2018 AUDI A8 ESP

Seats and storage
Rear seats
Adjusting the rear seats
Applies to: vehicles w ith power adj ustable rear seats
F ig. 64 Passenger side rear seat : seat ad justment buttons
F ig. 65 Rear doo r: memory function buttons
Adjusting lumbar support
.,. To adjust the curvature of the lumbar support,
press the button @to the left/right .
.,. To adjust the height of the lumbar support,
press the button@upward/downward.
Adjusting the head restraint angle
.,. To adjust the head restraint so that it is more
vertical/more angled, press the button @ for­
ward/back.
Adjusting the seat position
.,. To adjust the seat forward/back, press the but ­
ton © forward/back .
.,. To move the seat up/down, press the button©
upward/downward.
Adjusting the massage function*
.,. T o adjust the "pulsating" /"wave" massage
function, press the button ® to the left/right .
The massage function is at its strongest level
when three L EDs in the button turn on.
56
.,. To red uce the massage leve l, press the ® but­
ton again.
.,. To switch the massage function off, press the
button repeatedly until the LED turns off.
Adjusting the reclining position
.,. To adjust the reclining position, press and hold
the button ® until the seat reaches its end po ­
sition .
.,. Applies to vehicles with reclining seat*: if you
select the reclining position, the front passeng­
er's seat moves forward and the backrest re­
clines . Depending on the last setting, the leg
support may fold out at the same time . The
front passenger's seat can no longer be used in
the reclining position
¢.&_ .Yo u can adjust the
leg support or fold the display forward in the
reclining position.
Selecting the standard seat position
.,. To adjust the standard seat position, press and
hold the
button (!) until the seat reaches its
end position .
.,. App lies to veh icles w ith reclin ing seat*: if you
select the standard seat position, the front pas­
senger's seat moves back into the normal posi­
tion, the head restraint moves to the upright
position and the leg support folds
inward¢.&_ .
Adjusting the display*
.,. To tilt the dis play forward/back, press and hold
the left/right button @until the disp lay reach­
es the desired position .
.,. Applies to vehicles with reclin ing seat*: to
ma intain a clear view of the road when the seat
is in the reclining posit ion, press and hold the
right button @until the display has folded for ­
ward. Make sure the driver has a clear view of
the exter ior mirrors .
If so, confirm the quest ion
in the Infotainment system with
Yes . If you an­
swe r
No or do not respond to the question, the
display will return to the upright position.
Adjusting the leg support (vehicles with
reclining seat*)
Requireme nt: th e reclining position must be se-
l ected
¢ page 56. .,..

Seats and stor age
Massage types
@ -Wave
@-Pulsating
© - Stretch
@-Lumbar
(D Tips
-The massage function switches off a uto­
matically after approx imately 10 minutes.
- If you activate a massage type again, the
l ast selected intensity and speed w ill be
se­
lected.
Comfort settings
A pp lies to: ve hicles w ith comfo rt seats in t he rea r
You con also apply several settings for the rear
using the Infotainment system in the cockpit .
.. Select in the MMI: I CAR j function button> Car
s y stem s
control but ton > Vehicle s etting s>
Seats > Rea r seat s.
Approa ch norma l position
-with this funct ion,
the o ute r rear seats and the front passenger's
seat are moved to the facto ry setting.
Ea sy se at entry -the Easy s eat entry makes it
possible to enter and exit the rea r seats comfort­
ab ly. If the function is sw itched on, the rear seat
automatically moves all the way back when the
corresponding door is opened.
Pa ss e nge r seat adju stment * -if the funct ion is
sw itched on in the Infotainment system, the
front p assenger's seat can also be adjusted from
the rear seat using the
¢ page 56, fig. 64 but ­
tons.
The front passenger's seat cannot be adjusted, if
-the front passenger's seat memory function is
switched off
c:> page 59 .
-the~ button turns on in the driver's door
c:> poge 37 .
-The r ight l±l button turns on in vehicles with
power chi ld safety locks*
c:> poge 37 .
58
Head restraints
Adjusting the head restraints
Fig. 67 Comfort head restraint : adjusting the s ide bolsters
Fig. 68 Outer rea r seat : adjust ing the head restrain t
Adjust the head restraints so the upper edge is as
even as possible w ith the top of your head. If that
i s not possib le, try to adjust as close to th is posi­
t ion as poss ible.
