2017 VOLVO XC90 TWIN ENGINE HYBRID ECU

||
INSTRUMENTS AND CONTROLS
134

Related information
•Instrument panel App menu (p. 160)
•Warning symbols in the instrument panel(p. 141)
•Indicator symbols in the instrument panel(p. 130)
•Instrument panel licenses (p. 136)
Hybrid-related information in theinstrument panel
Different types of information will be displayed inthe instrument panel, depending on the drivemode selected. These drive modes offer uniqueways of helping the driver achieve the best pos-sible driving economy.
The vehicle also stores driving statistics that canbe viewed in the form of a bar graph.

Hybrid-unique symbols
The various gauges and indicators in the instru-ment panel show the relationship between theelectric motor's current power consumption andthe remaining power available.
Indicates the currently available outputfrom the electric motor. A solid symbolindicates that the electric motor isbeing used.
Indicates the currently available outputfrom the electric motor. A hollow sym-bol means that the electric motor isnot being used.
Indicates the output level when thegasoline engine starts. A solid symbolindicates that the gasoline engine isbeing used.
Indicates the output level when thegasoline engine will start. A hollowsymbol indicates that the gasolineengine is not being used.
Indicates that the hybrid battery isbeing charged.
Indicates the current charge level inthe electric motor's battery. This indica-tor is located by the hybrid batterygauge in the lower right corner.
eDTE (Electrical Distance To Empty)indicator (distance until the hybrid bat-tery is discharged).

The hybrid gauge
Available electric motor output
This hybrid battery indicator is located betweenthe hybrid gauge and the fuel gauge on the lowerright side of the instrument panel. It indicates thecurrent (charge level) remaining in the hybrid bat-tery, which can be used to power the electricmotor or to heat/cool the vehicle.

INSTRUMENTS AND CONTROLS
}}
137

BSD 2-clause “Simplified” license
Copyright ©) , All rightsreserved.
Redistribution and use in source and binaryforms, with or without modification, are permittedprovided that the following conditions are met:
1. Redistributions of source code must retainthe above copyright notice, this list ofconditions and the following disclaimer.
2. Redistributions in binary form mustreproduce the above copyright notice, this listof conditions and the following disclaimer inthe documentation and/or other materialsprovided with the distribution.
THIS SOFTWARE IS PROVIDED BY THECOPYRIGHT HOLDERS AND CONTRIBUTORS"AS IS" AND ANY EXPRESS OR IMPLIEDWARRANTIES, INCLUDING, BUT NOT LIMITEDTO, THE IMPLIED WARRANTIES OFMERCHANTABILITY AND FITNESS FOR APARTICULAR PURPOSE ARE DISCLAIMED. INNO EVENT SHALL THE COPYRIGHT OWNEROR CONTRIBUTORS BE LIABLE FOR ANYDIRECT, INDIRECT, INCIDENTAL, SPECIAL,EXEMPLARY, OR CONSEQUENTIAL DAMAGES(INCLUDING, BUT NOT LIMITED TO,PROCUREMENT OF SUBSTITUTE GOODS ORSERVICES; LOSS OF USE, DATA, OR PROFITS;OR BUSINESS INTERRUPTION) HOWEVERCAUSED AND ON ANY THEORY OF LIABILITY,WHETHER IN CONTRACT, STRICT LIABILITY,
OR TORT (INCLUDING NEGLIGENCE OROTHERWISE) ARISING IN ANY WAY OUT OFTHE USE OF THIS SOFTWARE, EVEN IFADVISED OF THE POSSIBILITY OF SUCHDAMAGE.
The views and conclusions contained in thesoftware and documentation are those of theauthors and should not be interpreted asrepresenting official policies, either expressed orimplied, of the FreeBSD Project.

FreeType Project License
1. 1 Copyright 1996-1999 by David Turner,Robert Wilhelm, and Werner LembergIntroduction The FreeType Project isdistributed in several archive packages; someof them may contain, in addition to theFreeType font engine, various tools andcontributions which rely on, or relate to, theFreeType Project. This license applies to allfiles found in such packages, and which donot fall under their own explicit license. Thelicense affects thus the FreeType fontengine, the test programs, documentationand makefiles, at the very least. This licensewas inspired by the BSD, Artistic, and IJG(Independent JPEG Group) licenses, whichall encourage inclusion and use of freesoftware in commercial and freewareproducts alike. As a consequence, its mainpoints are that: o We don't promise that thissoftware works. However, we are beinterested in any kind of bug reports. (`as is'
distribution) o You can use this software forwhatever you want, in parts or full form,without having to pay us. (`royalty-free'usage) o You may not pretend that you wrotethis software. If you use it, or only parts of it,in a program, you must acknowledgesomewhere in your documentation thatyou've used the FreeType code. (`credits')We specifically permit and encourage theinclusion of this software, with or withoutmodifications, in commercial products,provided that all warranty or liability claimsare assumed by the product vendor. LegalTerms 0. Definitions Throughout this license,the terms `package', `FreeType Project', and`FreeType archive' refer to the set of filesoriginally distributed by the authors (DavidTurner, Robert Wilhelm, and WernerLemberg) as the `FreeType project', be theynamed as alpha, beta or final release. `You'refers to the licensee, or person using theproject, where `using' is a generic termincluding compiling the project's source codeas well as linking it to form a `program' or`executable'. This program is referred to as `aprogram using the FreeType engine'. Thislicense applies to all files distributed in theoriginal FreeType archive, including all sourcecode, binaries and documentation, unlessotherwise stated in the file in its original,unmodified form as distributed in the originalarchive. If you are unsure whether or not aparticular file is covered by this license, you

