Whenever a change is noticed in the sound of the
exhaust system, when exhaust fumes can be detected
inside the vehicle, or when the underside or rear of the
vehicle is damaged, have a competent mechanic inspect
the complete exhaust system and adjacent body areas
for broken, damaged, deteriorated, or mispositioned
parts. Open seams or loose connections could permit
exhaust fumes to seep into the passenger compartment.
In addition, inspect the exhaust system each time the
vehicle is raised for lubrication or oil change. Replace as
required.
Safety Checks You Should Make Inside The
Vehicle
Seat Belts
Inspect the seat belt system periodically, checking for
cuts, frays, and loose parts. Damaged parts must be
replaced immediately. Do not disassemble or modify
the system.
Front seat belt assemblies must be replaced after a
collision. Rear seat belt assemblies must be replaced
after a collision if they have been damaged (i.e., bent
retractor, torn webbing, etc.). If there is any question
regarding seat belt or retractor condition, replace the
seat belt.
Air Bag Warning Light
The Air Bag warning lightwill turn on for four to
eight seconds as a bulb check when the ignition
switch is first turned to ON/RUN. If the light is
either not on during starting, stays on, or turns on
while driving, have the system inspected at your
authorized dealer as soon as possible. After the bulb
check, this light will illuminate with a single chime
when a fault with the Air Bag System has been
detected. It will stay on until the fault is removed. If
the light comes on intermittently or remains on while
driving, have your authorized dealer service the
vehicle immediately. Refer to “Occupant Restraint
Systems” in “Safety” for further information.
Defroster
Check operation by selecting the defrost mode and
place the blower control on high speed. You should be
able to feel the air directed against the windshield. See
your authorized dealer for service if your defroster is
inoperable.
Floor Mat Safety Information
Always use floor mats designed to fit your vehicle.
Only use a floor mat that does not interfere with the
124 SAFETY
SERVICING AND MAINTENANCE
CONTENTS
SCHEDULED SERVICING ...............187
▫ Maintenance Plan ....................189
ENGINE COMPARTMENT ...............195
▫ 1750 Turbo Engine ...................195
▫ Checking Oil Level ...................196
▫ Adding Washer Solvent ................196
▫ Maintenance-Free Battery ..............199
DEALER SERVICE ....................200
▫ Engine Oil ........................ .200
▫ Engine Oil Filter .....................201
▫ Engine Air Cleaner Filter ...............201
▫ Engine Cover ...................... .202
▫ Air Conditioner Maintenance ............202
▫ Body Lubrication ....................203 ▫
Wiper Blades ...................... .204
▫ Windshield Washer Nozzles .............205
▫ Exhaust System .....................206
▫ Cooling System .....................207
▫ Brake System ...................... .212
▫ Alfa Twin Clutch Transmission ..........215
RAISING THE VEHICLE ................216
TIRES ............................. .216
▫ Tire Safety Information ................216
▫ Tires — General Information ............226
▫ Tire Types ......................... .232
▫ Spare Tires — If Equipped ..............233
▫ Wheel
And Wheel Trim Care ............236
▫ Tire Chains (Traction Devices) ...........237
8
Checking Oil Level
To assure proper engine lubrication, the engine oil must
be maintained at the correct level. Check the oil level at
regular intervals. The best time to check the engine oil
level is before starting the engine after it has sat
overnight.
Do not check oil level when the engine is warm.
Checking engine oil level when the engine is warm will
give you an incorrect reading.
Checking the oil while the vehicle is on level ground, and
has sat overnight, will improve the accuracy of the oil
level readings. Maintain the oil level between the range
markings on the dipstick. The safe range is indicated by a
crosshatch zone. Adding 1 quart of oil when the reading
is at the low end of the indicated range will result in the
oil level at the full end of the indicator range.
CAUTION!
Do not overfill the engine with oil. Overfilling the
engine with oil will cause oil aeration, which can
lead to loss of oil pressure and an increase in oil
temperature. This loss of oil pressure and increased
oil temperature could damage your engine.
Adding Washer Solvent
To check the windshield washer solvent level, proceed
as follows:
1. To avoid any interference during the procedure, liftthe windshield wiper blade.
1 — Brake Fluid Access Panel
2 — Washer Solvent Access Panel
196 SERVICING AND MAINTENANCE
NOTE:If the belts retract slowly, inspect the upper
turning loop for soiling. If soiling is present, clean with
a wet soft cloth until all residue is removed.
WARNING!
A frayed or torn belt could rip apart in a collision
and leave you with no protection. Inspect the belt
system periodically, checking for cuts, frays, or
loose parts. Damaged parts must be replaced imme-
diately. Do not disassemble or modify the system.
Seat belt assemblies must be replaced after a colli-
sion if they have been damaged (i.e., bent retractor,
torn webbing, etc.).
Plastic And Coated Parts
Use Mopar Total Clean to clean vinyl upholstery.
CAUTION!
•Direct contact of air fresheners, insect repellents,
suntan lotions, or hand sanitizers to the plastic,
painted, or decorated surfaces of the interior may
cause permanent damage. Wipe away immediately.
(Continued)
CAUTION! (Continued)
•Damage caused by these type of products may not
be covered by your New Vehicle Limited War-
ranty.
Cleaning Plastic Instrument Cluster Lenses
The lenses in front of the instruments in this vehicle are
molded in clear plastic. When cleaning the lenses, care
must be taken to avoid scratching the plastic.
1. Clean with a wet soft cloth. A mild soap solution may be used, but do not use high alcohol content or
abrasive cleaners. If soap is used, wipe clean with a
clean damp cloth.
