2017 VOLVO XC90 TWIN ENGINE HYBRID display

INSTRUMENTS AND CONTROLS
* Option/accessory, for more information, see Introduction.161

Opening/closing the App menu
–Press the App menu (1).
The App menu cannot be opened if there areunread/unconfirmed messages in the instru-ment panel. The message must be confirmedbefore the App menu can be opened.
>The App menu opens/closes.
The App menu closes automatically after a periodof inactivity or after certain selections are made.

Navigating and making selections in the
App menu
1. Navigate between the various apps by press-ing left or right (3).
> Functions for the preceding/next app willbe displayed in the App menu.
2. Scroll through the current app's selectionsusing up or down (4).
3. Confirm or select a function by pressing (2).
> The function will be activated and in cer-tain cases, the App menu will close.

Related information
•Instrument panel App menu (p. 160)
Using the windshield wipers
Before using the wipers, ice and snow shouldbe removed from the windshield. Be sure thewiper blades are not frozen in place.
Right-side steering wheel lever
Thumb wheel to set rain sensor* sensitivity/interval wiper speed
Single sweep
Move the lever down and release it for asingle sweep.

Wipers off
Move the lever to position 0 to turn offthe windshield wipers.

Interval wipers
Set the wiper interval speed by movingthe thumb wheel upward or downward.
Continuous wipers
Move the lever upward for the wipers tooperate at normal speed.

NOTE
Before using the wipers, be sure that thewiper blades are not frozen onto the wind-shield and that any ice or snow on the wind-shield has been removed.
Move the lever upward to the next posi-tion for maximum wiper speed.

Related information
•Tailgate window wiper and washer (p. 164)
•Activating/deactivating the rain sensor(p. 162)
•Windshield and headlight washers (p. 163)

INSTRUMENTS AND CONTROLS
162
Activating/deactivating the rainsensor
The rain sensor monitors the amount of water onthe windshield and automatically regulates wiperspeed.
Right-side steering wheel lever
Rain sensor button
Thumb wheel for adjusting sensitivity/intervalwiper speed
When the rain sensor is activated, the symbol will illuminate in the instrument panel.

Activating the rain sensor
When activating the rain sensor, the engine mustbe running or the ignition must be in mode I or II.
The windshield wiper lever must also be in posi-tion 0 or in the single sweep position.
Activate the rain sensor by pressing the button. The wipers will make one sweep.
If the lever is pressed down, the wipers will makeadditional sweeps across the windshield.
Move the thumb wheel upward for increased sen-sitivity or downward for decreased sensitivity. Thewipers will make one extra sweep if the thumbwheel is moved upward.
Deactivating the rain sensor
Deactivate the rain sensor by pressing the button or by moving the lever upward to anotherwiper position.
The rain sensor is automatically deactivated inignition mode 0.
The rain sensor is also automatically deactivatedwhen the wipers blades are put in the serviceposition and will reactivate when the wipers havebeen returned to the normal operating position.

CAUTION
Deactivate the rain sensor when washing thevehicle in an automatic car wash if the engineis running or if the ignition is left in mode I orII. The symbol in the instrument panel will goout. If the rain sensor is not deactivated, thewipers may start inadvertently in the car washand could be damaged.
Activating/deactivating the memory
function
The rain sensor's memory function can be set toactivate the rain sensor each time the engine isstarted:
1.In the center display, select SettingsMy
CarWipers
2.Activate by selecting the Rain SensorMemory box.
Deactivate by deselecting the Rain SensorMemory box.

Related information
•Using the windshield wipers (p. 161)
•Windshield wipers in the service position(p. 543)
•Tailgate window wiper and washer (p. 164)

INSTRUMENTS AND CONTROLS
* Option/accessory, for more information, see Introduction.164
Tailgate window wiper and washer
Start the tailgate window wiper/washer with con-trols on the right-side steering wheel lever.

NOTE
The rear wiper is equipped with a cut-offfunction, which means that it will not operateif its electric motor overheats. The wiper willfunction again after a cool-down period(30 seconds or longer, depending on the heatof the motor and ambient temperature condi-tions).

