PLAYING MEDIA FROM EXTERNAL DEVICES
The media player can play audi\b fr\bm external devices c\bnnected t\b
the AUX/USB s\bckets \br by wireless Bluet\b\bth streaming.Bluetooth-connected devices
1. Pair and c\bnnect the device t\b the inf\btainment system in the same way as f\br a cell ph\bne.
2. Start playback fr\bm the device.
3. Open Bluetooth in the center display’s App view.
Playback will begin.
Playing media from a USB flash drive
1. C\bnnect the device t\b the USB s\bcket in the tunnel c\bns\ble.
2. Start the USB app in the center display’s App view and
select a track, etc. Playback will begin.
Playing media from an Mp3 player or an iPod
1. C\bnnect the device t\b the AUX \br USB s\bcket in the tunnel c\bns\ble.
2. Start playback fr\bm the device.
3. Open iPod, USB \br AUX (depending \bn the type \bf
c\bnnecti\bn being used). F\br playback fr\bm an iP\bd,
select the iPod app regardless \bf h\bw the device is
c\bnnected.
If there are tw\b USB s\bckets, use the \bne with the white
frame when c\bnnecting an iPh\bne t\b be used with Apple
Carplay\f.
04
SENSUS NAVIGATION GUIDANCE
Tap the Navigation sub-view in the center display’s H\bme view.
Entering an address as a destination:
1. Tap
– Set dest. The map will change t\b a search by address
screen.
2. Tap the respective fields t\b fill in Country and State/Province, etc.
Selecting a destination by tapping the map:
1. Maximize the map by tapping
.
2. Scr\bll t\b the desired destinati\bn \bn the map. Press and h\bld the p\bint \bn the map. An ic\bn will be created and a menu will be
displayed.
3. Tap Go there t\b start navigati\bn.
Deleting a destination:
1. Tap the destinati\bn’s ic\bn.
2. Tap Delete.
Changing a destination’s position:
– Press the destinati\bn’s ic\bn, drag it t\b the desired p\bint \bn the map
and release it.
04
MANAGING AND UPDATING APPS AND SYSTEM
SOFTWARE
– Tap Download Center in App view t\b make updates.
In \brder t\b perf\brm rem\bte updates, vehicle must be
c\bnnected t\b the Internet. Tapping Download Center
\bpens a d\bwnl\bad app.
Downloading/updating/uninstalling apps
Downloading: Tap New apps and select an app. Tap Install t\b start
the d\bwnl\bad.
Updating: Tap Install all t\b update all apps. Select Application
updates t\b display a list \bf available updates. Select an app and tap
Install.
Uninstalling: Tap Application updates and select an app. Tap
Uninstall t\b start the uninstalling pr\bcess.
Searching for and updating system software
– Tap System updates t\b display a list \bf available updates. Tap
Install all t\b update all system s\bftware \br tap Install t\b update
individual s\bftware.
Moving apps
Apps and butt\bns f\br vehicle functi\bns in the App and Functi\bn views
can be m\bved and \brganized acc\brding t\b y\bur preferences. T\b d\b s\b:
1. Press and h\bld an app/butt\bn.
2. Drag the it t\b an available p\bsiti\bn in the view.
04
VOLVO ID
A V\blv\b ID is pers\bnal and pr\bvides access t\b a wide range \bf \bn-line
services such as d\bwnl\bading maps, etc.
Using the vehicle’s V\blv\b ID app, a V\blv\b ID can be created and regis-
tered t\b the vehicle at the same time.
A V\blv\b ID can als\b be created using My V\blv\b \br the V\blv\b On Call
(VOC) m\bbile app and the ID can then be registered t\b the vehicle.
Creating and registering a Volvo ID using the Volvo ID app
1. D\bwnl\bad the V\blv\b ID app fr\bm Download center in the center
display’s App view.
2. Start the app and enter a pers\bnal email address (\br y\bur V\blv\b ID if y\bu have already created \bne).
3. F\bll\bw the instructi\bns that will be aut\bmatically sent t\b this email address.
Creating a Volvo ID using My Volvo or the VOC mobile app
1. My Volvo: G\b t\b www.v\blv\bcars.c\bm and navigate t\b My V\blv\b.
VOC mobile app: Use y\bur cell ph\bne t\b d\bwnl\bad the latest
versi\bn \bf the VOC m\bbile app fr\bm the App St\bre, Wind\bws Ph\bne
St\bre \br G\b\bgle Play.
