2018 AUDI Q7 lug pattern

0 a, .... N
" N .... 0
0
l: ..
by the tire manufacturer. This in­
formation is used to contact con­ sumers if a tire defect requires a
recall.
Vehicle capacity weight
means the rated cargo and lug­
gage load plus 150 lbs . (68 kilo­
grams) times the vehicle's desig­
nated seating capacity.
Vehicle ma ximum load on the
tire
means that load on an indiv idual
tire that is determined by distrib­
uting to each axle its share of the
maximum loaded vehicle weight
and dividing by two.
Vehicle normal load on the tire
means that load on an indiv idual
tire that is determined by distrib­ uting to each axle its share of the
curb weight, accessory weight,
and normal occupant weight (dis ­
tributed in accordance with¢
ta­
ble on page 342)
and dividing by
two .
Occupant loading and distr i­
bution for vehicle normal load
for various designated seating
capacities
Refer to the tire inflation pres­
s u re label
¢page 340, fig . 272
Wheels
for the n umber of seating posi­
tions . Refer to the table ¢
table
on page 34 2
for the number of
people tha t correspond to the ve­
hicle normal load.
New tires or wheels
Audi recommends having all work
on tires o r wheels performed by
an authorized Audi dealer or au­
thorized Audi Service Facility.
These facilities have the proper
knowle dge and are eq uipped with
the requ ired too ls and replace­
ment parts.
.,. New tires do not yet have the
optimum g ripping properties .
Drive carefully and at mode rate
speeds for the first 350 miles
(500 km) with new tires.
.,. Only use tires with the same de­
s ign , size (rolling circumfer­
ence), and as close to the same
tread pattern as possible on all
four whee ls .
.,. Do not replace tires indiv idually .
At least replace both tires on the
same ax le at the same time .
.,. Audi recommends that you use
A udi Original Tires . If you would
like to use different tires , please
note that the tires may perform ...
337

Cl a:, ...... N
" N ...... 0
0
::r ' be five 150 lb s. pa ssenge rs in
y o ur vehi cle, th e am ount of
ava ilable cargo a nd lu ggage
l oa d cap acity is 650 lb s.
(1400-750 (5
X 150) = 650
lb s.)
5 . Determine th e combined
w eight of lu gga ge and cargo
bein g load ed on the vehicle .
Th at w eight m ay not sa fel y
ex ­
ceed th e av ail able car go and
lu ggage l oad capa city ca lc ul at­
e d in St ep 4 .
6 . If your vehicle will b e to wing a
tr ail e r, load from your tr ailer
will b e tran sferr ed to your
v e­
hi cle . C on sul t thi s manual t o
dete rmin e how this re du ces
th e av ailabl e c argo and lug­
ga ge load cap acity o f your vehi­
c le.
.,. Che ck th e tir e s idewall
(c:::> p ag e 33 1, fig. 269) to det er­
min e the de signated load r ating
for a specific tire.
Wheel bolts and rims
Wheel bolts
Wheel bolts must be clean and loosen/t ighten
eas ily .
Rims
Rims w ith a bolted rim ring* o r with bolted wheel
cove rs* consis t of multip le pieces. These compo­
nents were bolted together using specia l bolts
Wheels
and a spec ia l proced ure. Yo u must not repair or
disass emb le them <::>
.&..
A WARNING
--
Wheel bo lts that are tightened or repaired in­
correct ly can become loose and resu lt in loss
of vehicle contro l, wh ich increases the risk of
an accident . For the cor rect tighten ing specifi­
cation, see <::>
page 362, Finishing .
-Always keep the wheel bolts and the
threads in the wheel h ub clean and free of
g rease .
- Only use wheel bolts that fit the rim .
- Always have damaged rims repaired by an
author ized Audi dealer or author ized Audi
Serv ice Facility . Never repair or disassemb le
rims yo urself, because th is increases the r isk
of an acc ident.
Winter tires
Winter tires sign ifican tly imp rove the vehi cle's
handling when dr iv ing in winter conditions . B e­
ca use of their const ruct ion (w idth, compou nd,
tread pattern), summer tires provide less trac ­
tion on ice and snow .
.,. Use winter tires on all four wheels.
.,. On ly use winter tires that a re app roved fo r yo ur
ve hicle.
.,. Please not e that th e maximum permitted
speed may be lower with winter ti res
c:> &. in
General information on page 330 .
An author­
ized Aud i dealer or authori zed Aud i Serv ice Fa­
cility can inform you about t he maximum per ­
m itted speed for your tires .
.,. Check the tire p ressure afte r insta lling wheels
<::> page 340 .
The effectiveness of w inter tires is reduced great­
ly when t he tread is wo rn down to a depth of
0.16 in (4 mm). The cha racter istics of w inte r
t ir es also decrease g reatly as the t ire ages, re ­
gard less o f th e rem aining t read.
@ For the sake of the environment
Reinstall summer tires at the app ropr iate
time , beca use they prov ide bette r handling
when roa ds are free o f snow and ice. Summer ..,.
345

