2017 VOLVO XC90 TWIN ENGINE HYBRID phone

||
INFOTAINMENT
458

Toggling between Apple CarPlay and
iPod
Apple CarPlay to iPod
1.Tap Settings in the center display's Topview.
2.Tap CommunicationApple CarPlay.
3. Deselect the Apple device's box that will nolonger start Apple CarPlay when it is con-nected.
4. Disconnect and reconnect the Apple deviceto the USB socket.
5.Open the iPod app from App view.

iPod to Apple CarPlay
1.Tap Apple CarPlay in the center display'sApp view.
2.Read the conditions in the pop-up windowthat appears and tap OK.
3.Disconnect and reconnect the Apple deviceto the USB socket.
> The Apple CarPlay sub-view will open.

Related information
•Media player (p. 455)
•Playing media (p. 459)
•Connecting a device via the AUX/USBsocket (p. 455)
•Apple CarPlay settings (p. 458)
Apple CarPlay settings
This article explains settings for a cell phoneconnected through Apple CarPlay.
Automatic start
1.Tap Settings in the center display's Topview.
2.Tap CommunicationApple CarPlay andselect the following settings:
•Select the Apple CarPlay box for auto-matic start when the device's USB cableis connected.
•Deselect the Apple CarPlay box to disa-ble automatic start when the device'sUSB cable is connected.
A maximum of 20 Apple devices can be stored inthe list. When the list is full, the first (oldest)device stored will be deleted.
To erase the entire list, a factory reset has to beperformed. See the article "Resetting the set-tings view."

System volume levels
1.Tap Settings in the center display's Topview.
2.Tap SoundSystem Volumes and selectthe following settings:
•Voice Control
•Navigation
•Ringtone
Related information
•Apple CarPlay (p. 456)
•Resetting the settings view (p. 119)

INFOTAINMENT
466
Internet connected vehicle
Connecting to the Internet makes it possible toe.g., use certain navigation services, listen toweb radio, stream music using apps, contact aretailer and download software.
The vehicle can connect to the Internet usingBluetooth, Wi-Fi, a cell phone connected by acable to the USB socket or via the integratedmodem.
When connected, it is possible to share (tether) aWi-Fi-hotspot to allow other devices to use the
connection6.
Connection status is shown in the center dis-play's status bar.

Related information
•Connecting to the Internet (p. 466)
•Apps (applications) (p. 432)
•Booking service and repairs (p. 508)
•System updates (p. 506)
•Volvo ID (p. 32)
•Symbols in the center display status bar(p. 48)
•Tethering (Wi-Fi sharing) (p. 470)
Connecting to the Internet
Connect the vehicle to the Internet usingBluetooth, Wi-Fi, by connecting a phone througha cable to the USB socket or via the vehicle'sintegrated modem.
The cell phone and the network service providermust support Internet sharing (tethering) and thesubscription must included data transfer.
See the terms and confidentiality information atsupport.volvocars.com before connecting to theInternet.

NOTE
When using Apple CarPlay, an Internet con-nection can only be established by usingWi-Fi or the vehicle's integrated modem.

Connect using Bluetooth
See the article "Pairing a cell phone."

Connect using Wi-Fi
6This does not apply to Wi-Fi connections.

INFOTAINMENT
467
1. Activate tethering/personal hotspot in thecell phone.
2.Tap Settings in the center display's Topview.
3.Tap CommunicationWi-Fi.
4. Tap Wi-Fi to activate/deactivate.
5. Tap the name of the network to be used.
6. Enter the network password.
7. If a different connection was used previously,confirm the connection change.
> The vehicle will connect to the network.
Please be aware that certain cell phones disabletethering when the connection to the vehicle hasbeen broken, e.g., when the phone has beenremoved from the vehicle. In such cases, thephone's tethering function will have to be reacti-vated the next time the phone is used to connectto the Internet.
When a phone is connected to the vehicle, it issaved for future use. When a max. number of 50have been saved, the first one connected will bedeleted. To show the list of saved networks or to
manually delete a network, tap SettingsWi-Fi
Saved networks.
See the article "Wi-Fi technology and security"for network connection requirements.

