||
LOCKS AND ALARM
258
2. Press the button on the driver's door controlpanel.
>Rear child lock Activated will be dis-played in the instrument panel and theindicator light in the button will illuminateto show that the child safety locking func-tion is activated.
While the child safety locks are activated:
•the rear door windows can only be openedfrom the driver door control panel
•the rear doors cannot be opened from theinside
To deactivate:
–Press the button in the driver door controlpanel.
>Rear child lock Deactivated will be dis-played in the instrument panel and theindicator light in the button will go out toshow that the child safety locking functionis deactivated.
When the ignition is switched off, the current set-ting for the child safety locks will be stored. If thelocks were activated at that time, they will con-tinue to be activated when the ignition isswitched on again.
SymbolMessageExplanation
Rear childlockActivatedThe rear-doorchild safetylocks are acti-vated.
Rear childlockDeacti-vated
The rear-doorchild safetylocks are deacti-vated.
Manual activation/deactivation
Manual child safety locks in the rear doors
–Use the detachable key blade in the remotekey to adjust these controls.
The rear doors can only be opened from theoutside.
The rear doors can be opened from theinside or the outside.
NOTE
•Each control on the respective doorscontrol that door only, not both doors.
•There are no manual child safety locks onmodels equipped with the electronicoption.
Related information
•Detachable key blade (p. 242)
•Ignition modes (p. 400)
LOCKS AND ALARM
* Option/accessory, for more information, see Introduction.259
Start and lock system typedesignations
The following information contains type designa-tions for the start and lock system.
Alarm system
USA FCC ID: MAYDA 5823(3)
This device complies with part 15 of the FCCrules. Operation is subject to the following condi-tions: (1) This device may not cause harmfulinterference, and (2) this device must accept anyinterference received, including interference thatmay cause undesired operation.
Canada IC: 4405A-DA 5823(3)
This device is subject to the following conditions:(1) this device may not cause interference, and(2) this device must accept any interference,including interference that may cause undesiredoperation of the device.
Remote keys (Passive entry/Passive
start * )
USA
Volvo Standard Key FCC ID: YGOHUF8423
Volvo Tag ID FCC ID: YGOHUF8432
This device complies with Part 15 of the FCCRules. Operation is subject to the following twoconditions:
(1) This device may not cause harmful interfer-ence, and
(2) this device must accept any interferencereceived, including interference that may causeundesired operation.
Any changes or modification not expresslyapproved by the party responsible for compliancecould void the user
DRIVER SUPPORT
* Option/accessory, for more information, see Introduction.263
Electronic Stability Control (ESC)
Electronic Stability Control (ESC) helps reducewheel spin, counteract skidding and to generallyhelp improve directional stability.
A pulsating sound will be audi-ble when the system is activelyoperating and is normal. Accel-eration may also be slightlyslower than normal.
WARNING
ESC is a supplementary aid and cannot dealwith all situations or road conditions.
The driver is always responsible for operatingthe vehicle in a safe manner in accordancewith current traffic regulations.
ESC consists of the following functions:
•Traction control
•Spin control
•Active Yaw Control
•Engine Drag Control
•Trailer Stability Assist
Traction control
This function is designed to help reduce wheelspin by transferring power from a drive wheel that
begins to lose traction to the wheel on the oppo-site side of the vehicle (on the same axle).
Spin control
This function is designed to help prevent thedrive wheels from spinning while the vehicle isaccelerating.
Active Yaw Control
At low speeds, this function helps maintain direc-tional stability by braking one or more of thewheels if the vehicle shows a tendency to skid orslide laterally.
Engine Drag Control EDC
EDC helps keep the engine running if the wheelsshow a tendency to lock, e.g., when shifting downin the manual shifting mode or while using theengine's braking function on a slippery surface. Ifthe wheels were to lock, the vehicle wouldbecome more difficult to steer.