2. Dry with a soft cloth.
Leather Parts
Mopar Total Clean is specifically recommended for
leather upholstery.
Your leather upholstery can be best preserved by regu-
lar cleaning with a damp soft cloth. Small particles of
dirt can act as an abrasive and damage the leather
upholstery and should be removed promptly with a
damp cloth. Stubborn soils can be removed easily with
8
SERVICING AND MAINTENANCE 243
Break-In Recommendations, New Vehicle.......131
Bulb Replacement ....................... .156
Bulbs, Light ........................ .126, 156
Capacities, Antifreeze (Engine Coolant) .........252
Capacities, Fluid ........................ .252
Caps, Filler Oil (Engine) ...................... .195, 201
Radiator (Coolant Pressure) ...............210
Carbon Monoxide Warning ..............123, 251
Car Washes ........................... .241
Cellular Phone ......................... .258
Chains, Tire ........................... .237
Changing A Flat Tire ..................... .216
Chart, Tire Sizing ....................... .218
Check Engine Light (Malfunction Indicator Light) . .78
Checking Your Vehicle For Safety .............123
Checks, Safety ......................... .123
Child Restraint ..........................114
Child Restraints Booster Seats .........................118
Child Restraints .......................114
Child Seat Installation ...................120
Infants And Child Restraints ..............116
Older Children And Child Restraints ........117Clean Air Gasoline
...................... .248
Cleaning Wheels ............................ .236
Windshield Wiper Blades .................204
Climate Control ..........................35
Manual ..............................35
Compact Spare Tire ...................... .233
Contract, Service ........................ .262
Coolant (Antifreeze) ...................252, 253
Coolant Pressure Cap (Radiator Cap) ..........210
Cooling System ......................... .207
Adding Coolant (Antifreeze) ..............209
Coolant Level ..................... .208, 211
Disposal Of Used Coolant ................211
Drain, Flush, And Refill ..................208
Inspection ...........................211
Points
To Remember ....................211
Pressure Cap ........................ .210
Radiator Cap ........................ .210
Selection Of Coolant (Antifreeze) ...........208
Corrosion Protection ..................... .240
Cruise Light .............................76
Cupholders .............................50
Customer Assistance ..................... .260
12
INDEX 267
Daytime Running Lights....................31
Dealer Service .......................... .200
Deck Lid, Release .........................43
Defroster, Windshield .....................124
Delay (Intermittent) Wipers ..................34
Diagnostic System, Onboard .................77
Dimmer Control ..........................33
Disabled Vehicle Towing ...................181
Disposal Antifreeze (Engine Coolant) ...............211
Door Locks Child-Protection Door Lock — Rear Doors .....23
Driver’s Seat Back Tilt ......................24
Driving Through Flowing, Rising, Or Shallow Standing
Water .............................. .153
Electrical Outlet, Auxiliary (Power Outlet) .......50
Electrical Power Outlets ....................50
Electric Remote Mirrors .....................29
Electronic Brake Control System ...............83
Electronic Speed Control (Cruise Control) .......143
Electronic Throttle Control Warning Light ........70
Emergency, In Case Of Hazard Warning Flasher .................156 Jacking
............................ .216
Jump Starting ........................ .176
Overheating ......................... .180
Towing ............................ .181
Emission Control System Maintenance ..........78
Engine ............................... .195
Air Cleaner ......................... .201
Break-In Recommendations ...............131
Checking Oil Level .....................196
Compartment ........................ .195
Cooling ............................ .207
Exhaust Gas Caution ................123, 251
Fails To Start ........................ .130
Flooded, Starting ..................... .130
Fuel Requirements .....................248
Jump Starting ........................ .176
Oil ............................ .200, 252
Oil Filler Cap ..................... .195, 201
Oil Filter ........................... .201
Oil
Selection ......................... .200
Overheating ......................... .180
Starting ............................ .129
Enhanced Accident Response Feature ..........184
Ethanol .............................. .249
268 INDEX
Service............................. .156
Tire Pressure Monitoring (TPMS) .........72, 88
Turn Signal ....................... .76, 126
Warning (Instrument Cluster Description) . . .72, 76
Loading Vehicle Tires .............................. .222
Locks Power Door ...........................22
Low Tire Pressure System ...................88
Lubrication, Body ....................... .203
Lug Nuts ............................. .246
Maintenance Free Battery ...................199
Maintenance, General .....................200
Maintenance Procedures ...................200
Maintenance Schedule .....................187
Malfunction Indicator Light (Check Engine) . . . .75, 78
Manual, Service ........................ .264
Manual Transmission Lubricant Selection .....................254
Master Cylinder (Brakes) ...................212
Memory Feature (Memory Seat) ...............24
Memory Seat ............................24
Memory Seats And Radio ...................24
Methanol ............................. .249Mirrors
................................27
Electric Remote ........................29
Heated ..............................29
Outside .......................... .28, 29
Rearview .............................27
Modifications/Alterations, Vehicle ..............6
Monitor, Tire Pressure System ................88
Mopar Parts ........................... .263
MTBE/ETBE .......................... .249
Multi-Function Control Lever ................30
New Vehicle Break-In Period ................131
Occupant Restraints .......................92
Octane Rating, Gasoline (Fuel) ...............248
Oil, Engine ..................... .200, 252, 253
Capacity ........................... .252
Change Interval ...................... .200
Checking ........................... .196
Disposal ............................ .201
Filter .............................. .201
Filter
Disposal ....................... .201
Materials Added To ....................201
Pressure Warning Light ...................70
Recommendation ...................200, 25212
INDEX 271