2018 CITROEN C4 wheel

191
C4-cactus_en_Chap08_En-cas-de-panne_ed01-2016
Spare wheel
The tools are installed in the boot under the
floor,  or   may   be   located,   depending   on   version,  
u

nder
 t
he
 f
ront
 p
assenger
 sea
t.
Access to the tools
List of tools
All of these tools are specific to your vehicle and
can  vary   according   to   the   level   of   equipment.   Do n

ot   use   them   for   other   purposes.
1.
 W

heelbrace.
 F

or   removing   the   wheel   trim   and   the   wheel  
bol

ts.
2.
 J

ack   with   integral   handle.
 F

or   raising   the   vehicle.
3.
 W

heel   bolt   cover   removal   tool.
 F

or   removing   the   wheel   bolt   covers   on   alloy  
w

heels
 o
r
 t
he
 c
entral
 w
heel
 c
ap
 (
depending
 o

n   version).
4.
 R

emovable   towing   eye.
For
  more   information   on   towing,   refer   to   the  
c

orresponding
 s
ection.
Procedure
 
for
 
changing
 
a
 
wheel
 
with
 
a
 
damaged
 
tyre
 
for
 
the
 
spare
 
wheel
 
using
 
the
 
tools
 
provided
 
with
 
the   vehicle.
Wheel with trim
When refitting the wheel
,   refit   the   trim  s
tarting   by   placing   its   notch   facing   the   valve  
a

nd   press   around   its   edge   with   the   palm   of  
y

our hand.
8
In the event of a breakdown

192
C4-cactus_en_Chap08_En-cas-de-panne_ed01-2016
Taking out the wheel
F Unclip  the   tool   storage   box   (standard   spare  w
heel).
F
 
U
nscrew   the   central   nut.
F
 
R
emove   the   fixing   parts   (nut   and   bolt).
F
 
P
ull   the   spare   wheel   towards   you   from   the  
r

e a r.
F
 
T
ake   the   wheel   out   of   the   boot.
The spare wheel is installed in the boot under
the
 
floor.
Depending
 
on
 
the
 
engine,
 
the
 
spare
 
wheel
 
is
 
a s

tandard wheel or the "space-saver" type
(BlueHDi
 
100).
Access to the spare wheel
Putting the wheel back in place
F Put   the   wheel   back   in   its   housing.
F  U nscrew   the   nut   on   the   bolt   by   a   few   turns.
F
 
R
eposition   the   fixing   parts   (nut   and   bolt)   in  
t

he   centre   of   the   wheel.
F
 
T
ighten   fully   until   the   central   nut   clicks   to  
r

etain   the   wheel   correctly.
F
 
C
lip   the   tool   storage   box   back   into   place  
(

standard
 spar
e
 w
heel).
In the absence of a wheel in the spare wheel
well,
  the   fixing   parts   (nut   and   bolt)   cannot   be  
r

efitted.
In the event of a breakdown

193
C4-cactus_en_Chap08_En-cas-de-panne_ed01-2016
Removing a wheel
Parking the vehicle
Immobilise the vehicle where it does not block   traffic:   the   ground   must   be   level,  
s

table   and   not   slippery.
Apply
  the   parking   brake,   switch   off   the  
i

gnition   and   engage   first   gear   to   block  
t

he   wheels.
Check
  that   the   parking   brake   warning  
l

amps   in   the   instrument   panel   come   on.
The
  occupants   must   get   out   of   the  
v

ehicle   and   wait   where   they   are   safe.
Ensure
  that   the   jack   is   correctly  
p

ositioned   at   one   of   the   vehicle's  
j

acking   points.
Incorrect
  use   of   the   jack   could   cause  
t

he   vehicle   to   drop.
Never
  go   underneath   a   vehicle   raised  
u

sing   a   jack;   use   an   axle   stand.
List of operations
F Remove  the   wheel   bolt   cover(s)   using   the  t
ool 3   (depending   on   version).
F
 
S
lacken   the   bolts   using   the  
w

heelbrace

1 o n l y.
Do
  not   use:
-
 
t
he   jack   for   any   other   purpose   than  
l

ifting   the   vehicle,
-
 
a
  jack   other   than   the   one   supplied  
b

y   the   manufacturer. The
  jack   must   only   be   used   to   change   a  
w

heel   with   a   damaged   tyre.
The   jack   does   not   require   any  m
aintenance.
The
  jack   conforms   to   European  
l

egislation,   such   as   defined   in   the  
M

achinery   Directive   2006/42/CE.
8
In the event of a breakdown

194
C4-cactus_en_Chap08_En-cas-de-panne_ed01-2016
F Position  the   foot   of   the   jack   2   on   the   ground  a
nd ensure that it is directly below the
front
A or rear B   jacking   point   provided   on  
t

he underbody, whichever is closest to the
wheel
  to   be   changed. F
 E xtend   the   jack   2   until   its   head   comes   into   contact   with   the   jacking   point   A or B   used;   the  v
ehicle's   contact   area   A or B   must   engage   with   the   central   part   of   the   head   of   the   jack.
F
 
