Ass is tance sy stem s
-The camera field of view ¢ page 134, fig. 136 is
dirty or covered in ice. Clean this area on the
windshield.
-The camera field of view is fogged over. Wait until the fog has cleared before switching the
active lane assist on again.
-The system has been unable to detect the lanes
for an extended period of time due to road con
ditions. Switch active lane assist back on when
the lines are more visible .
fl1 Audi acti ve lan e ass is t: curr entl y una vailabl e
There is a temporary active lane ass ist ma lf u n c
tion . Try sw itching the act ive lane assist on aga in
later.
fl1 Aud i activ e lane ass is t: Pl ea se ta ke over
stee ring!
This message appears if you are not steering by
yourse lf . Active lane assist is activated, but is not
ready to give wa rning
.&_ WARNING
Note that messages may be delayed or not
displayed on vehicles with accessor ies mount
ed on the steering whee l, s uch as a steering
wheel spinner knob . Always keep your hands
on the steering whee l.
Setting the vibration warning
Applies to: vehicles with Audi active lane assist
-
You can adjust individual Audi active lane assist
settings in the Infotainment system .
.. Select in the Infotainment system : I MENUI but
ton
> Vehi cle > left contro l bu tton > Dri ver a s
s is tan ce
> Audi active lane as sist .
V ibration warning
You can switch the additional vibration wa rning
in the steering wheel on or off.
.&_ WARNING
-
With the v ibration warning switched off,
there w ill also be no visual warn ing in the in
strument cluster display when crossing a lane
marker line.
136
@ Tips
Your settings are automatically stored and as
signed to the remote contro l key being used.
Audi side assist
Description
Applies to: vehicles with Audi side assist
Fig. 138 Sensor detect ion range
Fig. 139 Dis pl ay on t he exterio r mir ror
Side assist (lane change ass ist) helps you monitor
your blind spot and traffic behind your vehicle .
Within the limits of the system, it warns you
about veh icles that are com ing closer or that are
traveling w ith you wi thin sensor range
(D
¢ fig. 138. If a lane change is classified as cr iti
ca l, the display @in the exterior mirror tu rns on
¢ fig. 139 .
The display in the left exte rior mirror provides as
s istance when making a lane change to the left,
whi le the display in the right exterior m irror pro
vides assistance when making a lane change to
the right.
Information stage
As long as you do not act ivate the tu rn signal,
side ass ist
informs you about vehicles that are
LL co ..... N
" N ..... 0 N > co
(D Tips
-Side assist is not active w hile you are mak
i ng the ad justment.
- Your settings are automatically stored and
ass igned to the remote control key being
used.
Rear cross-traffic assist
App lies to: vehicles with rear cross-traff ic assist
Fig. 14 2 Example display
Fig. 143 Infotainment system: rear cross -traffic ass ist dis
play
Activating rear cros s-traffic assist
The rear cross- traffic assist is ac tivated a utomat i
cally if you t urn on the pa rking aid
¢ page 143 or
shift into reverse gear.
The rea r cross- traffic assist can warn t he drive r of
a potential collis ion with approaching cross-traf
f ic when driving in reverse at speeds up to ap
proximately 7 mph ( 12 km/h). Within its limits,
the system monitors the areas behind and next
to the veh icle using the radar sensors when leav
ing a parking space
c:> page 137, fig . 141. Moving
objects that are approaching, such as cars, are
detected
c:> fig . 142.
If the system detects cr itical cross traffic when
backing out of a parking space, it will react as fol
lows:
A ssi st a nce systems
- Visual indicator : an indicator appears in the In
fotainment system disp lay with a red arrow
symbo l. The arrow points in the d irect ion from
which the object is
approaching ¢ fig. 143.
-Audible warning signal : a continuous tone may
sound as an addit ional indicator when dr iving in
reverse.
- Automat ic brake acti vation : a brief activation
of the brakes may also warn you of a potent ial
collision w ith an approaching object.
The audib le warning signal and the automatic
bra ke activation occur only when driv ing in re
verse.