Connect using a cable connected to the
USB socket
1. Connect the phone via a cable to the USBsocket in the tunnel console storage com-partment.
2. Activate USB tethering in the cell phone.
3. If a different connection was used previously,confirm the connection change.
> The vehicle will connect to the network.

Connect using the vehicle's integrated
modem
When the vehicle is connected using the modem,Volvo On Call services will use the connection.
1. Insert a personal SIM card in the holder.
2.Tap Settings in the center display's Topview.
3.Tap CommunicationVehicle ModemInternet.
4.Tap Vehicle modem Internet to activate/deactivate.
5.If a different connection was used previously,confirm the connection change.
6. Enter the SIM card's PIN code.
> The vehicle will connect to the network.
Related information
•Pairing a cell phone (p. 449)
•Connecting/disconnecting a cell phone(p. 451)
•Connecting a device via the AUX/USBsocket (p. 455)
•Wi-Fi technology and security (p. 471)
•Apple CarPlay (p. 456)

INFOTAINMENT
468
Bluetooth settings
The following settings apply to a Bluetooth-con-nected cell phone or other device.

Bluetooth
1.Tap Settings in the center display's Topview.
2.Tap CommunicationBluetooth andselect among the following settings:
•Previously paired devices: lists thedevices that are paired and connected tothe vehicle.
•Internet connection: select to connectto the Internet using the device'sBluetooth connection.
•Add device: begin the procedure to paira new device.
•Remove device: remove a paired device.
•Allowed services for this device: selectwhat the device will be used for: makecalls, send/receive messages, streammedia, Internet connection.

Bluetooth compliance
United States
FCC CAUTION
Changes or modifications not expressly approvedby the party responsible for compliance couldvoid the user's authority to operate the equip-ment. This transmitter must not be co-located or
operated in conjunction with any other antennaor transmitter.
Canada
This device complies with Industry Canadalicence-exempt RSS standard(s). Operation issubject to the following two conditions:
(1) this device may not cause interference, and
(2) this device must accept any interference,including interference that may cause undesiredoperation of the device.
Related information
•Internet connected vehicle (p. 466)
•Pairing a cell phone (p. 449)
•Phone (p. 448)
•Media player (p. 455)
•Connecting/disconnecting a cell phone(p. 451)
Downloading, updating anduninstalling apps
When the vehicle is connected to the Internet,apps can be added (downloaded), kept up-to-date or deleted.
NOTE
Downloading data may affect other servicesthat transfer data such as web radio, stream-ing music, etc. If this occurs, a download inprogress can be cancelled or the other serv-ice can be temporarily turned off.
Apps are managed via theDownload Center in the cen-ter display's App view.
To download, update or deleteapps, the vehicle must be con-nected to the Internet.

Downloading an app
1.Open the Download Center app.
2.Select New apps to open a list of apps thatare available but which are not installed inthe vehicle. Tap anywhere in a line for an appto expand the list for additional information.

INFOTAINMENT
}}
469
3.Select Install to start downloading the app. Itwill remain in the list and a new downloadcan be initiated if necessary.
>Download status will be indicated while itis in progress.
A message will be displayed if a downloadcannot be started immediately. The appwill remain in the list and a new downloadcan be initiated if necessary.

Cancelling (aborting) a download
–Tap Abort to cancel a download that is cur-rently underway.
Only a download can be cancelled. If the installa-tion phase has begun, it cannot be interrupted.

Updating apps
If an app is being used while an update is in pro-gress, it will be restarted to complete the update.

Update (install) all
1.Open the Download Center app.
2.Select Install all.
>The update will begin.

Updating certain apps
1.Open the Download Center app.
2.Select Application updates to open a listof available updates.
3.Find the desired app and select Install.
>The update will begin.
Uninstalling an app
An app being used must be closed before it canbe uninstalled.
1.Open the Download Center app.
2.Select Application updates to open a listof apps that have been installed.
3.Find the desired app and select Uninstall tobegin uninstalling the app.
>When the app has been uninstalled, it willbe removed from the list.

