off.
This operation is perfectly normal.
6
Driving

140
C4-cactus_en_Chap06_conduite_ed01-2016
Flashing of the dashes indicates a fault with the cruise   control.
Have
  it   checked   by   a   CITROËN   dealer   or   a  
q

ualified
 w
orkshop.
Operating fault Switching off
F Turn wheel 1 to the "0" p osition. T
he   display   of   information   related   to   the  
c

ruise   control   disappears. When the cruise control is switched on,
be
  careful   if   you   maintain   the   pressure  o
n   one   of   the   programmed   speed  
c

hanging   buttons:   this   may   result   in   a  
v

ery   rapid   change   in   the   speed   of   your  
v

ehicle.
Do not use the cruise control on
slippery
  roads   or   in   heavy   traffic.
On a steep descent, the cruise control
will not be able to prevent the vehicle
from
  exceeding   the   programmed   speed.
On
  steep   climbs   or   when   towing,   the  
p

rogrammed   speed   may   not   be   reached  
o

r   maintained.
The
  use   of   mats   not   approved   by  
C

ITROËN   may   inter fere   with   the  
o

peration   of   the   cruise   control.
To
  avoid   any   risk   of   jamming   of   the  
ped

als:
-
 
e
nsure   that   the   mat   is   secured  
c

o r r e c t l y,
-
 
n
ever   fit   one   mat   on   top   of   another.
It
 
is
 
possible
 
to
 
exceed
 
the
 
programmed
 
speed
 
t

emporarily
 
by
 
pressing
 
the
 
accelerator
 
pedal.
To
 
return
 
to
 
the
 
programmed
 
speed,
 
simply
 
r

elease the accelerator pedal until the
programmed
 
cruise
 
speed
 
is
 
reached
 
again.
Exceeding the programmed
speed
Once switched on, you can pause the cruise
control   at   any   time   by   pressing   button   4:   the  
s

creen   confirms   the   pause.
Pause
If the programmed speed is exceeded, the   displayed   speed   flashes.
Once the speed of the vehicle returns
to
  the   programmed   speed   setting,   the  
d

isplay   becomes   steady   again.
The cruise control is paused
 m

anually
 o

r   by   pressing   the   brake   or   clutch   pedal  
o

r   if   the   ESC   system   is   invoked   for  
s

afety   reasons.
Driving

145
C4-cactus_en_Chap06_conduite_ed01-2016
Park Assist
This system provides active assistance with parking, detecting a parking space then controlling the steering to park in the space.
I t   controls   the   steering   while   the   driver   manages   the   accelerator,   brakes,   gears   and   clutch   (manual   gearbox).   During   phases   of   entry   into   and   exit   from  
a

  parking   space,   the   system   provides   visual   and   audible   information   to   the   driver   in   order   to   make   the   manoeuvre   safe.   It   may   be   necessary   to   move  
f

or wards   and   backwards   more   than   once.
The
  Park   Assist   system   cannot   in   any  
c

ircumstances   replace   the   need   for  
v

igilance   on   the   part   of   the   driver.
The
  driver   must   remain   in   control   of  
t

heir   vehicle   ensuring   that   the   space  
r

emains   clear   during   the   manoeuvre.
In
  some   circumstances,   the   sensors  
m

ay   not   detect   small   obstacles   located  
i

n   their   blind   spots. Changing
  tyre   sizes   (out-size   tyres,  
w

inter   tyres,   ...)   can   inter fere   with  
t

he   correct   operation   of   the   parking  
a

ssistance   system.
During
  a   manoeuvre   the   steering   wheel  
t

urns   quickly:   do   not   hold   the   steering  
w

heel, do not place your hand between
the
  spokes   of   the   steering   wheel   and  
t

ake   care   with   loose   and   bulky   clothing,  
s

carves,   handbags...   There   is   a   risk   of  
in

jury. For
  entry   into   a   parking   space   (parallel  
p

arking)   the   system   does   not   detect  
s

paces   which   are   clearly   much   smaller  
o

r   larger   than   the   size   of   the   vehicle.
This
  "parking   assistance"   system  
i

s   activated   automatically   during  
m

anoeuvres;   it   is   therefore   possible  
t

hat   a   symbol   comes   on   in   the   screen,  
a

ccompanied   by   an   audible   signal,  
w

ithout   affecting   the   manoeuvre.The
  selection   of   the   type   of   manoeuvre  
(

entering   or   exiting   a   parallel   parking  
s

pace)   prevents   a   change   to   STOP  
m

ode   of   Stop   &   Start.
In
  STOP   mode,   this   selection   restarts  
t

he
 eng
ine.
The
  driver   can   take   control   at   any   time   by   gripping   the   steering   wheel.
The
 
s
ystem  
p
rovides  
a
ssistance  
i
n  
e
ntering  
a
nd  
e

xiting
 a par
king
 spa
ce
 w
hen
 par
allel
 par
king.
6
Driving