Emergency assistance
vehicle tool kit) ¢ fig. 280 and place it on a
clean surface.
• Then install the alignment pin (from the vehicle
tool kit) by hand into the empty wheel bolt hole
¢fig. 2a11>.
• Remove the rest of the wheel bolts .
• Remove the wheel ¢@ . The al ignment pi n re-
mains in the hole while doing this .
Install a wheel
Read the direct ions on c> page 362 when instal­
ling unid irectional tires.
• Slide the wheel on over the alignment pin¢@ .
• Install the wheel bolts and tighten gently using
the hex socket.
• Remove the alignment pin and also tighten the
remaining wheel bolt.
• Carefully lower the vehicle using the vehicle
jack* .
• Tighte n the wheel bolts in a diagona l pattern
u sin g the wheel wrench.
The whee l bolts must be clean and loosen/tight­
en easi ly. Check the contact su rfaces for the
wheel and hub . Contaminants on these surfaces
m ust be removed before installing the wheel.
A WARNING
Never use the hex socket in the screwdriver
hand le or the hex socket wrench with the
ratchet to loosen or tighten the wheel bolts.
You will not attain the required tightening
specification, which wi ll increase the risk of an
accident .
@ Note
When removing or installing the whee l, the
r im could hit the brake rotor and damage the
rotor. Work carefu lly and have a second per­
son help you.
-
1
> A pp lies to vehicles with cer amic br ake rot ors*: use a sec ­
on d alignment pin * (fro m th e ve hicle t ool kit) for th e low ­
e st hole ac co rding t o the steps de scribed for the first
al ig nm ent pin.
362
(D Tips
-When mounting tires with unidirectional
tread design
make sure the tread pattern is
pointed the right way
c> page 362.
-Th e wheel bolts should be clean and easy to
turn. Check for dirt and corrosion on the
mating surfaces of both the wheel and the
hub. Remove all dirt from these surfaces be­
fore remounting the wheel.
Unidirectional tires
A un idirectional tire profi le is identified by arrows
that point in the running direct ion on the tire
s idewa ll. You must always adhere to the speci­
fied running direction. This is necessary ensure
t h e tire's optimum performance in regard to ad­
hesion, running noise, friction and hydroplaning .
To benefit fully from the advantages of the uni­
directional tire design, you should rep lace fau lty
tires as soon as possible and restore the correct
running direction on all of the tires.
Finishing
• Reinstall the caps on the wheel bolts if neces­
sary.
• Store the veh icle tool k it in its designated
place .
• Store the replaced tire securely in the luggage
compa rtment
¢page 257.
• Check the tire pressure on the insta lled wheel
as soon as possible.
• Cor rect the tire pressure and store it in the In­
fotainment system ¢
page 349.
• The wheel bolt tightening specification must be
120 ft lbs (160 Nm). Check it as soon as possi­
ble with a torque wrench. Drive carefully until
then .
• Have the faulty wheel replaced as quickly as
possible .