Adjusting the front head restraints
.. To adjust the he ight of the front head re­
straints, pull/press the button ©
c:> page 54,
fig . 60
up/down.
.. To adjust the side bolste rs*, push the s ide bo l­
s t ers in to the desired position
c:> fig . 67.
.. Vehicles with reclini ng seat*: grab the head re ­
s t rai nt a t the sides with both hands and s lide
the head restraint up/down unti l it clic ks into
place.
Adjusting the rear head restraints
The center head rest raint in the rear is not ad­
just able. When passengers r ide in the outer rea r
seats, ra ise these head restraints up to the top
position
c:> ,&. . .,._

u. co .... N
" N .... 0 0 :c ' ~ To move t he head restraint up, ho ld it at the
sides with both hands and slide it upward unti l
you fee l it click into place.
~ To move the head restraint down, press the
button (small
arrow)¢ fig. 68 and slide the
head restraint downward.
A WARNING
Always read and follow the applicab le wa rn­
ings
¢page 211.
Memory function
Description
Applies to: vehicles with memory function
-
Using the memory function, you can quickly and
eas ily store a personal seat profile for the driver
and front passenger as well as for the outer rear
seats* and recall the settings. The memory func­
tion is controlled us ing the remote control key
and the memory buttons in the drive r's/front
passenger's door and in the rea r doo rs*.
The driver's seat profile is stored again and as­
signed to the remote control key each time the
ve hicle is locked. When you open the door, the
seat profi le is automat ica lly reca lled. If two pea-
Remote control
key
Driver
Seat X
Hea d rest raint X
Steering wheel* X
Sa fety belt* X
Both exterior mirrors* X
Remote control key
Applies to: vehicles with memory function
The functio n must be switched on so that the
d river's seat p rofile will be assig ned to t he re ­
mote cont rol key w hen locking the vehicle .
~ Select: the ICARI function button > Car systems
contro l bu tton > Vehicl e setting s > Driver' s
s eat > Remo te control ke y > On.
Seat s and sto rag e
(D Tips
To prevent the head restraints from running
i nto the headline, they are automatically
moved forward or upward when the seat is
adjusted.
ple use the vehicle, it is recommended that each
person always uses the ir "own" remote control
key.
T wo seat profiles can be stored using the memo ­
ry buttons in the driver's/front passenger's door
respectively, and one seat profile can be stored in
each of the rear doors*. Once they are stored,
these seat profiles can be selected at any time.
The following sett ings are stored:
Memory button
Driver Front passenger Outer rear seats*
X X X
X X
X X X
X
(D Tips
If yo u do not wish to have t he seat profi le for
another dr iver assigned to the remote cont rol
key, sw itch the memory function
off in the In­
fotai nment system or using the
!O FF ! button
¢page 60.
59

Seats and storage
(D Note
Beverage containers in the cup holders should
always have a lid. If not, beverages could spill
and cause damage to vehicle equipment, such
electronics or seat covers.
Cooled glove compartment
The cooled glove compartment only functions
when the A/C system is switched on.
Fig. 77 Glove compar tment: switching cooling mode on/
off
.. Turn the knob @counter-clockwise to switch
the cooling on. The symbols on the knob indi­
cate the correct position.
.. Turn the knob @clockwise to switch the cool-
ing off .
The glove compartment cooling mode only func­
tions when the vehicle A/C system is switched on.
If the heating is switched on, switching the glove
compartment cooling mode off is recommended.
A WARNING
-
Always leave the lid on the glove compart­
ment cover closed while driving to reduce the
risk of injury.
(D Tips
The glove compartment can be locked using
the mechanical key.
Additional storage compartments
You will find a range of storage compartments
and hold ers at different locations in the vehicle.
- Compartments in the doors
64
- Net in the front passenger footwell
- Glasses holder in the headliner (near the rear-
view mirror)
- Storage compartments under the center arm­
rest
- Compartments* on the backrests of the front
seats
- Garment hooks above the rear doors
- Compartment behind the rear center armrest
(on vehicles without a pass-through* or refrig­
erator*)
- Cell phone holder* in the right rear door
- Bag hooks* in the luggage compartment
A WARNING
-When driving, do not leave any hard objects
on the rear window shelf or allow your pet
to sit on the shelf. They could become a haz­
ard for vehicle occupants in the event of
sudden braking or a crash.