INSTRUMENTS AND CONTROLS
* Option/accessory, for more information, see Introduction.167
•Moving the second row seats forward/rear-ward (p. 176)
•Adjusting the second row backrest tilt(p. 177)
Manually operated front seats
The front seats can be adjusted in a number ofways to help provide the most comfortable seat-ing position.
Raise/lower the front edge of seat cushionby pumping up/down
Move the seat forward/rearward by pullingthe bar upward and moving the seat.
Change lumbar support by pressing the but-ton*
Raise/lower the seat by moving the controlup/down
Change backrest tilt by turning the wheel

WARNING
•Do not adjust the seat while driving. Theseat should be adjusted so that the brakepedal can be depressed fully. In addition,position the seat as far rearward as com-fort and control allow.
•Check that the seat is securely lockedinto position after adjusting.

Related information
•Turning seat heating* on and off (p. 210)
•Power front seats* (p. 168)
•Multifunctional front seats* (p. 170)
•Seat belts (p. 66)

INSTRUMENTS AND CONTROLS
}}
177

Related information
•Rear seats (p. 175)
•Getting into and out of the third row of seats(p. 179)
Adjusting the second row backresttilt
Backrest tilt can be adjusted separately for eachof the second row seats.

Center seat
1. Pull the strap on the center seat's right side.
2.Adjust backrest tilt forward/rearward bydecreasing/increasing pressure on it.
3. Release the strap to lock the backrest in thenew position and press the backrest until itslock engages.
Outboard seats
1. Pull the handle on the side of the seatupward.
2.Adjust backrest tilt forward/rearward bydecreasing/increasing pressure on it.
3. Release the handle to lock the backrest inthe new position and press the backrest untilits lock engages.

WARNING
Check that all backrests are securely lockedin place after changing the tilt angle.

Related information
•Rear seats (p. 175)
•Moving the second row seats forward/rear-ward (p. 176)

INSTRUMENTS AND CONTROLS
}}
* Option/accessory, for more information, see Introduction.179
3.Adjust the head restraint if necessary.

Outboard seats
To fold down the backrest:
1.Pull up and hold the handle on the side ofthe seat while the backrest is being foldeddown.
2. Be sure that the backrest and head restraintdo not come in contact with the front seatswhile they are being folded down. Fold downuntil the backrest locks in place.
> The seat cushion will move downward/forward as the backrest is folded down tocreate a flat surface. The head restraintfolds down automatically when the back-rest is folded down.
WARNING
After being folded down, be sure the back-rests are securely locked in place.
To return the backrest to the upright position:
1.Pull up and hold the handle on the side ofthe seat while the backrest is being foldedup.
2. Be sure that the backrest and head restraintdo not come in contact with the front seatswhile they are being folded up. Fold up thebackrest and release the handle.
3. Press the backrest until its lock engages.
4. Fold up the head restraint manually.

WARNING
Be sure the backrest and head restraint aresecurely locked in position after they havebeen folded up.

Related information
•Rear seats (p. 175)
•Adjusting the second row backrest tilt(p. 177)
•Folding the third row backrests (p. 180)
•Adjusting the second row head restraints(p. 175)
Getting into and out of the third rowof seats
The second row seats can be moved for easieraccess to the third row of seats*.
Getting into and out of a third row seat
To fold down the backrest:
1.Pull the handle on the upper side of one ofthe outboard second row seats upward/forward.
2. Fold the backrest forward and move theentire seat forward.
To return the backrest to the upright position:
–Move the seat back and fold up the backrestuntil it locks in position.

||
INSTRUMENTS AND CONTROLS
* Option/accessory, for more information, see Introduction.180

WARNING
Be sure the backrest and head restraint aresecurely locked in position after they havebeen folded up.