A WARNING
-- The rear cross-traffic assist is an assist sys
tem and cannot prevent a co llision by itself .
The drive r must always intervene . T he d river
is always respons ible for b raking at the cor
rect t ime.
- Please note that the rear cross-traff ic assist
may activate the b rakes unexpe cted ly. Se
cure a ny cargo th at you are transpor ting to
redu ce t he risk of damage or i njury.
- An add itiona l brake activation may be t rig
ge red w ith in 10 seconds after an automatic
b rake activation.
- I f the re is an acoustic wa rn ing s ignal from
the rea r cross-traffic ass ist, t hen the p ark
ing sys tem may not warn you of detected
obstacles under certain circumstances.
- The v iew o f the radar sensors may be im
pa ired by leaves, s now, heavy sp ray or dirt.
Clean the area i n front of the sensors
c:>page 137, fig. 141 .
A WARNING
-
-The rear cross -traffic assist will not provide
alerts if your vehicle is pulled too far into
the parking space so that it is hidden by ad
jacent vehicles.
- The rear cross-traffic assist will not provide
alerts about people a nd can not warn you
about every type of approaching objects,
such as cyclists. Always monitor the t raff ic
as we ll as the vehicle's sur roundi ngs wit h di-
re ct eye contact .
~
139
Assistance systems
Adjusting the Individual mode
You can adjust the vehicle settings to your personal preferences.
~ Select: I MENU I button >Vehicle> Audi drive
select> Individual >
right control button.
After you have closed the settings, you will auto
mat ica lly dr ive in the
Individual * mode.
Systems comfort
Engine /transmission
comfortab le
Steering comfortab le
Engine sound* subtle
Audi adaptive cruise control* comfortable
Suspension control* comfortable
quattro * balanced
Applies to: RS models:
quattro balanced
a) Subtle in t he selector lever position "D" and sporty in "S".
(0 Tips
Your Individual * mode settings are stored au
tomatically and assigned to the remote con
trol key in use.
142
The systems you can adjust depend on the equip
ment and engine in your veh icle. The following
table g ives an overview of the characterist ics.
auto dynamic
ba
lanced sporty
ba lanced sporty
subtle/sportyal sporty
ba lanced sporty
ba lanced sporty
ba lanc ed sporty
neutral sporty
u. 00 ... N l' N ... 0 N > 00
wheel until the orange orientation lines appear
in the parking space
¢ fig. 151 . Use the mark
ings@to help you est imate the distance from
an obstacle . Each marking represents approxi
mately 3 ft (1 m). The blue area represents an
extension of the veh icle 's outline by approxi
mately 16 ft (5 meters) to the rear.
"'While driv ing in reverse gear, adjust the steer
i ng wheel ang le to fit the parking space using
the orange o rientation l ines fo r ass istance
¢ .&. in General information on page 145, ¢{!)
in General information on page 146 .@ repre
sents the rear bumper. Stop the vehicle, at the
latest, when the red orientation
line@ borders
an object.
Adjusting the parking aid
Applies to: vehicles with parking system plus/rearview cam·
era
The functions are adjusted in the Infotainment
system .
"'Select in the Infotainment system: !MENUI but
ton
> Vehicle > left contro l button > Driver as
sistance> Parking aid.
Or
"'When the parking aid is active, select in the In-
fota inment system : right control button*.
End system* -stop the parking aid
Activate automatically -switch automa tic activa
tion on/off
Front volume* -volume for the front area
Rear volume -volume for the rear area
Entertainment fader -the volume of the audio/
video source is lowered when the parking system
is turned on .
The new value is given briefly during the adjust
ment .
(D Tips
-Several menus can be accessed with the
right control button only when the parking
aid is active.
- The settings for volume and automatic acti
vation are automatically stored and as-
Parking aid
signed to the remote control key being
used.