Trailer Stability Assist * 1
TSA helps stabilize a vehicle that is towing atrailer when the vehicle and trailer have begun tosway.
This system is automatically deactivated if thedriver selects Sport mode.
Related information
•Detachable trailer hitch (p. 398)
•Driving with a trailer (p. 397)
•Trailer Stability Assist (TSA) (p. 399)
•Electronic Stability Control (ESC) sport mode(p. 264)
•Electronic Stability Control (ESC) symbolsand messages (p. 265)
1
This function is included if the vehicle is equipped with a Volvo original trailer hitch.
DRIVER SUPPORT
264
Electronic Stability Control (ESC)sport mode
ESC is always activated and cannot be switchedoff.
However, the driver can select Sport mode,which offers more active driving characteristics.
In Sport mode, the engine management systemmonitors movement of the accelerator pedal andsteering wheel for sportier driving and allowsmore lateral movement of the rear wheels beforeESC is triggered.
Under certain circumstances, such as when driv-ing with snow chains, or driving in deep snow orloose sand, it may be advisable to temporarily useSport mode for maximum tractive force.
If the driver releases pressure on the acceleratorpedal, ETC will also activate to help stabilize thevehicle.
Activating/deactivating Sport mode
In the center display's Functionview, tap ESC Sport Mode.The green indicator light in thebutton will illuminate to showthat the function has been acti-vated or gray when the functionis deactivated.
When Sport mode is activated, thissymbol will illuminate in the instrumentpanel. It will remain on until the driverdeactivates the function. ETC will alsoreturn to normal mode when the engine is restar-ted.
Related information
•Electronic Stability Control (ESC) (p. 263)
||
DRIVER SUPPORT
266
SymbolMessageDescription
ESC Temporarily offThe ESC system function has been temporarily reduced due to high brake disc temperature. The function reac-tivates automatically when the brakes have cooled.
ESC Service requiredThe ESC system is not functioning properly.
•Stop the vehicle in a safe place, turn off the engine and restart it.
•If the message is still displayed when the engine has restarted, drive to an authorized Volvo workshop tohave the system inspected.
WARNING
The stability system is intended to helpimprove driving safety. It supplements, but cannever replace, the driver's judgment andresponsibility when operating the vehicle.Speed and driving style should always beadapted to traffic and road conditions.
Related information
•Electronic Stability Control (ESC) (p. 263)
DRIVER SUPPORT
* Option/accessory, for more information, see Introduction.274
Cruise Control (CC)
Cruise Control (CC) is designed to assist thedriver by maintaining a set speed. It is primarilyintended for use on long straight roads in steadytraffic, such as on highways and other mainroads in smoothly flowing traffic.
Overview
Function buttons and symbols (generic illustration)
Increases the set speed or CC switchesfrom standby mode to active mode
The set speed will be resumed
Press to put CC in active mode and setthe current speed or from active mode, pressto put CC in standby mode
— Decreases the set speed
Set speed indicator
The vehicle's current speed
The set speed
In models equipped with the optional AdaptiveCruise Control (ACC), the driver can togglebetween CC and ACC – see the article "Switch-ing between Cruise Control and Adaptive CruiseControl".
WARNING
•The vehicle must always be drivenaccording to current traffic/road condi-tions. The driver must take action if CCdoes not maintain a suitable speedand/or distance to other vehicles.
•The driver is always responsible for oper-ating the vehicle in a safe manner.
Related information
•Starting and activating Cruise Control(p. 274)
•Changing Cruise Control speed (p. 275)
•Deactivating/resuming Cruise Control (CC)(p. 276)
•Turning Cruise Control off (p. 277)
•Adaptive Cruise Control (ACC)* (p. 281)
•Switching between Cruise Control andAdaptive Cruise Control* (p. 278)
Starting and activating CruiseControl
Cruise Control (CC) must be selected and acti-vated before it can regulate the vehicle's speed.