Related information
•Internet connected vehicle (p. 466)
•Media player (p. 455)
•System updates (p. 506)
Internet connection troubleshooting
The following are factors that may affect thevehicle's Internet connection.
The amount of data being transmitted dependson the services or apps that are currently in use.For example, streaming audio requires a greatdeal of data to be transmitted, which requires agood connection and a strong signal.
Cell phone to the vehicle
Connection speed may vary depending on thelocation of the cell phone in the vehicle. Move thephone closer to the center display to increasesignal strength. Be sure that there are noobstructing/screening objects between thephone and the screen.

Cell phone to the network operator
The speed of the mobile network may varydepending on coverage/reception in the vehicle'slocation. Reception is generally poorer in tunnels,in mountainous areas, in deep valleys or indoors.Connection speed may also depend on the typeof subscription that you have with the serviceprovider.
Contact your service provider in the event of datatransmission problems.

Restarting the phone
If you experience problems making a connection,it may to help to restart the phone.

||
INFOTAINMENT
474
1993), The Regents of the University ofCalifornia. All or some portions are derived frommaterial licensed to the University of California byAmerican Telephone and Telegraph Co. or UnixSystem Laboratories, Inc. and are reproducedherein with the permission of UNIX SystemLaboratories, Inc. Redistribution and use insource and binary forms, with or withoutmodification, are permitted provided that thefollowing conditions are met: Redistributions ofsource code must retain the above copyrightnotice, this list of conditions and the followingdisclaimer. Redistributions in binary form mustreproduce the above copyright notice, this list ofconditions and the following disclaimer in thedocumentation and/or other materials providedwith the distribution. Neither the name of the nor the names of itscontributors may be used to endorse or promoteproducts derived from this software withoutspecific prior written permission. THISSOFTWARE IS PROVIDED BY THE COPYRIGHTHOLDERS AND CONTRIBUTORS "AS IS" ANDANY EXPRESS OR IMPLIED WARRANTIES,INCLUDING, BUT NOT LIMITED TO, THEIMPLIED WARRANTIES OF MERCHANTABILITYAND FITNESS FOR A PARTICULAR PURPOSEARE DISCLAIMED. IN NO EVENT SHALL THECOPYRIGHT OWNER OR CONTRIBUTORS BELIABLE FOR ANY DIRECT, INDIRECT,INCIDENTAL, SPECIAL, EXEMPLARY, ORCONSEQUENTIAL DAMAGES (INCLUDING,BUT NOT LIMITED TO, PROCUREMENT OF
SUBSTITUTE GOODS OR SERVICES; LOSS OFUSE, DATA, OR PROFITS; OR BUSINESSINTERRUPTION) HOWEVER CAUSED AND ONANY THEORY OF LIABILITY, WHETHER INCONTRACT, STRICT LIABILITY, OR TORT(INCLUDING NEGLIGENCE OR OTHERWISE)ARISING IN ANY WAY OUT OF THE USE OFTHIS SOFTWARE, EVEN IF ADVISED OF THEPOSSIBILITY OF SUCH DAMAGE.
This software is based in part on the work of theIndependent JPEG Group.
This software uses parts of sources from"libtess". The Original Code is: OpenGL SampleImplementation, Version 1.2.1, released January26, 2000, developed by Silicon Graphics, Inc. TheOriginal Code is Copyright (c) 1991-2000 SiliconGraphics, Inc. Copyright in any portions createdby third parties is as indicated elsewhere herein.All Rights Reserved. Copyright (C) [1991-2000]Silicon Graphics, Inc. All Rights Reserved.Permission is hereby granted, free of charge, toany person obtaining a copy of this software andassociated documentation files (the "Software"),to deal in the Software without restriction,including without limitation the rights to use,copy, modify, merge, publish, distribute,sublicense, and/or sell copies of the Software,and to permit persons to whom the Software isfurnished to do so, subject to the followingconditions: The above copyright notice includingthe dates of first publication and either thispermission notice or a reference to http://
oss.sgi.com/projects/FreeB/ shall be included inall copies or substantial portions of the Software.THE SOFTWARE IS PROVIDED "AS IS",WITHOUT WARRANTY OF ANY KIND,EXPRESS OR IMPLIED, INCLUDING BUT NOTLIMITED TO THE WARRANTIES OFMERCHANTABILITY, FITNESS FOR APARTICULAR PURPOSE ANDNONINFRINGEMENT. IN NO EVENT SHALLSILICON GRAPHICS, INC. BE LIABLE FOR ANYCLAIM, DAMAGES OR OTHER LIABILITY,WHETHER IN AN ACTION OF CONTRACT,TORT OR OTHERWISE, ARISING FROM, OUTOF OR IN CONNECTION WITH THE SOFTWAREOR THE USE OR OTHER DEALINGS IN THESOFTWARE. Except as contained in this notice,the name of Silicon Graphics, Inc. shall not beused in advertising or otherwise to promote thesale, use or other dealings in this Softwarewithout prior written authorization from SiliconGraphics, Inc.
This software is based in parts on the work of theFreeType Team.
This software uses parts of SSLeay Library:Copyright (C) 1995-1998 Eric Young([email protected]). All rights reserved