Error messages
Applies to: vehicles with parking system plus/rearview cam
era
Ill Rear park assist: malfunction! Obstacles
cannot be detected
Ill Front park assist: malfunction! Obstacles
cannot be detected
Ill Park assist: malfunction! Obstacles cannot
be detected
When one of these messages appears, there is a
system malfunction. The L ED in the
PwJi button al
so blinks when sw itching it on. The relevant mes
sage o nly appears again when you manually acti
vate the park ing aid with the button.
111 Rear parking aid: obstacle detection restrict
ed
The rear cross -traffic assist* ¢ page 139, Rear
cross-traffic assist
is not available. Either the ESC
is switched off, or the radar sensors may be cov
ered by a bike rack, stickers, leaves, snow or oth
er objects. Switch the ESC on, or clean the area in
front of the sensors if necessary ¢
page 13 7,
fig. 141 . If this message continues to be dis
played, drive immed iate ly to an author ized Audi
dealer or authorized Audi Service Fac ility to have
the malfunction repaired .
Parking system plus*
If a sensor or speaker is faulty, the J;!/4'. symbol
will appear in front of/behind the vehicle in the
Infotainment system display. If a rear sensor is
faulty, only obstacles that are in areas@ and @
are shown ¢
page 143, fig. 145 . If a front sensor
is fau lty, only obstacles that are in areas © and
@ are shown.
147
Audi conn ect e-tron ser vic es
Vehicle status report
Applies to: vehicles with Audi connect e-tron services
You can access various vehicle statuses using the
services, such as:
- high-voltage battery charge level ,
- electric range,
- mileage,
- next inspection.
F or additional information, s ee
¢ page 95, Power
meter overview
and ¢ page 97, Range display.
A WARNING
Do not ignore messages and warning or indi
cator lights that turn on in the vehicle be
cause of the information in the status report.
Th is could lead to break downs in on the road,
accidents and se rious injuries.
Car Finder
Applies to: vehicles with Audi connect e-tron services
The vehicle collects data under certain conditions
and sends it to a server .
When data is stored, you can access values such
as these us ing the service:
- Vehicle location disp lay,
- Display of one's own location,
- Ro ute to your veh icle.
If your mobile device also has a nav igation func
tion, you can navigate to your last know n parking
locat ion.
@ Tips
- The new parking location cannot be deter
mined with this service if the vehicle is
moved after shutt ing the veh icle
off and
wi thout sw itching the ign ition on and
off
again, for example when be ing towed o r if
the vehicle is stolen .
- If the vehicle is moved an d shut
off again
us ing the second key, for example, the new
parking location is t ransmitted to the server
after switching the ignition off .
200
Charging
Applies to: vehicles with Audi connect e-tron services
You can control and access the hig h-voltage bat
tery c harging proc ess r emotely using these serv
i ces. You have the following options:
- check the battery charge leve l,
- star t/end t he cha rging process,
- prog ram the charging t imer with/w itho ut cl i-
mate cont rol,
- deactivate/activate the cha rg in g timer .
Fo r addi tional information,
see ¢ page 106,
Charging the battery with the Audi e-tron charg
ing system .
A WARNING
Only perform charging f unctions on the high
voltage battery if the vehicle is shut
off co r
rect ly, is connected to a suitable socket and if
the ign ition is swi tched off.
Temperature control
Applies to: vehicles with Audi connect e-tron services
You can contro l the climate control in your vehi
cle remotely using these services:
- start/end climate control ,
- program the timer,
- deactivate/activate the timer.
For addi tional informa tion, see
¢ page 116, Cli
mate control .
A WARNING
Only perform the climate control functions if
your vehicle was shut
off correct ly and the ig
n ition is switched off.
u. 00 .-< N l' N .-< 0 N > 00
Although your Audi is equipped with ai rbags, yo u
still have to wear the safety belts provided. Front
airbags, for examp le, are activated on ly in some
frontal coll is ions. The front a irbags are not acti
vated in all frontal coll is ions, in side and rear col
lisions, in roll overs or in cases where there is not
enough deceleration through impact to the front
of the vehicle. The same goes for the other airbag
sys tems in yo ur Audi . So, always wea r you r safety
be lt and ma ke sure eve rybody in yo ur vehicle is
properly restrained!