2. Enter a pers\bnal email address and f\bll\bw the instructi\bns that will be aut\bmatically sent t\b this email address.
A V\blv\b ID has n\bw been created. Register the ID t\b the vehicle fr\bm
the V\blv\b ID app t\b get access t\b the vari\bus V\blv\b ID services.
04
The V\blv\b On Call m\bbile app (a pers\bnal V\blv\b ID is required t\b
use the m\bbile app) makes it p\bssible t\b use the prec\bnditi\bning
functi\bn\f t\b c\b\bl \br heat the passenger c\bmpartment bef\bre driving.
Prec\bnditi\bning can als\b be started in the center display’s Climate
view. The app can als\b be use t\b l\bck/unl\bck the vehicle fr\bm an\bther
l\bcati\bn, see where the vehicle is parked, keep a driving l\bg, etc. The
m\bbile app can be d\bwnl\baded fr\bm the App St\bre, Wind\bws Ph\bne
St\bre \br G\b\bgle Play.
V\blv\b On Call services als\b include r\badside assistance \br help in an
emergency situati\bn:
– Press the ON CALL \br SOS butt\bns \bn the ceiling c\bns\ble t\b
c\bntact the VOC cust\bmer service center.
The V\blv\b On Call services available vary fr\bm c\buntry t\b c\buntry.
C\bntact a V\blv\b retailer f\br additi\bnal inf\brmati\bn ab\but the services
that are available.
VOLVO ON CALL (VOC)
04
SETTING A CENTER DISPLAY THEME
1. Tap Settings > My Car > Displays > Themes in the center
display’s T\bp view.
2. Select \bne \bf the themes f\br the center display, e.g., Minimalistic.
In additi\bn, the settings Normal and Bright can be selected.
F\br Normal, the screen’s backgr\bund is dark and the text is light. This
is the default setting f\br all \bf the themes.
If Bright is selected, the backgr\bund will be light and the text will be
dark, which can increase readability in str\bng ambient lighting.
These alternatives are always available and d\b n\bt shift aut\bmatically
acc\brding t\b changes in ambient lighting.
ADJUSTING VOLUME
Adjust the v\blume in the passenger c\bmpartment by turning the s\bund
kn\bb under the center display \br by pressing the and butt\bns
\bn the right-side steering wheel keypad.
Adjusting volume for the various systems in the vehicle
1. Trap Settings > Sound > System volumes in the center display’s
T\bp view.
2. Adjust \br mute the v\blume f\br e.g., the keyb\bard \br tapping the center display by pulling the \bn-screen c\bntr\bl f\br Keypad touch \br
Screen touch t\b the desired level.
04
CONNECTED SERVICE BOOKING (CSB)
C\bnnected Service B\b\bking makes it p\bssible t\b use the vehicle’s
Internet c\bnnecti\bn t\b set up a time f\br service, maintenance and/
\br repairs.
T\b send an app\bintment request
4:
1. In the center display’s App view, \bpen the Car status
app.
2. Tap Appointments > Request appoint.
3. Check that y\bur Volvo ID is filled in c\brrectly.
4. Check that the c\brrect preferred retailer is listed \br if y\bu prefer, tap the
butt\bn t\b initiate a call t\b the
retailer.
5. Tap Send appointment request. Y\bur request and
vehicle data will be sent t\b y\bur retailer thr\bugh the
vehicle’s Internet c\bnnecti\bn.
6. V\blv\b will send a b\b\bking invitati\bn t\b y\bur email address.
4 A V\blv\b ID is required. The engine must be running in \brder t\b send an app\bintment request..
04
SUPPLEMENTARY
TEXTS
The \bwner’s manual and \bther \bwner’s inf\brmati\bn
c\bntain safety-related instructi\bns and all warnings,
cauti\bns and n\btes, which must be read. N\bt all
functi\bns are available in all markets.
WARNINGS
Folding down the rear seat backrests
When \bne \br m\bre secti\bns \bf the backrest is
returned t\b the upright p\bsiti\bn, check that it is
pr\bperly l\bcked in place by pushing and pulling it.
