2017 VOLVO XC90 TWIN ENGINE HYBRID driver seat adjustment

INTRODUCTION
}}
41
Function view buttons
The Function view, which is one of the centerdisplay's basic views, contains all of the vehicle's
on-screen function buttons. From the Homeview, swipe from left to right on the screen tocome to the Function view.

Different types of buttons
There are three different types of vehicle functionbuttons as listed in the following table.
Type of buttonFunctionsVehicle function affected
Function buttonsHave On/Off modes.
An LED indicator light to the left of the button's icon will illuminate when a function isactive. Press the button to turn the function on or off.
Most of the buttons in the function view arefunction buttons.
Start buttonsDo not have On/Off modes.
Pressing a start button opens a function's window, e.g., a window for adjusting thedriver's seat.
•Camera.
•Headrest fold.
•Functions for folding down a seat.
•Head-up display adjustments.
Parking buttonsHave On/Off and scanning modes.
Similar to function buttons but have an additional parking scanning mode.
•Park In.
•Park Out.

Button modes
A function is activated (on) when the LED indicator isgreen
A function is deactivated (off) when the LED indicator isoff
When a function or parking button's LED indica-tor is green, the function is activated. When afunction is initially activated, an additional text willbe displayed (certain functions only) in the buttonfor approx. 5 seconds, after which the button willbe displayed with the LED indicator illuminated.
Press the button briefly to deactivate the func-tion.

INSTRUMENTS AND CONTROLS
}}
123

NOTE
The driver's ability to see information in theHUD may be impeded by:
•the use of polarizing sunglasses
•the use of an aftermarket or non-Volvoreplacement windshield
•not sitting in the center of the driver'sseat
•objects on the HUD projector glass onthe dashboard
•certain ambient lighting conditions
•certain types of vision problems, whichmay also result in headaches or eyestrain.
•Activating/deactivating and settings forHUD are only possible when an image isprojected on the windshield. The enginemust be running.

Activating/deactivating HUD
HUD can be activated in two ways in the centerdisplay:

Via Function view
Tap the Head-up display but-ton.
Via settings
1.Tap Settings in Top view.
2.Tap My CarDisplays.
3.Select/deselect Head-Up Display.
This selection can be stored as a personal set-ting in a driver profile.

Selecting display alternatives
1.Tap Settings in Top view.
2.Tap My CarDisplaysHead-UpDisplay Options.
Tap Go to the center display's Settings viewand select Driver Display & Head-upDisplay.
3.Select : Show Navigation In Head-UpDisplay, Road Sign Information In Head-Up Display, Show Driver Support InHead-Up Display or Show Phone InHead-Up Display.
This selection can be stored as a personal set-ting in a driver profile.
Adjusting HUD brightness and height
position
1.Tap Head-up display adjustments in thecenter display's Function view.
2.Use the right-side steering wheel keypad toadjust the HUD's brightness and height posi-tion on the windshield in the driver's field ofvision.
Reduce brightness
Increase brightness
Higher position

INSTRUMENTS AND CONTROLS
}}
* Option/accessory, for more information, see Introduction.169
Adjusting the passenger's seat from
the driver's seat*
Using the controls on the side of the driver'sseat, the driver can adjust the position of thefront passenger's seat.

Activating the function in the center
display
From the center display, the function can be acti-vated in two ways.
After activating the function, adjust the passeng-er's seat within 10 seconds. If no adjustmentsare made in that time span, the function deacti-vates automatically.

Activating from Function view
1. Go to the center display's Function view.
2.Activate the function by tapping Adjustpassenger seat.

Activating from Settings
–In the center display, select SettingsMy
CarSeatsAdjust Passenger SeatFrom Driver Position.
Power seat controls
Move the passenger's seat forward/rearwardby moving the control forward/rearward.
Change the passenger seat's backrest tilt bymoving the control forward/rearward.
Related information
•Power front seats* (p. 168)
•Adjusting power front seats* (p. 168)
•Seat belts (p. 66)
Using the power seat memory
function*
The memory function can be used to store thesettings (positions) of the power front seats*,door mirrors and the head-up display*.
Three different settings can be stored using thisfunction. Memory controls are found on one orboth of the front doors*.
Button for storing a position
Button for storing a position
Button for storing a position
M (memory) button

Storing a position
1. Adjust the seat, door mirrors and head-updisplay to the desired positions.

||
INSTRUMENTS AND CONTROLS
* Option/accessory, for more information, see Introduction.170
2.Press and release the M button. The indica-tor light in the button will illuminate.
3.Press button 1, 2 or 3 within 3 seconds tostore the current position of the seat/mirrors/head-up display in the selected but-ton.
> When the position has been stored in theselected button, an audible signal willsound and the indicator light in the M but-ton will go out.
If none of the buttons (1, 2 or 3) are pressedwithin 3 seconds, the indicator light in the M but-ton will go out and the position will not be stored.
The seat/mirrors/head-up display must bemoved before new settings can be stored.

Using a stored position
A stored position can be used when one of thefront doors is opened or closed:

Front door open
–Press one of the bottons (1–3) briefly. Theseat, door mirrors and head-up display willmove to the positions stored in that button.

Front door closed
–Press and hold one of the buttons (1–3) untilthe seat, door mirrors and head-up displayhave moved to the positions stored in thatbutton.
The seat, door mirrors and head-up display willstop automatically if the button is released beforethe they have reached the stored positions.
WARNING
•Because the driver's seat can be adjustedwith the ignition off, children should neverbe left unattended in the vehicle.
•Movement of the seat can be STOPPEDat any time by pressing any button on thepower seat control panel.
•Do not adjust the seat while driving. Theseat should be adjusted so that the brakepedal can be depressed fully. In addition,position the seat as far rearward as com-fort and control allow.
•The seat rails on the floor must not beobstructed in any way when the seat is inmotion.

Related information
•Adjusting power front seats* (p. 168)
•Power front seats* (p. 168)
Multifunctional front seats*
In addition to the adjustment settings offered bythe power seat controls, the multifunction controlprovides additional possibilities for convenienceand comfort.
Multifunction control on the side of the seat
The multifunction control can be used to adjustlumbar support*, the backrest's side bolsters*, thelength of the seat cushion and the massagefunction*. The adjustment settings made with thecontrol are shown in the center display* and cer-tain settings can be made directly from the cen-ter display.

Center display
The adjustment settings for the driver and pas-senger seats made using the multifunction con-trol are shown in the center display. If only oneseat is adjusted, the settings are shown in the

INSTRUMENTS AND CONTROLS
}}
* Option/accessory, for more information, see Introduction.171
center of the display. If both seats are adjusted,the settings for the driver seat are shown on theupper half of the screen and the ones made forthe passenger seat are on the lower half.
Press the Home button on the center console toexit the seat adjustment setting view.

Related information
•Power front seats* (p. 168)
•Adjusting function settings in the multifunc-tional front seats* (p. 171)
•Turning seat heating* on and off (p. 210)
Adjusting function settings in the
multifunctional front seats*
The multifunction controls on the side of the seatas well as the center display can be used tomake seat adjustments. The adjustment settingsare shown in the center display*.
Multifunction control on the side of the seat
Turn the control up or down to activate.

Front seat massage settings *
The front seat backrests have a massage func-tion. Air-filled cushions provide the massagingaction and a number of settings are available.
The massage function can only be used whenthe engine is running.
Massage view in the center display
1. Activate the multifunction control by turningit up or down. Seat settings will be displayedin the center display.
2.Tap Massage in the seat settings view.