Important safety instructions about safety
belts
Safety belts must always be correctly positioned across the strongest bones of your body.
~ Always wea r sa fety be lts as i llust ra ted and de
scribed in this chapter.
~ Make sure that your safety belts are a lways
ready for use and are not damaged .
A WARNING
Not wearing safety belts or wearing them im
properly increases the risk of serious personal
injury and death . Safety be lts can work only
when used correctly.
- Always fasten your safety belts correctly be
fore dr iving off and make sure all passen
gers are correct ly restrained.
- For maximum protection, safety belts must
always be pos it io ned p roperly on the body .
- Never strap more tha n one person, includ
ing small ch ildren, into any belt .
- Never place a safety be lt over a chi ld sitt ing
on your lap.
- Always keep feet in the footwell in front of
the seat w hile the vehicle is be ing driven.
- Never let any pe rson ride w ith their feet on
the instrument pane l or st icking out the
window or on the seat .
- Never remove a safety belt while the vehicle
is mov ing. Do ing so w ill inc rease your r isk of
being in ju red or k illed.
- Never wear belts twisted.
- Never wear belts over rigid o r breakab le ob-
jects in or on your clot hing, such as eye
Safet y be lts
g lasses, pens, keys, etc ., as t hese may ca use
in jur y.
- Never a llow safety belts to become dam
aged by be ing ca ught in door or seat hard
ware.
- Do not wear t he shoulder part of the belt
under yo ur arm or otherwise o ut of pos ition.
- Several layers of heavy clothing may inter
fe re with co rrect pos ition ing of be lts and re
duce the ove rall effectiveness of the system.
- Always keep be lt buck les free of anything
that may prevent the buck le from latch ing
securely.
- Never use comfort cl ips or dev ices that cre
ate s lack in t he shoulder belt. However, spe
cial clips may be required for the proper use
of some child restraint systems.
- Torn or frayed safety be lts can tear, and
damaged be lt hardware ca n break in an acci
dent. Inspect be lts regularly . If webb ing,
b indings, buckles, or retractors are dam
aged, have belts rep laced by an author ized
Aud i deale r or q ualified wo rkshop.
- Safety belts that have been worn and loaded
i n an ac cident must be repla ced with the
cor rect replaceme nt sa fe ty belt by an a u
thor ized A udi dealer. Rep lacement may be
necessary even if damage cannot be clea rly
seen . Anchorages t hat we re loaded must a l
so be inspected.
- Neve r remove, modify, disassemble, o r try
to repair the safety belts yourse lf .
-A lways keep the belts clean. Dirty belts may
not wor k prope rly and ca n impair the func
tion of the inert ia reel
c> table Interior
cleaning on page 356.
263
LL co ..... N
" N ..... 0 N > co
Safety belt position
Correct belt position is the key to getting maxi
mum protection from safety belts .
~
"' ,-.
9 r
Fig. 231 Safety belt pos it ion
"' a,
Standard feat ures on your vehicle he lp you adjust
the position of the safety be lt to match your body
size .
- belt he igh t adjustmen t fo r the front seats *,
- height-adjustable front seats.
.8, WARNING
Improperly posit ioned safety be lts ca n ca use
ser ious personal inj ury in an accident .
- T he shoulder belt sho uld lie as close to the
center of the co llar bone as possible and
should fit we ll on the body. Hold the belt
above the latch tong ue a nd pu ll it evenly
across the chest so that it sits as low as pos
sible on the pelvis and there is no press ure
on the abdomen . The belt should always fit
snugly
Q fig. 231. Pull on the belt to tighten
if necessary.
- The lap belt portion of the safety be lt must
be pos itioned as low as possible across pel
vis and never over the abdomen. Make sure
the belt lies flat and snug
Q fig . 231 . Pull on
th e belt to tighten if necessary.
- A loose-fitt ing safety be lt can cause ser ious
injuries by shifting its pos ition on you r body
fr om the st rong bones to more vu lne rable,
soft tiss ue a nd c ause ser ious injury.