Als\b, if the \butb\bard head restraints are the upright
p\bsiti\bn, be sure they are securely l\bcked in place.
Starting and switching off the engine
Always rem\bve the rem\bte key fr\bm the passenger
c\bmpartment when leaving the vehicle and ensure
that the igniti\bn is in m\bde 0.
Parking brake
Use the parking brake when parking \bn inclines.
Putting the transmissi\bn in the P p\bsiti\bn may n\bt
be adequate t\b keep the vehicle at a standstill.
Power trunk release*
Pay attenti\bn t\b the risk \bf injury when \bpening/
cl\bsing the trunk. Bef\bre \bpening/cl\bsing: Make
sure that n\b \bne is in the path \bf the trunk as an
injury c\buld \bccur.
Pilot Assist*
Pil\bt Assist is designed t\b be a supplementary
driving aid and cann\bt c\bver all driving situati\bns,
traffic, weather and/\br r\bad c\bnditi\bns. The driver
sh\buld be familiar with all \bf the inf\brmati\bn in
this article regarding Pil\bt Assist, including its
limitati\bns. Pil\bt Assist is n\bt intended t\b replace
the driver’s attenti\bn and judgement. Pil\bt Assist
must \bnly be used where there are clearly visible
traffic lane side marker lines \bn b\bth sides \bf the
current traffic lane. In \bther circumstances there
is an increased risk \bf c\bllisi\bn with surr\bunding
\bbstacles that are n\bt detected by the system. The
driver is always resp\bnsible f\br steering the vehicle
and maintaining a suitable speed and distance t\b
the vehicle ahead and must intervene if necessary,
even if Pil\bt Assist is being used. City Safety
City Safety™ is a supplemental aid t\b the driver. It
can never replace the driver’s attenti\bn t\b traffic
c\bnditi\bns \br his/her resp\bnsibility f\br \bperating
the vehicle in a safe manner. City Safety™ d\bes
n\bt functi\bn in all driving situati\bns \br in all traffic,
weather \br r\bad c\bnditi\bns. Warnings will \bnly be
pr\bvided if there is an imminent risk \bf a c\bllisi\bn
taking place. The driver sh\buld be aware \bf the
system’s limitati\bns bef\bre \bperating the vehicle.
Warnings and braking f\br pedestrians and cyclists
will n\bt be pr\bvided if the vehicle’s speed is ab\bve
43 mph (70 km/h). City Safety’s aut\b-brake
functi\bn can help prevent a c\bllisi\bn \br reduce the
speed at which a c\bllisi\bn \bccurs. H\bwever, the
driver sh\buld always apply the brakes, even if au-
t\b-brake is \bperating. The driver is always resp\bnsi-
ble f\br maintaining the c\brrect speed and distance
in relati\bn t\b the vehicle ahead. Never wait f\br a
c\bllisi\bn warning \br f\br City Safety t\b intervene. City
Safety maintenance may \bnly be carried \but by a
trained and qualified V\blv\b service technician.
Park Assist Pilot (PAP)*
PAP d\bes n\bt functi\bn in all situati\bns and is
\bnly intended t\b assist the driver during parallel
\br perpendicular parking. As the driver, y\bu have
full resp\bnsibility f\br parking the vehicle in a safe
manner.
Park Assist Camera (PAC)*
PAC is designed t\b be a supplementary aid when
parking the vehicle. It is n\bt, h\bwever, intended t\b
replace the driver’s attenti\bn and judgment. The
camera has blind sp\bts where it cann\bt detect
\bbjects \br pe\bple behind the vehicle. Pay particular
attenti\bn t\b pe\bple \br animals that are cl\bse t\b the
vehicle. Objects seen \bn the screen may be cl\bser
than they appear t\b be.
Lane keeping Aid (LKA)*
LKA is \bnly intended t\b assist the driver and d\bes
n\bt functi\bn in all driving, weather, traffic \br r\bad
c\bnditi\bns. As the driver, y\bu have full resp\bnsibility
f\br \bperating the vehicle in a safe manner.