Linux software
This product contains software licensed underGNU General Public License (GPL) or GNULesser General Public License (LGPL), etc.

INFOTAINMENT
}}
475
You have the right of acquisition, modification,and distribution of the source code of the GPL/LGPL software.
You may download Source Code from thefollowing website at no charge: http://www.embedded-carmultimedia.jp/linux/oss/download/TVM_8351_013
The website provides the Source Code "As Is"and without warranty of any kind.
By downloading Source Code, you expresslyassume all risk and liability associated withdownloading and using the Source Code andcomplying with the user agreements thataccompany each Source Code.
Please note that we cannot respond to anyinquiries regarding the source code.

camellia:1.2.0
Copyright (c) 2006, 2007
NTT (Nippon Telegraph and TelephoneCorporation). All rights reserved.
Redistribution and use in source and binaryforms, with or without modification, are permittedprovided that the following conditions are met:
1. Redistributions of source code must retainthe above copyright notice, this list ofconditions and the following disclaimer asthe first lines of this file unmodified.
2. Redistributions in binary form mustreproduce the above copyright notice, this list
of conditions and the following disclaimer inthe documentation and/or other materialsprovided with the distribution.
THIS SOFTWARE IS PROVIDED BY NTT ``ASIS'' AND ANY EXPRESS OR IMPLIEDWARRANTIES, INCLUDING, BUT NOT LIMITEDTO, THE IMPLIED WARRANTIES OFMERCHANTABILITY AND FITNESS FOR APARTICULAR PURPOSE ARE DISCLAIMED. INNO EVENT SHALL NTT BE LIABLE FOR ANYDIRECT, INDIRECT, INCIDENTAL, SPECIAL,EXEMPLARY, OR CONSEQUENTIAL DAMAGES(INCLUDING, BUT NOT LIMITED TO,PROCUREMENT OF SUBSTITUTE GOODS ORSERVICES; LOSS OF USE, DATA, OR PROFITS;OR BUSINESS INTERRUPTION) HOWEVERCAUSED AND ON ANY THEORY OF LIABILITY,WHETHER IN CONTRACT, STRICT LIABILITY,OR TORT (INCLUDING NEGLIGENCE OROTHERWISE) ARISING IN ANY WAY OUT OFTHE USE OF THIS SOFTWARE, EVEN IFADVISED OF THE POSSIBILITY OF SUCHDAMAGE.