- Any articles of clothing that you have hung
up must not interfere with the driver's view .
The coat hooks are designed only for light­
weight clothing. Never hang any clothing
with hard, pointed or heavy objects in the
pockets on the coat hooks. During sudden
braking or in an accident
-especially if the
airbag is deployed
-these objects could in­
jure any passengers inside the vehicle .
- To reduce the risk of personal injury in an
accident or sudden stop, always keep the
glove compartment closed while driving.
- Read and follow all WARNINGS
~ page 245, Important safety instructions
on the side airbag system.
- Hang clothes in such a way that they do not
impair the driver's vision.
- The coat hooks must only be used for light­
weight clothing. Do not leave any heavy or
sharp edged objects in the pockets which
may interfere with the side curtain airbag
deployment and can cause personal injury in
a crash.
- Do not use coat hangers for hanging cloth­
ing on the coat hooks as this can interfere
with proper deployment of the side curtain
airbags in an accident.

u. co .... N
" N .... 0 0 :c ' Warm and cold Deluxe automatic
climate control
Description
The climate control system warms, cools and re ­
moves humidity from the air in the vehicle interi­
or. It is the most effective when the windows and
sunroof* are closed. If there is a build-up of heat inside the vehicle, ventilation can help to speed
up the cooling process .
In all heating mode functions, except for defrost,
the blower only switches to a higher speed once
the engine coolant has reached a sufficient tem­
perature .
Pollut ant filt er
The po llutant filter removes pollutants such as
dust and pollen from the air.
Ke y r eco gnition
The climate control settings are a utomatically
stored and assigned to the remote control key
that is in use .
A WARNING
Poor visibility can lead to accidents.
- For safer driving, keep all windows free of
ice, snow and fog .
- Become familiar as quickly as possible with
the correct use and function of the climate contro l system, especially with the defrost­
ing and defogging function.
- When the temperature is below freezing,
only use the windshield washer system after
Warm and c old
the windshield has been warmed by the cli­
mate control system. The washer fluid could
freeze on the windshield and impair visibili­
ty .
@ Note
-If you suspect that the climate contro l sys­
tem is damaged, switch the system off to
prevent further damage and have it checked
by an authorized Audi dealer or authorized
Aud i Serv ice Facility.
- Repa irs to the Aud i climate control system
require special technical knowledge and
special tools . See an authorized Aud i dealer
or authorized Audi Serv ice Fac ility .
@ For the s ake of the environment
Reducing the amount of fuel used also re­
duces the amount of pollutants that enter the
a ir .
(D Tips
- To prevent interference with the heat ing
and cooling output and to prevent the win­
dows from fogging over, the a ir intake in
fro nt of t he w indshie ld must be free of ice,
snow or leaves.
- Condensat ion from the coo ling system can
dr ip and form a pudd le of water under the
veh icle . T h is is no rma l and does not mean
there is a leak .
- Th e energy management system may tem­
porarily switch off certain functions, suc h as
the seat heating* or rear window defogger .
T hese systems are avai lable again as soon
as the energy supply has been restored.
69

u. co .... N
" N .... 0 0 :c ' Driving
General information
Breaking in
A new veh icle must be broken in for the first
1,000 m iles ( 1,500 km). Do not dr ive at speeds
that will ex ceed 2/3 of the max imum perm itted
engine speed (RPM) for the first 600 miles
(1,000 km), and avoid full acceleration during
this period . You may gradually start increasing
the RPM and the speed between 600 miles (1,000 km) and 1,000 miles (1,500 km) .
During the first hours of use, the engine has a
h igher internal friction than later on when all
moving parts have settled into p lace with each
other.
How the vehicle is driven d uring the first 1,000
miles (1 ,500 km) also affects t he engine quality .
Drive at moderate engine speeds after the initial
break-in per iod, part icu larly when running a cold
engine . Th is will reduce eng ine wear and improve
the m ileage .
Do not drive at too
low of an engine speed (RPM).
Shift down if the engine stops running "smooth­ ly". Extremely high eng ine speeds are automati­
cally reduced .
New tires
If your vehicle is running on new t ires, dr ive pa r­
ticularly ca refu l for the first 350 miles (500 kilo­
mete rs) after fi tting .
A WARNING
New tires tend to be s lippery and must also
be "broken -in" . Be sure to remember this dur­
ing the first 350 miles (500 ki lometers).