- Always read and heed all WA RN INGS and
other importa nt inform ation¢
page 263.
Safet y bel ts
Pregnant women must also be correctly
restrained
The best way to protect the fetus is to make sure
that expectant mothers always wear safety bel ts
correctly
-throughout the pregnancy.
F ig . 2 32 Safe ty bel t pos ition durin g pregnancy
To provide maximum protect ion, safety belts
must always be positioned correctly on the wear
er's
body ¢ page 265 .
.. Adjust the front seat and adjustable head re
straint*
correctly¢ page 59, Front seats .
.,. Pull the safety belt evenly across the chest so
that it s its as low as possible on the pelvis and
there is no pressure on the abdomen
¢ fig. 232, Q .&, .
.,. Insert the tongue into the co rrect buckle of
your se at unt il yo u h ear i t latch secu rely.
.. Pull on the belt to make sure that i t is sec urely
latched in the buckle.
_& WARNING
Improperly positioned safety belts can ca use
serious pe rsonal injury in an acc ident.
-Expectant mothers m ust always wea r th e
lap portion of the safety belt as low as pos
sible across the pelvis and below the round
ing of the abdomen.
- Always read and heed all WARNINGS and
other important
i nformation¢ .&. in Fasten
ing safety belts on page 264.
265
Consum er Info rmation
Technical Modifications
Our guidelines must be complied with when tech
nical modifications are made .
Always consult an authorized Audi dealer before
starting work on any modificat ions.
This will he lp ensure that vehicle function, per
formance and safety are not impaired
c> &. .
Attempting to work on e lectronic components
and the software used with them can cause mal
functions. Because of the way electronic compo
nents are interconnected with each other, such
malfunct ions can also have an adverse effect on
other systems that are not directly involved. This
means that you risk both a substantial reduction
in the operational safety of your veh icle and an
i n creased wea r of ve hicle parts
c> ,&. .
Author ized Audi dealers w ill perform this work in
a profess io nal and competent manner or, in spe
cial cases, refer you to a p rofessional company
that spec ializes in such modificat ions.
.&_ WARNING
Improper repa irs and modificat ions can
c hange the way veh icle systems work and
c ause damage to the veh icle and ser ious per
sonal injury.
(UJ) Note
I f emergency rep air s mus t be pe rformed else
where, have the vehicle ex am ined by an a u
thorized A udi dealer as soon as possib le .
Declaration of
compliance for telecom munications equipment
and electronic systems
The manufacturer is not liable fo r rad io m alfu nc
tions that are caused by unauthori zed changes to
the equipment.
Equipment
The fo llow ing equipment comp lies w it h F CC sec
tion 15 and RSS -Gen:
386
- Audi adaptive cru ise control *
- Aud i side assist*
- Remote cont rol key
- Cell phone package*
- Tire pressure monitoring system*
FCC Part 15 .19
This device complies with part 1 S of the FCC
Rules . Operation is subject to the fo llowing two
cond it ions: (1) This device may not cause harmful
i nterference, and (2) this device must accept any
i nterference rece ived, includ ing interference that
may cause undesired operat ion.
FCC Part 15 .21
Changes or modifications not express ly approved
by the party responsible for compliance could
vo id the user's authority to operate the equ ip
ment .
RSS-Gen
This device complies with Ind ustry Canada's li
cense-exempt RSSs. Operation is subject to the
follow ing two conditions:
(1) This device may not ca use interference; and
(2) This dev ice m ust accept any interference, i n
clud ing inte rfe rence that may cause undes ired
operation of the device.
CNR-Gen
Le present appare il est conforme aux CNR d'I n
dust rie Canada app licables aux appare ils radio
exemp ts de licence. L'explo itation est autor isee
a ux deux condi tions su ivantes :
1) l'appareil ne doit pas produire de b rouillage;
2) l'appareil do it accepter tout brouillage
radioe
l ectr ique subi, meme si le brouillage est suscept i
ble d'en compromettre le fonct ionnement.