||
INSTRUMENTS AND CONTROLS
* Option/accessory, for more information, see Introduction.172
3. Select massage settings by tapping the cen-ter display or by moving the cursor up/downusing the multifunction control's upper/lowerbuttons. Change a setting in the selectedfunction by tapping the arrows on the centerdisplay or by using the multifunction control'sfront/rear buttons.
Massage settings
The following massage settings are available:
•On/Off.
•Program 1-5: There are 5 preset massageprograms. Select Swell, Tread, Advanced,Lumbar or Shoulder.
•Intensity: Select Low, Normal or High.
•Speed: Select Slow, Normal or Fast.
Restarting the massage function
Massage restart button in the center display
The massage function switches off automaticallyafter 20 minutes and must be restarted manuallyfor continued use.
Tap Restart in the center display to restart theselected massage program.
Adjusting the side bolsters in the front
seats *
The side bolsters in the front seat backrests canbe inflated/deflated to adjust the amount of sup-port provided.
Side bolster view in the center display
1. Activate the multifunction control on the sideof the seat by moving it up/down. The seatsettings view will appear in the center dis-play.
2.Select Side bolsters in the seat settingsview.
•Tap the front button to increase bolstersupport.
•Tap the rear button to decrease bolstersupport.
INSTRUMENTS AND CONTROLS
}}
* Option/accessory, for more information, see Introduction.173
Adjusting front seat lumbar support *
Lumbar support can be adjusted up/down/front/rear.
Lumbar support view in the center display
1. Activate the multifunction control on the sideof the seat by moving it up/down. The seatsettings view will appear in the center dis-play.
2.Select Lumbar in the seat settings view.
•Tap the button up/down to move lumbarsupport up/down.
•Tap the front button to make lumbar sup-port firmer.
•Tap the rear button to make lumbar sup-port softer.
Extending the seat cushion
The seat cushion can be extended/retractedusing the multifunction control.
Seat cushion extension view in the center display
1. Activate the multifunction control on the sideof the seat by moving it up/down. The seatsettings view will appear in the center dis-play.
2.Select Cushion extension in the seat set-tings view.
•Tap the front button to extend the cush-ion.
•Tap the rear button to retract the cushion.
||
INSTRUMENTS AND CONTROLS
* Option/accessory, for more information, see Introduction.174
Related information
•Multifunctional front seats* (p. 170)
Easy access to and from the driverseat
The Easy Ingress & Egress function can beused to make getting into and out of the driver'sseat easier.
Easy egress
To make getting out of the driver's seat easier,the seat is lowered, the side bolster deflates andthe seat cushion retracts at the same time.
The easy egress function must be activated inthe center display.
–Switch off the engine and open the driver'sdoor.
>The seat, side bolsters and seat cushionall move at the same time to a positionthat makes it easier to leave the seat.
Easy ingress
The seat remains in the easy egress positionwhen the driver leaves the vehicle. When thedriver returns to the vehicle, the seat is in a posi-tion to make sitting down easier. When the driveris seated, has buckled the seat belt and has putthe ignition in at least mode 1, the seat will returnto the driver's preferred position.
Activating/deactivating the function
1.In the center display, select SettingsMy
CarSeats.
2. Activate/deactivate the function by select-ing/deselecting the Easy Ingress & Egressbox.
Related information
•Power front seats* (p. 168)
•Ignition modes (p. 400)
INSTRUMENTS AND CONTROLS
}}
181
Driver profiles
Many of the vehicle's settings can be adapted tothe driver's personal preferences and saved inone or more driver profiles.
The personal settings made are automaticallysaved in the active driver profile. Each remote keyis linked to a driver profile and when this key isused, the vehicle's settings are adapted accord-ing to the specific ones saved in that profile.
Which settings are saved in driver
profiles?
The settings that can be changed in the vehicleare either personal or global.
Changes made to personal settings are savedautomatically in the active (current) driver profile,assuming that this profile is not locked. See thearticle "Editing a driver profile" for additionalinformation.
Changes to global settings are not saved in aspecific driver profile but instead affect all driverprofiles.
Global settings
Global settings and parameters remain the sameregardless of which driver profile is currentlyactive.
Keyboard layout is an example of a global setting.If driver profile X is used to add additional key-board languages, these languages will also beavailable even if driver profile Y is used. This type
of global change is not specific to a single driverprofile.
Personal settings
If driver profile X has been used to e.g., set thebrightness for the center display, driver profile Ywill not be affected by this setting since it is spe-cific (personal) to driver profile X.
See also the article "Categories in Settings view"for an overview of global and personal settings.
Related information
•Editing a driver profile (p. 182)
•Categories in Settings view (p. 116)
Selecting a driver profile
The most recently selected driver profile will beused automatically the next time the vehicle isstarted. However, a different driver profile can beselected after the vehicle has started.
When the vehicle is started, the most recentlyselected driver profile will be shown at the top ofthe center display. There are two alternatives forchanging to another driver profile.
Alternative1:
1.Tap the name of the drive profile shown atthe top of the center display when the vehi-cle has been started.
> A list of driver profiles that can beselected will be displayed.
2. Select the desired profile.
3.Tap Confirm.
>The new driver profile has now beenselected and the system will load the set-tings stored in that profile.
Alternative 2:
1. Pull down the center display's Top view.
2.Tap Profile.
>A list of driver profiles that can beselected will be displayed.
3. Select the desired profile.
||
INSTRUMENTS AND CONTROLS
182
4.Tap Confirm.
>The new driver profile has now beenselected and the system will load the set-tings stored in that profile.
Related information
•Driver profiles (p. 181)
•Editing a driver profile (p. 182)
•Linking a remote key to a driver profile(p. 183)
Editing a driver profile
The driver profiles can be edited to e.g., changetheir names or lock a profile.