Brake gently . Avo id following closely behind
other vehicles or other situations that might
require sudden, hard brak ing .
-
Driving
Reducing the risk of vehicle damage
(UJ) Note
When dr iv ing o n poor roads, by curbs and on
steep ramps, make sure that low -hanging
components such as the spoiler and exhaust
system do not come into contact with these
or they co uld be damaged. This espec ia lly ap­
plies to vehicles w ith low ground clearance
and vehicles that are heav ily loaded.
Driving through water on roads
Note the following to reduce the risk of veh icle
damage when dr iving through wate r, fo r example
o n flooded roads:
- The water must not be any higher than the bot­
tom of the veh icle body .
- Do not dr ive faster than walk ing speed .
A WARNING
-
After driv ing through water or mud, the effec ­
tiveness of the b rakes may be reduced due to
moisture o n the brake rotors and brake pads.
A few ca refu l bra ke app lications sho uld d ry
off the brakes and restore the fu ll braki ng ef ­
fect.
(UJ) Note
- Vehicle components such as t he e ng ine,
t ra nsmission, suspe nsion or elect rical sys­
t em can be seve re ly damaged by driv ing
throug h water .
- Alw ays sw itch the Start/Stop system off
w hen driv ing th ro ugh water
q poge 78.
(D Tips
- Determine the depth before d riving throug h
wate r.
- Do not stop the vehicle, drive in reverse or
sw itch t he e ngine off when d riving through
wate r.
- Keep in mind that o ncom ing vehicles may
cr eate waves that raise the wa ter level and
m ak e it too deep for yo ur vehicle to drive
throug h safe ly.
73

Drivin g
-Avoid driving through sa lt water, because
this can cause corrosion .
Economical and environmentally-friendly
driving
The amount of fuel consumption, the env iron­
mental impact and the wear to the engine,
brakes and t ires depends mostly on your dr iv ing
style. W it h an anticipatory and economic dr iv ing
style , fu el consumption can be reduced by ap ­
p roximate ly 10 -15% . The following tips wi ll help
you conserve the environment and your money at the same time .
Anticipatory driving
A veh icle uses the most fuel when acce le rating.
When you dr ive with ant ic ipat io n, you do no t
need to brake as often and so you accelerate less .
When possib le, let your vehicle coast with a
gear
eng aged ,
for example, when you notice that the
next traffic light is red. This produces an engine
braking effect, which helps to protect the brakes
and tires and reduces the emissions and fuel con­
sumpt ion to zero (fuel shut -off during decelera­
tion) .
Shift efficientl y
Upshifting earlier is an effective way to save fuel.
Staying in a gear too long uses fue l unnecessari­
ly . Press down on the accelerator pedal slowly
and avoid "k ick-down" .
Avoid full accel eration
You shou ld rare ly trave l at the maximum vehicle
speed. High speeds cause a disproportionately h igh increase in fuel consumption, emissions and
traffic no ise . Slower driving saves fuel.
Reduce idlin g time
The Start/Stop system* he lps to reduce the idling
time automatically. In vehicles without the Start/
Stop system*, it is efficient to switch the eng ine
off when stopped at ra ilroad crossings and long
red l ights . Stopp ing the engine for 30 -40 sec­
onds already saves more fuel than the amount of
ext ra fuel needed to resta rt the eng ine.
74
It takes a ve ry long time in id le to warm the en­
gine up to operating temperature. Wear and
emissions are especially high in the warm -up
phase. Therefore, you shou ld begin driving im­
med iate ly after starting the engine. Avoid high
RPMs while doing this .
Hav e maintenance perfo rmed regul arly
By having maintenance performed reg ularly on
your vehicle, you can help to reduce fuel con­
sumption before you even start to drive. The maintenance condition of your vehicle not on ly
affects traffic safety and long-term value but al­
so impacts fuel consumpt ion. A poorly main­
ta ined engine can lead to fuel consumpt ion that
i s 10% hig he r th an no rma l.
Avoid short trip s
The engine and exhaust cleaning system must
reach their optimal operat ing temperature to ef­
fect ively reduce consumpt ion and emissions .
A cold engine uses a d isproportionately high
amount of fuel. The engine reaches operat ing
temperature and consumption normalizes only
after approximately 2 .5 m iles (4 km) .