Unicode: 5.1.0
COPYRIGHT AND PERMISSION NOTICE
Copyright c 1991-2013 Unicode, Inc. All rightsreserved. Distributed under the Terms of Use inhttp://www.unicode.org/copyright.html.
Permission is hereby granted, free of charge, toany person obtaining a copy of the Unicode datafiles and any associated documentation (the
"Data Files") or Unicode software and anyassociated documentation (the "Software") todeal in the Data Files or Software withoutrestriction, including without limitation the rightsto use, copy, modify, merge, publish, distribute,and/or sell copies of the Data Files or Software,and to permit persons to whom the Data Files orSoftware are furnished to do so, provided that (a)the above copyright notice(s) and this permissionnotice appear with all copies of the Data Files orSoftware, (b) both the above copyright notice(s)and this permission notice appear in associateddocumentation, and (c) there is clear notice ineach modified Data File or in the Software aswell as in the documentation associated with theData File(s) or Software that the data or softwarehas been modified.
THE DATA FILES AND SOFTWARE AREPROVIDED "AS IS", WITHOUT WARRANTY OFANY KIND, EXPRESS OR IMPLIED, INCLUDINGBUT NOT LIMITED TO THE WARRANTIES OFMERCHANTABILITY, FITNESS FOR APARTICULAR PURPOSE ANDNONINFRINGEMENT OF THIRD PARTYRIGHTS. IN NO EVENT SHALL THECOPYRIGHT HOLDER OR HOLDERSINCLUDED IN THIS NOTICE BE LIABLE FORANY CLAIM, OR ANY SPECIAL INDIRECT ORCONSEQUENTIAL DAMAGES, OR ANYDAMAGES WHATSOEVER RESULTING FROMLOSS OF USE, DATA OR PROFITS, WHETHERIN AN ACTION OF CONTRACT, NEGLIGENCE

MAINTENANCE AND SERVICING
508
Booking service and repairs
Connected Service Booking (CSB) makes itpossible to use the vehicle's Internet connectionto set up a time for service, maintenance and/orrepairs.
The information is handled through the Carstatus app, which can be opened from the cen-ter display's App view.
Information about your vehicle is sent to yourretailer and you can book your workshop appoint-ment directly in your retailer's workshop planningsystem using the Volvo On-Line Service Schedu-ler with your smart phone. The system will alsosend a reminder as the appointment approachesand the Sensus Navigation system will providedirections to the workshop if necessary.
This feature makes it convenient to book a work-shop appointment directly from your vehicle.Vehicle-related information is sent to yourretailer, who prepares your visit to the workshop.After you have requested a workshop appoint-ment, your retailer will send you an email includ-ing a link enabling you to connect directly to yourretailer's booking system, where you can bookthe appointment at a convenient time. Informationabout your retailer is also available in the vehicleso that you can contact the retailer/workshop atany time using the Call my retailer menu option.

NOTE
My Volvo can be found by going to www.vol-vocars.com and selecting the United States orCanada.

Before the service can be used
Volvo ID
•The owner (primary driver) must create orhave a Volvo ID (see the article "Volvo ID").
•You must enter your Volvo ID (your emailaddress) in the vehicle as explained in thearticle "Volvo ID". If you have already regis-tered a Volvo ID, use the same email addressthat you used to create the Volvo ID.

Changing a Volvo ID email address
If you would like to register a different emailaddress, open the Volvo ID app in the center dis-play's App view and tap Change Volvo ID. Fol-low the instructions provided. See also the article"Volvo ID" for additional information.

Selecting a Volvo retailer on the My Volvo
website
By default, the retailer where you purchased yourvehicle will be your preferred retailer/Volvoauthorized workshop who will perform serviceand repairs on your vehicle. To change the pre-ferred retailer, go to your personalized My Volvowebsite.
Prerequisites for booking service from the
vehicle
In order to request an appointment from the vehi-cle:
•The engine must be running
•The vehicle must be connected to the Inter-net (see the article "Internet connected vehi-cle")

Using the service
When it is time for service or in certain cases ifrepairs are necessary, a message will appear inthe instrument panel and in the center display.This message is triggered by:
•the amount of time that has elapsed sincethe last service
•the number of hours the engine has runsince the last service
•mileage since the last service.
•Specific alerts or fault codes in the vehicle

Booking service or repairs
Submit a booking request whenever you need aworkshop appointment or when a messageregarding the need for service or repairs hasbeen displayed in the instrument panel and in thecenter display. This can be done directly from thevehicle as follows or alternatively by using the MyVolvo personal website booking tab.