INSTRUMENTS AND CONTROLS
* Option/accessory.151
Rear window wiper and washer
Rear window wiper and washer clean the rear window. Washing/wiping is started and settingsare changed by means of the right-hand steeringwheel stalk switch.
NOTE
The rear window wiper is equipped with over- heating protection which means that themotor is switched off if it overheats. The rearwindow wiper works again after a cooling-down period.
Using the rear window wiper and washer
Select for intermittent wiping with the
rear window wiper.
Select for continuous speed with the
rear window wiper.
–Move the right-hand steering wheel stalk switch forward to start rear window washingand wiping.
Activating/deactivating wiping when reversing
1. Press Settings in the top view in the centre
display.
2. Press
My CarWipers.
3. Select
Auto Rear Wiper to activate/deacti-
vate wiping when reversing.
Engaging reverse gear while the windscreen wip- ers are on initiates rear window wiping. The func- tion stops when reverse gear is disengaged. If the rear window wiper is already on at continu- ous speed, no change is made.
Related information
• Using windscreen wipers (p. 148)
• Windscreen and headlamp washers (p. 150)
• Activating/deactivating the rain sensor(p. 149)
Power windows
Using the driver's door control panel, all power windows can be operated - using the controlpanels in the other doors operates the powerwindow in the individual door.
Driver's door control panel.
Electric child safety locks * that prevent chil-
dren from being able to open the rear doors from inside and open/close the rear win-dows.
Controls for rear windows.
Controls for front windows.
Related information
• Operating power windows (p. 152)
• Child safety locks (p. 261)
||
CLIMATE CONTROL
* Option/accessory.
192
Temperature control.
3. Regulate the temperature by means of the
following:
• drag the control to the desired tempera- ture
• press
+/− to raise/lower the temperature
gradually.
> The temperature changes and the button shows the set temperature.
From the rear seat
Temperature control on the climate panel at the rear of the tunnel console.
–Press the left or right-hand side > buttons
on the tunnel console's climate panel in order to lower/raise the temperature gradu-ally.
> The temperature changes and the screen in the climate panel shows the set tem- perature.
NOTE
Heating or cooling cannot be hastened by selecting a higher or lower temperature thanthe actual desired temperature.
Related information
• Climate controls (p. 186)
• Climate controls in the centre display (p. 187)
• Climate controls at the rear of the tunnel console
* (p. 188)
• Perceived temperature (p. 183)
CLIMATE CONTROL
}}
201
Table of air distribution optionsThe air distribution can be changed manually if required. The following options are available forsetting.
Air distribution Purpose
If all air distribution buttons are deselected in manual mode, the climate control system returns to automatically regulated climate control.
Main air flow from the defroster vents. Some air flows from other air vents. Counteracts misting and icing in a cold and humid climate
(to achieve this, fan level must not be low).
Main air flow from the air vents in the instrument panel. Some air flows from other air vents.Provides efficient cooling in a hot climate.
Main air flow from the air vents at the floor. Some air flows from other air vents.Provides heat or cooling to the floor.
||
CLIMATE CONTROL
* Option/accessory.
204
Seat heating indication and controls on the climate panel at the rear of the tunnel console.
–Press repeatedly on the left or right-hand side's buttons for heated seats on the tunnelconsole's climate panel to switch between the four levels:
Off, High, Medium and Low.
> The level changes and the screen in the climate panel shows the set level.
WARNING
Heated seats must not be used by people who find it difficult to perceive an increase intemperature due to a lack of sensation or whootherwise have problems operating the con-trols for the heated seats. Otherwise they maysuffer burn injuries.
Activating/deactivating automatic start of heated seats
It is possible to set whether automatic start of heated seats should be activated/deactivatedwhen the engine is started. With automatic startactivated, heating will start in the event of lowambient temperature. 1. Press
Settings in the top view in the centre
display.
2. Press
Climate.
3. Under
Auto Driver Seat Heating Level andAuto Passenger Seat Heating Level,
select Off,Low,Medium or High in order to
activate/deactivate the automatic starting of the heating for the driver and passengerseats and to select the level.
Related information
• Climate controls (p. 186)
• Climate controls in the centre display(p. 187)
• Climate controls at the rear of the tunnel console
* (p. 188)
Activating/deactivating ventilation of the seats *
The seats can be ventilated, for example, to remove moisture from clothes.
The ventilation system consists of fans in the seats and backrests that draw air through theseat upholstery. The cooling effect increases thecooler the passenger compartment air becomes.The system can be activated when the engine isrunning and takes seat temperature, solar radia-tion and outside temperature into consideration.
CLIMATE CONTROL
}}
* Option/accessory.205
Activating/deactivating ventilation of the front seat*
Steering wheel and seat buttons in the climate row.
1. Press the left or right-hand side's steering
wheel and seat button in the climate row in the centre display in order to open the con-trols for seat and steering wheel. If the car is not equipped with heated seats or heated steering wheel, the button for ven-tilated seats is immediately available in theclimate row.
2. Repeatedly press the button for ventilated seats in order to change between the four levels:
Off, High, Medium and Low.
> The level changes and the button shows the set level.
NOTE
The seat ventilation should be used carefully by people sensitive to draughts. Level Low is
recommended for long-term use.
IMPORTANT
Seat ventilation cannot be started if the pas- senger compartment temperature is too low.This is in order to avoid cooling down the per-son sitting in the seat.