Check the tire pressu re
To save fue l, make sure the t ires are always in­
flated to the correct pressure
¢ page 291. The
fuel consumpt ion can increase by 5% if the pres­
sure is only 0 .5 bar too low . Due to the increased
r oll ing resistance, low tire p ressures w ill also
l ead to greater tire wear and will affe ct driv ing
behav ior.
Drive w ith summer tires when poss ible because
t hi s can increase fue l economy by up to 10% .
Eliminate unnecessary weight
Since every pound of extra weight increases fuel
consumption, it pays to remove any unnecessary
weight.
A roof rack increases the w ind resistance on the
vehicle and shou ld be removed when it is not
needed. You will save approximately 12% of your
fuel when at speeds from 62-75 mph (100-120 km/ h).
.,.

Drivin g
During emergency braking, your vehicle will
brake sim ilar to heavy brak ing. ESC and the
associated components (ABS, ASR, EDL)
cannot overcome the laws of physics . In cor­
ners and when road or weather cond it ions
are bad, a full b rake applicat ion ca n cause
the vehicle to skid o r the rear end to swerve,
wh ic h increases the r is k of an accident.
- If the powe r supply fa ils, you cannot set the
par king b rake if it is re leased. In th is case,
par k the vehicle on level ground and secure
it by placing the selector lever in the P posi­
tion . See an authorized Audi dea ler or a u­
thorized Audi Service Facility for assistance .
- Always take the vehicle key with you when
leaving your vehicle, even fo r a short period
of time . This applies particular ly w hen ch il­
dren rema in in the vehicle. Otherwise ch il­
dren could start the engine, release the
park ing brake or operate electrical eq uip­
ment such as powe r windows, which in­
c reases the risk of an acc ident.
- No one sho uld rema in in the vehicle when it
is locked - especially ch ild ren. Locked doo rs
make it mo re diff icu lt fo r eme rgency wor k­
ers to get into the vehicle, which puts lives
at r is k .
0) Tips
When stopping at a traffic s ignal or stopping
in c ity traffic, you can set the parking b rake
manually. The vehicle does no t have to be
he ld w it h t he br ake peda l. The parking b rake
elim ina tes the tendency to creep when a se ­
lecto r lever position is engaged . As soon as
you p ress t he accelerator pedal, the parking
brake releases automat ica lly and your vehicle
starts to move
c::, page 82.
(D Tips
- Occasiona l noises when the parking brake is
set and re leased a re normal and a re not a
cause for concer n.
- The park ing bra ke goes thro ugh a se lf-test
cycle at regular intervals when the ve hicle is
stopped. Any noises associated w ith this a re
normal.
82
- If there is a powe r fail ure, the par king b rake
wi ll not set if it is released, and it wi ll not
re lease if it is
set ~.&. . See an a uth orized
Audi dealer or author ized Audi Se rvice Fa­
cility for assistance.
Starting to drive
Various convenience and safety f unct ions may be
available when the vehicle begins dr iving, de­
pendi ng on vehicle equipment .
Starting on hills with th e pa rking brake set
Requirement: the driver's door must be closed
and the driver's safety belt must be fastened.
.,. To sta rt driving comfortably when on a h ill, set
the parking brake and begin driving as usu a l.
The braking force of the parking brake does not
release automatically unt il the whee ls build up
enoug h driving force.
Starting on hills with hill hold assist
Hill hold assis t makes it easier to start on hills.
Requireme nt: the d rive r's doo r must be closed
and t he engine must be runn ing.
.,. To activate h ill hold assist, press and hold the
brake pedal for several seco nds . The vehicle
m ust be in an uphill d irect io n of t ravel.
After re leas ing the brake pedal, the brak ing pow­
er is maintained for a brief moment
c::, &. to pre ­
vent the veh icle from rolli ng back w hen starting.
Du ring this t ime, you can easily begin to move
yo ur vehicle.
_8. WARNING
Applies to: vehicles with hill hold assist
-If you do not beg in d riving immed iate ly or
the engine stalls after releasing the bra ke
pedal, your veh icle may beg in to roll back­
ward. Press the brake pedal or set the park­
ing brake immedia tely.
- The inte lligent technology of hill ho ld assist
cannot ove rcome the limitat ions imposed by
natural p hys ica l laws. The increased comfort
offe red by hill ho ld assist should not cause
you to t ake safety r is ks.