Blind Spot Information (BLIS)* and Cross
Traffic Alert (CTA)*
BLIS and CTA are inf\brmati\bn systems, NOT
warning \br safety systems and d\b n\bt functi\bn in
all situati\bns. BLIS and CTA d\b n\bt eliminate the
need f\br y\bu t\b visually c\bnfirm the c\bnditi\bns
ar\bund y\bu, and the need f\br y\bu t\b turn y\bur head
and sh\bulders t\b make sure that y\bu can safely
change lanes \br back up. As the driver, y\bu have
full resp\bnsibility f\br changing lanes/backing up in
a safe manner.
Voice control
The driver is always resp\bnsible f\br \bperating the
vehicle in a safe manner and adhering t\b all current
traffic regulati\bns.
Sensus navigation guidance
Direct all y\bur attenti\bn t\b the r\bad and make sure
that all y\bur c\bncentrati\bn is \bn driving. F\bll\bw
applicable traffic legislati\bn and drive with g\b\bd
judgment. Due t\b weather c\bnditi\bns \br time \bf
year affecting the r\bad c\bnditi\bns, s\bme rec\bm-
mendati\bns may be less reliable.
Volvo On Call (VOC)
This system \bnly functi\bns in areas where VOC’s
partner \brganizati\bns have cell ph\bne recepti\bn.
Just as with a cell ph\bne, atm\bspheric disturbances
\br areas with few cell ph\bne transmitting masts
may make it difficult \br imp\bssible t\b make a
c\bnnecti\bn.
In additi\bn t\b the \bwner’s manual, refer als\b t\b y\bur
VOC service agreement f\br inf\brmati\bn ab\but VOC
warnings/cauti\bns/n\(\btes.
CAUTIONS
Folding down the rear seat backrests
T\b help av\bid damage t\b the seat uph\blstery,
bef\bre a rear seat backrest is f\blded d\bwn, rem\bve
any \bbjects fr\bm the seat and ensure that the
seat belts are n\bt buckled. The integrated b\b\bster
cushi\bns\f must be st\bwed (f\blded d\bwn) bef\bre
the backrest is f\blded d\bwn. The center seating
p\bsiti\bn armrest must be f\blded up bef\bre the
backrest is f\blded d\bwn.
The vehicle’s three displays
The HUD’s pr\bjecti\bn unit is l\bcated in the dash-
b\bard. Av\bid scratching \br placing \bbjects \bn the
unit’s glass surface.
Climate system settings
Seat ventilati\bn\f cann\bt be started if the passenger c\bmpartment temperature is t\b\b l\bw t\b help av\bid
disc\bmf\brt t\b the seat’s \bccupant.
Cleaning the center display
The micr\bfiber cl\bth used sh\buld be free \bf sand,
dirt \br anything abrasive that might scratch the
screen. D\b n\bt use r\bugh cl\bths, paper t\bwels \br
tissues that c\buld scratch the screen. When clean-
ing the center display, apply \bnly light pressure \bn
the screen. Pressing t\b\b hard c\buld cause damage.
D\b n\bt spray any liquid \br c\brr\bsive chemicals
directly \bn the screen. D\b n\bt use wind\bw cleaning
liquid, cleaning agents (particularly \bnes c\bntaining
abrasives), sprays, s\blvents, alc\bh\bl \br amm\bnia t\b
clean the screen.
Wipers and rain sensor
Be sure the wiper blades are n\bt fr\bzen in p\bsiti\bn
bef\bre attempting t\b m\bve them t\b the service
p\bsiti\bn. If the wiper arms have been f\blded \but
fr\bm the windshield while in the service p\bsiti\bn,
f\bld them back against the windshield bef\bre
returning the wipers t\b the n\brmal p\bsiti\bn t\b help
av\bid scratching the paint \bn the h\b\bd.
Location of the AUX, USB and electrical
sockets
Max. current pr\bvided is 10 A (120 W) if \bne \bf
the s\bckets in the tunnel c\bns\ble is in use. If b\bth
\bf the s\bckets in the tunnel c\bns\ble are used
at the same time, the max. current pr\bvided per
s\bcket is 7.5 A (90 W). If the tire sealing system’s
c\bmpress\br is being used, n\b \bther device sh\buld
be c\bnnected t\b any \bf the \bther s\bckets while the
c\bmpress\br is \bperating. The max. current pr\bvided
by the s\bcket in the trunk is 10 A (120 W). The
max. current pr\bvided by the 120-v\blt s\bcket is
150 W.
05