Using the tailgate wiper/washer
Press for tailgate interval wiper
Press for tailgate continuous wiper
–Move the lever forward to wash/wipe the tail-gate window.
Tailgate wiper and reverse gear
1.In the center display, select SettingsMy
CarWipers.
2. Activate/deactivate by selecting/deselectingthe Auto Rear Wiper box.
If the windshield wipers are on and the transmis-sion is put into reverse gear, the tailgate wiperwill start. This function is deactivated when a dif-ferent gear is selected.

Related information
•Using the windshield wipers (p. 161)
•Windshield and headlight washers (p. 163)
•Refilling the windshield washer fluid reservoir(p. 547)
•Activating/deactivating the rain sensor(p. 162)
Steering wheel
The steering wheel has controls for the horn,certain optional driver support systems, menus/messages and paddles for manually shiftinggears*.

INSTRUMENTS AND CONTROLS
* Option/accessory, for more information, see Introduction.165
Steering wheel keypads and paddles*
Driver support system controls15
Paddles for manually shifting gears*
Keypad for voice controls, adjusting thehead-up display*accessing menus and mes-sages, and handling phone calls

Horn
The horn is located in the steering wheel hub.

Related information
•Adjusting the steering wheel (p. 166)
•Turning steering wheel heating* on and off(p. 208)
•Cruise Control (CC) (p. 274)
•Speed limiter (SL)* (p. 267)
•Adaptive Cruise Control (ACC)* (p. 281)
•Distance Alert* (p. 279)
•Pilot Assist-2* (p. 305)
•Steering wheel paddles* (p. 427)
•Voice control (p. 125)
•Head-up display (HUD)* (p. 122)
•Using the instrument panel App menu(p. 160)
•Phone (p. 448)
15Cruise control*, Speed limiter *, Adaptive cruise control*, Distance alert* and Pilot Assist*.

INSTRUMENTS AND CONTROLS
* Option/accessory, for more information, see Introduction.166
Adjusting the steering wheel
The steering wheel can be adjusted to variouspositions.
Adjusting the steering wheel
Lever for releasing/locking the steeringwheel
Possible positions
The steering wheel's height and reach can beadjusted. To do so:
1.Push the lever down to release the steeringwheel.
2. Adjust the steering wheel to a suitable posi-tion.
3. Pull back the lever to lock the steering wheelin place. If the lever is difficult to pull intoplace, press the steering wheel lightly at thesame time as you pull the lever.

WARNING
Never adjust the steering wheel while driving.
If the vehicle is equipped with the optionalspeed-dependent power steering, the level ofsteering force can be adjusted. The force level isadjusted according to the vehicle's speed.

Related information
•Steering wheel (p. 164)
•Adjustable steering force (p. 262)
Seats
The vehicle is equipped with 7 seats. The frontseats can be adjusted electronically* or man-ually. The second and third row seats areadjusted primarily manually.
The adjustment settings for the power frontseats*, door mirrors and the head-up display canbe stored in memory buttons.
Using the multi-function control*, comfort in thefront seats can be further enhance by e.g., adjust-ing the lumbar support or extending the length ofthe front seat cushion.
The rear seats can be folded down and theirhead restraints can be adjusted. The second rowseats can be moved forward/rearward and theirbackrest tilt can also be changed.

Related information
•Adjusting power front seats* (p. 168)
•Adjusting function settings in the multifunc-tional front seats* (p. 171)
•Manually operated front seats (p. 167)
•Using the power seat memory function*(p. 169)
•Folding the second row backrests (p. 178)
•Getting into and out of the third row of seats(p. 179)

INSTRUMENTS AND CONTROLS
}}
* Option/accessory, for more information, see Introduction.169
Adjusting the passenger's seat from
the driver's seat*
Using the controls on the side of the driver'sseat, the driver can adjust the position of thefront passenger's seat.

Activating the function in the center
display
From the center display, the function can be acti-vated in two ways.
After activating the function, adjust the passeng-er's seat within 10 seconds. If no adjustmentsare made in that time span, the function deacti-vates automatically.