Related information
•Moving the second row seats forward/rear-ward (p. 176)
•Adjusting the second row backrest tilt(p. 177)
•Folding the second row backrests (p. 178)
Folding the third row backrests
The third row of seats has two individual seatingpositions that can be folded down manually orelectrically*.
NOTE
Before folding down the third row seats, itmay be necessary to change the position/tiltof the seats in the second row.
1. Pull the handle on the upper side of thebackrest upward/forward.
2.Be sure that the backrest and head restraintdo not come in contact with the seat aheadwhile they are being folded down. Fold thebackrest down.
> The seat cushion will move downward/forward as the backrest is folded down tocreate a flat surface. The head restraintfolds down automatically when the back-rest is folded down.
To return the backrest to the upright position,fold the backrest up until it locks in position. Thehead restraint has to be folded up manually.

WARNING
Be sure the backrest and head restraint aresecurely locked in position after they havebeen folded up.

Related information
•Rear seats (p. 175)
•Adjusting the second row head restraints(p. 175)
•Adjusting the second row backrest tilt(p. 177)
•Moving the second row seats forward/rear-ward (p. 176)

CLIMATE
* Option/accessory, for more information, see Introduction.194
Starting and stoppingpreconditioning
Preconditioning heats/cools the passenger com-partment prior to driving. Please note that thecharging cable must be connected.

Starting/stopping from the center
display
The preconditioning button in the Parking climate tabin Climate view.
1. Open Climate view in the center display.
2.Tap Parking climate .
The window for seat/steering wheel heating in Climateview's Parking climate tab
3. Tap the boxes to select if seat/steeringwheel heating is to be activated/deactivatedwhen preconditioning starts.
4.Tap Preconditioning.
>Preconditioning starts/stops and the indi-cator lights in the buttons will be on/off.

NOTE
Full preconditioning is only possible when thevehicle's charging cable is connected.
In other cases, the passenger compartmentcan be cooled for 3 minutes in warm weather.This function is started from the Parkingclimate tab in the center display's Climateview.
The vehicle's doors and windows should beclosed during preconditioning.
Starting from a cell phone *
Starting preconditioning and checking the cur-rent settings can be done from a cell phone withthe Volvo On Call mobile app. Preconditioningheats the passenger compartment to a comforta-ble temperature or cools the compartment to thecurrent ambient temperature.
If the vehicle is equipped with the optionalEngine Remote Start (ERS), the air conditioningcan be used to pre-cool the passenger compart-ment to a comfortable temperature.

Related information
•Setting the parking climate (preconditioning)timer (p. 192)
•Activating/deactivating the parking climatetimer (p. 191)
•Hybrid battery charging cable (p. 405)

LOADING AND STORAGE
* Option/accessory, for more information, see Introduction.218
Cargo space
The vehicle has flexible cargo capacity thatmakes it possible to load and secure largeobjects.
By folding down the backrests in the second andthird rows* of seats, the cargo capacity of thevehicle increases considerably. To make loadingeasier, the rear section of the vehicle can beraised and lowered using the pneumatic suspen-sion*. Use the load anchoring eyelets or the gro-cery bag holder to secure objects and the cargocompartment cover to help conceal the load.
The jack* and tools can be found under the cargocompartment's floor.

Related information
•Loading (p. 218)
•Cargo compartment cover* (p. 227)
•Cargo net (p. 223)
•Grocery bag holder (p. 223)
•Load anchoring eyelets (p. 226)
•Steel cargo grid* (p. 225)
Loading
The load carrying capacity of your vehicle isdetermined by factors such as the number ofpassengers, the amount of cargo, the weight ofany accessories that may be installed, etc.
Loading recommendations
•Load objects in the cargo compartmentagainst the backrest whenever possible.
•If the backrests of the second row seats arefolded down, they should not be in contactwith the front seat backrests. This couldimpede the function of the WhiplashProtection System (WHIPS).
•Unstable loads can be secured to the loadanchoring eyelets with straps or web lash-ings to help keep them from shifting.
•Stop the engine and apply the parking brakewhen loading or unloading long objects. Thegear selector can be knocked out of positionby long loads, which could set the vehicle inmotion.
WARNING
•Stop the engine, put the gear selector inP, and apply the parking brake whenloading or unloading long objects.
•The vehicle's driving characteristics maychange depending on the weight and dis-tribution of the load.
•A 44-pound (20 kg) object produces aforce of 2,200 pounds (1,000 kg) in ahead-on collision at 30 mph (50 km/h).
•The cargo area and rear seat should notbe loaded to a level higher than 2 in.(5 cm) below the upper edge of the rearside windows. Objects placed higher thanthis level could impede the function ofthe Inflatable Curtain.

WARNING
•Cover sharp edges on long loads to helpprevent injury to occupants. Secure theload to help prevent shifting during sud-den stops.
•Always secure large and heavy objectswith a seat belt or cargo retaining straps.
•Always secure the load to help prevent itfrom moving in the event of sudden stops.
•Switch off the engine, apply the parkingbrake and put the gear selector in Pwhen loading and unloading the vehicle.