Related information
• Climate controls (p. 186)
• Climate controls in the centre display (p. 187)
Activating/deactivating heating of steering wheel
*
The steering wheel can be heated in order to increase comfort for the driver when it is cold.
Activating/deactivating heating of
steering wheel
Steering wheel and seat buttons in the climate row.
1. Press the driver's side steering wheel and seat button in the climate row of the centre display in order to open the controls for seatand steering wheel. If the car is not equipped with heated seats or ventilated seats, the button for heatedsteering wheel is immediately available in theclimate row.
||
LOADING AND STORAGE
* Option/accessory.
226
Using the glovebox as a cooled area *The glovebox can be used for cooling of e.g. drinks or food. The cooling works when the cli-mate control system is active (i.e. when the car is set in ignition position II or when the engine is
running).
Cooling activated
Cooling deactivated
–Activate/deactivate the cooling by moving the control to the end position toward thepassenger compartment/glovebox.
Related information
• Passenger compartment interior (p. 218)
• Using private locking (p. 249)
Sun visors The rear of each sun visor includes a vanity mir- ror with card holder.
Vanity mirror with lighting plus card holder.
The vanity mirror lighting
* is switched on auto-
matically when the lid is lifted. The vanity mirror frame incorporates a holder for e.g. cards or tickets.
Related information
• Passenger compartment interior (p. 218)
Cargo area
The car has a flexible cargo area that makes it possible to transport and secure large objects.
By folding down the backrests in the rear seat, the cargo area can become quite spacious. Useload retaining eyelets or bag holders to secure the load, and the extendable cargo cover * to con-
ceal the load if desired. The warning triangle and first-aid kit are also stored in the cargo area. The car's towing eye and puncture repair kit or spare wheel * are stored under the cargo area
floor.
Related information
• Through-load hatch in the rear seat (p. 229)
• Lowering the backrests in the rear seat (p. 130)
• Loading (p. 227)
• Tool kit (p. 500)
||
STARTING AND DRIVING
414
IMPORTANT
Engine damage can occur if water enters the air filter. In depths greater than 25 cm, water could enter the transmission. This reduces the lubri-cating ability of the oils and shortens theservice life of these systems. Damage to any component, engine, transmis- sion, turbocharger, differential or its internalcomponents caused by flooding, hydrostaticlocking or oil shortage, is not covered by thewarranty. In the event of the engine stalling in water, do not try restart - tow the car from the water toa workshop - an authorised Volvo workshop isrecommended. Risk of engine breakdown.
Related information
•Towing (p. 431)
• Recovering the car (p. 432)
Overheating in the engine and drive system
Under special conditions, for example hard driv- ing in hilly terrain and hot climate, there is a riskthat the engine and drive system may overheat -in particular with a heavy load.
• In the event of overheating, the engine's power may be limited temporarily.
• Remove any auxiliary lamps from in front ofthe grille when driving in hot climates.
• If the temperature in the engine's coolingsystem becomes too high then a warningsymbol is illuminated and the driver display shows the message
Engine temperature
High temperature Stop safely. Stop the
car in a safe way and allow the engine to run at idling speed for several minutes and cooldown.
• If the message
Engine temperature High
temperature Turn off engine or Engine
coolant Level low, turn off engine is
shown, stop the car and switch off the engine.
• In the event of overheating in the gearbox, analternative gear shift program will beselected. In addition, a built-in protectionfunction is activated that, amongst otherthings, illuminates a warning symbol and thedriver display shows the message
Transmission warm Reduce speed to
lower temperature or Transmission hot Stop safely, wait for cooling
. Follow the
recommendation given, reduce speed or stop the car in a safe way and allow the engine torun at idling speed for several minutes toenable the gearbox to cool down.
• If the car overheats, the air conditioning maybe switched off temporarily.
• Do not turn the engine off immediately youstop after a hard drive.
NOTE
It is normal for the engine's cooling fan to operate for a time after the engine has beenswitched off.
Symbols in the driver display
Symbol
Specification
High engine temperature. Follow the recommendation given.
Low level, coolant. Follow the rec- ommendation given.
Gearbox hot/overheated/cooled. Follow the recommendation given.
MAINTENANCE AND SERVICE
519
Coolant expansion tank, right-hand drive car.
Grip the hatch's handle and lift/jiggle the hatch from the plastic cover.
Screw off the cap on the expansion tank and top up with coolant. The coolant level must not exceed the yellow MAX mark inside the
expansion tank.
Reinstall the parts in reverse order. If there is coolant under the car, if there is cool- ant smoke, or if more than 2 litres have beenfilled, always call for recovery to avoid the risk ofengine damage due to a defective cooling sys-tem when attempting to start the car.
IMPORTANT
• A high content of chlorine, chlorides and other salts may cause corrosion in thecooling system.
• Always use coolant with anti-corrosionagent as recommended by Volvo.
• Ensure that the coolant mixture is 50%water and 50% coolant.
• Mix the coolant with approved quality tapwater. In the event of any doubt aboutwater quality, used ready-mixed coolant inaccordance with Volvo recommendations.
• When changing coolant/replacing cool-ing system components, flush the coolingsystem clean with approved quality tapwater or flush with ready-mixed coolant.
• The engine must only be run with a well-filled cooling system. Otherwise, tempera-tures that are too high may occur result-ing in the risk of damage (cracks) in thecylinder head.
Related information
•
Coolant — specifications (p. 570)