Activating from Function view
1. Go to the center display's Function view.
2.Activate the function by tapping Adjustpassenger seat.

Activating from Settings
–In the center display, select SettingsMy
CarSeatsAdjust Passenger SeatFrom Driver Position.
Power seat controls
Move the passenger's seat forward/rearwardby moving the control forward/rearward.
Change the passenger seat's backrest tilt bymoving the control forward/rearward.
Related information
•Power front seats* (p. 168)
•Adjusting power front seats* (p. 168)
•Seat belts (p. 66)
Using the power seat memory
function*
The memory function can be used to store thesettings (positions) of the power front seats*,door mirrors and the head-up display*.
Three different settings can be stored using thisfunction. Memory controls are found on one orboth of the front doors*.
Button for storing a position
Button for storing a position
Button for storing a position
M (memory) button

Storing a position
1. Adjust the seat, door mirrors and head-updisplay to the desired positions.

||
INSTRUMENTS AND CONTROLS
* Option/accessory, for more information, see Introduction.170
2.Press and release the M button. The indica-tor light in the button will illuminate.
3.Press button 1, 2 or 3 within 3 seconds tostore the current position of the seat/mirrors/head-up display in the selected but-ton.
> When the position has been stored in theselected button, an audible signal willsound and the indicator light in the M but-ton will go out.
If none of the buttons (1, 2 or 3) are pressedwithin 3 seconds, the indicator light in the M but-ton will go out and the position will not be stored.
The seat/mirrors/head-up display must bemoved before new settings can be stored.

Using a stored position
A stored position can be used when one of thefront doors is opened or closed:

Front door open
–Press one of the bottons (1–3) briefly. Theseat, door mirrors and head-up display willmove to the positions stored in that button.

Front door closed
–Press and hold one of the buttons (1–3) untilthe seat, door mirrors and head-up displayhave moved to the positions stored in thatbutton.
The seat, door mirrors and head-up display willstop automatically if the button is released beforethe they have reached the stored positions.
WARNING
•Because the driver's seat can be adjustedwith the ignition off, children should neverbe left unattended in the vehicle.
•Movement of the seat can be STOPPEDat any time by pressing any button on thepower seat control panel.
•Do not adjust the seat while driving. Theseat should be adjusted so that the brakepedal can be depressed fully. In addition,position the seat as far rearward as com-fort and control allow.
•The seat rails on the floor must not beobstructed in any way when the seat is inmotion.

Related information
•Adjusting power front seats* (p. 168)
•Power front seats* (p. 168)
Multifunctional front seats*
In addition to the adjustment settings offered bythe power seat controls, the multifunction controlprovides additional possibilities for convenienceand comfort.
Multifunction control on the side of the seat
The multifunction control can be used to adjustlumbar support*, the backrest's side bolsters*, thelength of the seat cushion and the massagefunction*. The adjustment settings made with thecontrol are shown in the center display* and cer-tain settings can be made directly from the cen-ter display.

Center display
The adjustment settings for the driver and pas-senger seats made using the multifunction con-trol are shown in the center display. If only oneseat is adjusted, the settings are shown in the

INSTRUMENTS AND CONTROLS
}}
* Option/accessory, for more information, see Introduction.171
center of the display. If both seats are adjusted,the settings for the driver seat are shown on theupper half of the screen and the ones made forthe passenger seat are on the lower half.
Press the Home button on the center console toexit the seat adjustment setting view.

Related information
•Power front seats* (p. 168)
•Adjusting function settings in the multifunc-tional front seats* (p. 171)
•Turning seat heating* on and off (p. 210)
Adjusting function settings in the
multifunctional front seats*
The multifunction controls on the side of the seatas well as the center display can be used tomake seat adjustments. The adjustment settingsare shown in the center display*.
Multifunction control on the side of the seat
Turn the control up or down to activate.

Front seat massage settings *
The front seat backrests have a massage func-tion. Air-filled cushions provide the massagingaction and a number of settings are available.
The massage function can only be used whenthe engine is running.
Massage view in the center display
1. Activate the multifunction control by turningit up or down. Seat settings will be displayedin the center display.
2.Tap Massage in the seat settings view.