R
aise   the   vehicle   until   there   is   sufficient   space   between   the   wheel   and   the   ground   to   admit   the  
s

pare   (not   punctured)   wheel   easily.
Ensure
  that   the   jack   is   stable.   If   the   ground   is   slippery   or   loose,   the   jack   may   slip   or   drop   -  
R

isk   of   injury!
Ensure
  that   the   jack   is   positioned   only   at   one   of   the   jacking   points   A or B under the vehicle,
making
  sure   that   the   vehicle's   contact   sur face   is   centred   on   the   head   of   the   jack.   Other wise  
t

here   is   a   risk   of   damage   to   the   vehicle   and/or   of   the   jack   dropping   -   Risk   of   injury!
In the event of a breakdown

195
C4-cactus_en_Chap08_En-cas-de-panne_ed01-2016
Fitting a wheel
Fitting the spare wheel
If your vehicle is fitted with alloy wheels,
when  tightening   the   bolts   on   fitting,   it   is  
n

ormal  
t
o  
n
otice  
t
hat  
t
he  
w
ashers  
d
o  
n
ot  
c

ome   into   contact   with   the   spare   wheel.  
T

he wheel is secured by the conical
sur face
  of   each   bolt.
After changing a wheel
Have the tightening of the bolts and the pressure   of   the   spare   wheel   checked  
b

y   a   CITROËN   dealer   or   a   qualified  
w

orkshop   without   delay.
Have the punctured wheel repaired
and refitted to the vehicle as soon as
possible.
F
 
R

emove
 
the
 
bolts
 
and
 
store
 
them
 
in
 
a
 
clean
 
p

lace.
F
 R
emove
 
the
 
wheel.
8
In the event of a breakdown

196
C4-cactus_en_Chap08_En-cas-de-panne_ed01-2016
List of operations
F Put  the   wheel   in   place   on   the   hub.
F  S crew   in   the   bolts   fully   by   hand.
F
 
P
re-tighten   the   bolts   using   the  
w

heelbrace

1  
o
n l y. F
 L ower   the   vehicle   fully.
F  F old   the   jack   2   and   detach   it.F
 T ighten   the   bolts   using   the  w
heelbrace 1 o n l y.
F
 
R
efit   the   wheel   bolt   cover(s)   (depending   on  
v

e r s i o n).
In the event of a breakdown

200
C4-cactus_en_Chap08_En-cas-de-panne_ed01-2016
Front foglamps
You can also contact a CITROËN
dealer  or   a   qualified   workshop   for   the  
r

eplacement   of   these   bulbs.
F
 
B

elow
 
the
 
front
 
bumper,
 
unscrew
 
t

he 3 wheel
 
arch
 
liner
 
fixing
 
screws.
F

M

ove the wheel arch liner aside to allow
access
 
to
 
the
 
front
 
foglamp.
F
 
D

isconnect
 
the
 
connector
 
from
 
the
 
bulb
 
h

older
 
by
 
pressing
 
on
 
its
 
tab,
 
located
 

at
 
the
 
top. F
 
R

emove   the   bulb   holder   by   squeezing  
the   two   clips   (top   and   bottom)   with   thumb  
a

nd
 f
inger.
F
 
R

eplace   the   module   (bulb   holder   and   bulb).
To
 
reassemble,   carry   out   these   operations   in  
r

everse
 o
rder.
In the event of a breakdown

207
C4-cactus_en_Chap08_En-cas-de-panne_ed01-2016
Dashboard fuses
The 2 fuseboxes are placed in the lower dashboard,   below   the   steering   wheel.Fuse
N° Rating
(A) Functions
F01 10Brake   pedal   (switch   2),   Stop   &   Start.
F02 5Headlamp   beam   height   adjuster,   additional   heater   (Diesel),  
p

arking   sensors,   diagnostic   socket,   door   mirrors   (electric  
a

djustment),   Grip   control.
F03 10Diesel   additive   pump,   electric   power   steering,   clutch   pedal  (
sw i tc h).
F04 5Rain
  and   sunshine   sensor.
F06 10Brake
  pedal   (switch   1),   diagnostic   socket.
F08 5
Top of steering column contacts with steering mounted controls.
F105Emergency   call   /   Assistance   call.
F12 5Stop
  &   Start,   ABS,   ESC.
F13 5Parking
  sensors,   reversing   camera.
F14 10Electronic
  gearbox,   switch   panel   (below   the   touch   screen  
t

ablet),   air   conditioning,   touch   screen   tablet.
F16 1512
  volt   socket.
F18 20Radio.
Access to the fuses
F Unclip  the   cover   by   pulling   at   top   left,   then  r
ight.
Left hand fusebox
8
In the event of a breakdown