All types of changes in driver profiles are made
from the center display's Top view: Settings
SystemDriver Profile.
Changing a profile's name
Changing a driver profile's name is done from theDriver Profile window:
1.Tap Edit Profile.
>A menu will open in which the profile canbe edited.
2.Tap the Profile Name box.
>A keyboard will be displayed and can be
used to change the name. Tap toclose the keyboard.
3.Save the changes by tapping Back/Close.
>The name has now been changed.
Locking/unlocking a driver profile
In some cases, it may be desirable to not savecertain settings in the active driver profile. Forthis reason, the profile can be locked. To lock/unlock a profile from the Driver Profile window:
1.Tap Edit Profile.
>A menu will open in which the profile canbe edited.
2.Tap Protect My Profile to lock/unlock theprofile.
3.Save the change by tapping Back/Close.
>When a profile is locked, settings that arechanged in the vehicle will not be savedautomatically in the profile and will have tosaved manually by tapping Savechanges. However, when the profile isunlocked, the changes will be saved auto-matically.
Resetting driver profile changes
Settings that have been changed and saved inone or more driver profiles can be reset.
NOTE
Global Reset is only possible when the vehi-cle is stationary.
INSTRUMENTS AND CONTROLS
}}
183
1.Tap Settings in the center display's Topview.
2.Select SystemGlobal ResetResetPersonal Settings.
3.Select one of the following: Reset for theactive profile, Reset for all profiles orCancel.
Related information
•Driver profiles (p. 181)
•Resetting the settings view (p. 119)
•Using the center display keyboard (p. 36)
•Using the center display (p. 50)
•Selecting a driver profile (p. 181)
Linking a remote key to a driverprofile
A remote key can be linked to a driver profile,which means that all of the settings stored in thedriver profile will apply each time that particularremote key is used with the vehicle.
A remote key is not initially linked to a specificdriver profile. When the key is used to unlock thevehicle/start the engine for the first time, theGuest profile will be used.
A driver profile can be selected manually eachtime the vehicle is unlocked/started without aremote key being linked to that profile. When thevehicle is started, the most recently selecteddriver profile will be activated. If the key has previ-ously been linked to a driver profile, it is not nec-essary to manually select a profile when that par-ticular key is used.
Linking a remote key to a driver profile
for the first time
Select a profile to link to the remote key (if thatprofile is not already active).
1. Pull down the center display's Top view andtap Settings.
2.Tap SystemDriver Profile.
3. Tap the profile to be linked to the remotekey. The Guest profile cannot be linked to aremote key.
4.Open Top view in the center display and tap
SettingsSystemDriver ProfileEdit Profile.
5.Select Connect key to link the selected pro-file to the remote key currently being used. Aprofile can only be linked to the remote keythat is currently being used. If there are sev-eral keys in the vehicle at the same time,More than one key is found, put the keyyou want to connect on backup readerwill be displayed.
Location of the backup reader in the tunnel console>When Profile connected to key is dis-played, the remote key and the selecteddriver profile have been linked.
6.Tap OK to confirm.
>The key currently in use will remain linkedto the selected driver profile as long asthe Connect key box is not deselected.
||
INSTRUMENTS AND CONTROLS
184
Related information
•Driver profiles (p. 181)
•Editing a driver profile (p. 182)
•Remote key (p. 238)
Importing/exporting a driver profilefrom/to a USB flash drive
The personal settings stored in a driver profilecan be imported or exported to another vehicleusing a USB flash drive.
The following steps describe the procedure forimporting or exporting personal settings saved ina driver profile to a USB flash drive:
1.Tap Settings in the center display's Topview.
2.Tap SystemDriver Profile.
3. Insert a flash drive in the USB socket in thetunnel console.
USB socket in the tunnel console
4.Select Import Profile From USB/ExportProfile To USB.
NOTE
•The Guest profile cannot be imported orexported
•Several profiles can be exported to USBbut only one profile can be imported.When a profile is imported, it overwritesthe one currently being used in the vehicle.
5. Select the profile(s) to be imported/exported.
6.Select OK.
If an export does not succeed, this may be dueto:
•USB flash drive is full.
•USB flash drive was not inserted correctly orwas removed before the export was comple-ted.
If an import does not succeed, this may be dueto:
•USB flash drive was not inserted correctly orwas removed before the import was comple-ted.
•No driver profile had been stored on the USBflash drive.
•The driver profile file on the USB flash driveis damaged.
CLIMATE
188
Climate control system
The vehicle is equipped with Electronic ClimateControl (ECC) that cools, heats, dehumidifiesand filters the air in the passenger compartment.
4-zone climate system
4-zone system climate zones
The 4-zone climate system makes it possible toset the left- and right-side temperatures sepa-rately for the front and rears seats.
All climate system settings are made from thecenter display and the buttons in the center con-sole. Settings for the rear seats can also bemade from the climate system panel on the rearside of the tunnel console.
Related information
•Climate system sensors (p. 189)
•Perceived temperature (p. 188)
•Climate system controls (p. 199)
•Air quality (p. 196)
•Air distribution (p. 212)
•Air conditioning refrigerant (p. 565)
•Parking climate (preconditioning) (p. 189)
Perceived temperature
The climate system regulates passenger com-partment temperature based on the perceivedtemperature, not on the actual one.
The selected passenger compartment tempera-ture is based on a physical perception relating tothe current ambient temperature, air flow, humid-ity, sunlight in the passenger compartment, etc.
The system's sunlight sensor monitors the side ofthe car where sunlight is entering the passengercompartment. This means that the actual tem-perature may differ between the right and leftsides of the compartment, even if the tempera-ture setting is the same for both sides.
Related information
•Climate system sensors (p. 189)
•Climate control system (p. 188)