Selecting CC (putting it in standby
mode)
Function buttons and symbols
–Press ◀ (1) or ▶ (3) to scroll to the CC
() function.
>The symbol (4) will be displayed in theinstrument panel. This indicates that CChas been selected and can then be acti-vated to maintain a set speed.
DRIVER SUPPORT
}}
* Option/accessory, for more information, see Introduction.279
Distance Alert*
Distance Alert is a function that alerts the driverif the time interval to the vehicle ahead is tooshort.
Distance Alert is active at speeds above approxi-mately 20 mph (30 km/h) and only reacts to avehicle ahead that is driving in the same direc-tion. No information is provided for vehicles driv-ing toward you, moving very slowly, or at a stand-still.
Warning light (generic illustration)
A warning light in the windshield glows steadily ifyour vehicle is closer to the one ahead than theset time interval.
NOTE
Strong sunlight, reflections, extreme light con-trasts, the use of sunglasses, or if the driver isnot looking straight ahead may make the vis-ual warning signal in the windshield difficult tosee.
NOTE
Distance Alert only monitors distance to thevehicle ahead while Adaptive Cruise Control isin standby mode or off.
WARNING
Distance Alert only indicates the distance tothe vehicle ahead. It does not affect thespeed of your vehicle.
Head-up-display *
Distance Alert symbol in the windshield (generic illustra-tion)
In vehicle is equipped with the head-up display*,the symbol in the windshield will only appear ifthe distance to the vehicle ahead is shorter thanthe preset value. However, the Show DriverSupport In Head-Up Display function has tobe activated in the Settings menu. See the article"Head-up display" for additional information.
NOTE
Strong sunlight, reflections, extreme light con-trasts, the use of sunglasses, or if the driver isnot looking straight ahead may make the vis-ual warning signal in the windshield difficult tosee.
DRIVER SUPPORT
}}
* Option/accessory, for more information, see Introduction.281
Distance Alert* limitations
Distance Alert uses the same radar sensor asAdaptive Cruise Control* and has several limita-tions.
WARNING
•The radar sensor has a limited field ofvision. In some situations it may detect avehicle later than expected or not detectother vehicles at all.
•The radar sensor cannot cover all drivingsituations and traffic, weather and roadconditions.
•The driver is responsible for maintaining asafe distance and speed and must inter-vene if the various driver support systemsdo not maintain a suitable speed or suita-ble distance to the vehicle ahead.
•Maintenance of radar sensor componentsmay only be performed by a trained andqualified Volvo technician.
•Strong sunlight, reflections from the roadsurface, strong lighting contrasts or usingsunglasses may make the warning light inthe windshield difficult to see.
WARNING
•Poor weather or winding roads can affectthe radar sensor's capacity to detect vehi-cles ahead.
•A vehicle's size (e.g., a motorcycle) canalso affect the radar sensor's capacity todetect another vehicle. This may result inthe warning light illuminating at a shorterdistance than the one that has been setor not illuminating at all.
•High speeds may also result in the warn-ing light illuminating at a shorter distancethan the one that has been set due tolimitations in the radar sensor's range.
For additional information, see also the article"Radar sensor limitations."
Related information
•Radar sensor limitations (p. 319)
•Distance Alert* (p. 279)
Adaptive Cruise Control (ACC)*
ACC is an optional system designed to assistthe driver by maintaining a set speed or a settime interval to the vehicle ahead.
ACC helps provide more relaxed driving on longtrips on highways or other major roads in a rela-tively even flow of traffic.
The camera and radar sensor monitor the distance tothe vehicle ahead (generic illustration - certain detailsmay vary from model to model)
The driver sets that desired speed and time inter-val to the vehicle ahead. When the camera andradar sensor detects a slower moving vehicleahead, your vehicle's speed is automaticallyadapted. When there are no longer slower mov-ing vehicles ahead, your vehicle will accelerate toresume the set speed.
ACC is designed to follow a vehicle ahead in thesame lane and maintain a time interval to that