2018 BMW X4 Owners Manual

'yEngaging selector lever position N.'yUsing vehicle equipment.
There is a risk of accidents or injuries. Do notleave children or animals unattended in the vej
hicle. Take the remote control with you when exiting and lock the vehicle.'

Safety
switch
General
information
The safety switch in the driver's door can be
used to prevent children, for instance from
opening and closing the rear windows using
the switches in the rear.
If an accident of a certain severity occurs, the safety function is switched off automatically.
Switching
on
and
off Press button.
The LED lights up if the safety funcj
tion is switched on.
Glass
sunroof,
electric
General
information The glass sunroof and the sliding visor can be
operated together or separately using the
same switch.
The glass sunroof is operational when the ignij tion is switched on.
Safety
information WARNING
Body parts can be jammed when operatj
ing the glass sunroof. There is a risk of injury. Make sure that the area of movement of theglass sunroof is clear during opening and closjing.'

The glass sunroof and sliding visor open
automatically.
The glass sunroof closes automatically.
The sliding visor can be manually closed.
Pressing the switch upward stops the moj
tion.
Convenient opening via the remote control, rej
fer to page 35.
Closing by means of Comfort Access, refer to page 39.
Comfort
position
If the glass sunroof is not completely opened
automatically, the comfort position has been attained. In this position the wind noises in theinterior are the least.
If desired, continue the movement by pressing
the switch.
Jam
protection
system
General
information
If the closing force exceeds a certain value when closing the glass sunroof, the closing opjeration is interrupted once the roof reaches thehalf-open position, or it is stopped when closjing from the tilted position. The glass sunroof
opens slightly.
Closing
from
the
open
position
without
jam
protection
If there is an external danger, proceed as folj
lows:
1.Push the switch forward past the resistj
ance point and hold.The glass sunroof closes with limited jam protection. If the closing force exceeds aspecific threshold, closing is interrupted.2.Push the switch forward again past the rej
sistance point and hold until the glass sunj
roof closes without jam protection. Make sure that the closing area is clear.
Closing
from
the
raised
position
without
jam
protection
If there is an external danger,
push the switch forward past the
resistance point and hold it.
The glass sunroof closes withj
out jam protection.
Initializing
after
a
power
interruption General
information After a power failure during the opening or
closing process, the glass sunroof can only be
operated to a limited extent.
The system can be initialized under the followj
ing conditions.
'yThe vehicle is parked in a horizontal posij
tion.'yThe engine is running.'yThe external temperature is above
41 

Initializing
the
systemPress the switch up and hold ituntil the initialization is comj
plete:
Initialization begins within
15 seconds and is completed
when the glass sunroof is completely closed.Seite 52ControlsOpening
and
closing52
Online Edition for Part no. 01402977904 - II/17

SettingsVehicle
features
and
options
This chapter describes all standard, country- specific and optional features offered with theseries. It also describes features that are notnecessarily available in your vehicle, e. g., due
to the selected options or country versions.
This also applies to safety-related functions
and systems. When using these functions and systems, the applicable laws and regulations
must be observed.
Sitting
safely
An ideal seating position that meets the needs
of the occupants can make a vital contribution to relaxed, fatigue-free driving.
In the event of an accident, the correct seating
position plays an important role. Additionally, observe the following chapters for safe driving:'ySeats, refer to page 53.'ySafety belts, refer to page 57.'yHead restraints, refer to page 58.'yAirbags, refer to page 108.
Seats
Safety
information WARNING
Seat adjustments while driving can lead
to unexpected movements of the seat. Vehicle
control could be lost. There is a risk of an accij dent. Only adjust the seat on the driver's sidewhen the vehicle is stationary.'

Forward/backward
Pull the lever and slide the seat in the desireddirection.
After releasing the lever, move the seat forj
ward or back slightly making sure it engages
properly.
Height
Pull the lever and apply your weight to the seat or lift it off, as necessary.
Backrest
tilt
Pull the lever and apply your weight to the
backrest or lift it off, as necessary.
Seat
tilt
Pull the lever and move the seat to the desired
tilt. After releasing the lever, apply your weight to the seat or lift it off to make sure the seat
engages properly.
Electrically
adjustable
seats
General
information
The seat setting for the driver's seat is stored
for the profile currently used. When the vehicle
is unlocked via the remote control, the position
is automatically retrieved if the function, refer to page 47, is activated for this purpose.
The current seat position can be stored using
the memory function, refer to page 60.
Overview
1Memory function2Backrest width3Lumbar support4Backrest tilt5Forward/backward, height, seat tiltSeite 54ControlsSettings54
Online Edition for Part no. 01402977904 - II/17

Forward/backward
Push switch forward or backward.
Height
Push switch up or down. Seat
tilt
Move switch up or down.
Backrest
tilt
Move switch forward or backward.Thigh
support
Pull the lever at the front of the seat and adjustthe thigh support.
Lumbar
support The curvature of the seat backrest can be adj
justed in a way that it supports the lumbar rej gion of the spine. The lower back and thespine are supported for upright posture.
'yPress the front/rear section
of the button:
The curvature is increased/
decreased.'yPress the upper/lower secj
tion of the button:
The curvature is shifted up/ down.Seite 55SettingsControls55
Online Edition for Part no. 01402977904 - II/17

Backrest
width
General
information
You can change the backrest width by adjustj
ing the side wings of the backrest.
Settings'yPress the front section of
the button:
The backrest width dej
creases.'yPress the rear section of the
button:
The backrest width inj
creases.
Front
seat
heating
Overview
Seat heating
Switching
on Press button once for each temperajture level.
The maximum temperature is reached when three LEDs are lit.
If the trip is continued within approx. 15 mij
nutes after a stop, seat heating is activated auj
tomatically with the temperature selected last.
When ECO PRO is activated, the heater output
is reduced.
Switching
off
Press and hold the button, until the
LEDs go out.
Rear
seat
heating
Overview
Seat heating
Switching
on Press button once for each temperajture level.
The maximum temperature is reached when three LEDs are lit.
If the trip is continued within approx. 15 mij
nutes after a stop, seat heating is activated auj
tomatically with the temperature selected last.
When ECO PRO is activated, the heater output
is reduced.
Switching
off Press and hold the button, until the
LEDs go out.
Seite 56ControlsSettings56
Online Edition for Part no. 01402977904 - II/17