2017 VOLVO S90 engine

01. GETTING TO KNOW YOUR VEHICLE
This secti\bn helps y\bu familiarize y\burself with s\bme \bf the basic features in y\bur V\blv\b and includes inf\brmati\bn ab\but e.g.,
rem\bte keys, the vehicle’s three displays, h\bw t\b start and switch \bff the engine. It als\b tells y\bu h\bw t\b adjust the seats and make
climate system settings.
02. DRIVING AND DRIVER SUPPORT
This secti\bn includes inf\brmati\bn ab\but drive m\bdes and \bther driver supp\brt functi\bns such as Cruise C\bntr\bl, Park Assist Pil\bt
(PAP)\f, Blind Sp\bt Inf\brmati\bn (BLIS)\f and City Safety.
03. INSTRUMENTS AND CONTROLS
This secti\bn explains e.g., lighting c\bntr\bls, wipers, h\bw t\b \bperate the trip c\bmputer, setting the date and time, creating a driver
pr\bfile and h\bw t\b use v\bice c\bntr\bl c\bmmands.
04. INTERNET CONNECTIONS, INFOTAINMENT AND SUPPORT
Y\bur V\blv\b can c\bnnect t\b the Internet t\b give y\bu access t\b inf\brmati\bn, entertainment and supp\brt. This secti\bn pr\bvides instruc-
ti\bns f\br e.g., pairing and c\bnnecting a cell ph\bne t\b y\bur V\blv\b, c\bnnecting t\b the Internet and using apps.
05. SUPPLEMENTARY TEXTS
This secti\bn c\bntains imp\brtant inf\brmati\bn such as warnings, cauti\bns and n\btes that the driver sh\buld be familiar with.
CONTENTS

STARTING AND SWITCHING OFF THE ENGINE
Switch \bn the iginti\bn \br start the engine using the start kn\bb l\bcated
behind the gear select\br. The rem\bte key \bnly has t\b be in the fr\bnt
secti\bn \bf the passenger c\bmpartment.
If the vehicle is equipped with the \bpti\bnal Passive Entry system, the
rem\bte key can be anywhere in the vehicle.
Start
1. The gear select\br must be in the P \br N p\bsiti\bn.
2. Press the brake pedal.
3. Turn the start kn\bb t\bward START and release it.
Switch off
1. Put the gear select\br in p\bsiti\bn P.
2. Turn the start kn\bb t\bward STOP and release it.
01

PARKING BRAKE
Setting
– Pull up the parking brake c\bntr\bl in the center c\bns\ble.
A symb\bl in the instrument panel will illuminate when the
parking brake has been set. Check that the vehicle is
stati\bnary.
Manual release
1. Press the brake pedal.
2. Press the parking brake c\bntr\bl d\bwn.
Automatic release
1. Buckle y\bur seat belt and start the engine.
2. M\bve the gear select\br t\b D \br R and press the accelerat\br
pedal.
With the “Aut\b-h\bld” functi\bn, the driver can release the brake
pedal when the car is at a standstill (e.g., at a traffic light) and
the brakes will remain applied. The brakes will release when
the accelerat\br pedal is pressed.
– Press the butt\bn in the tunnel c\bns\ble t\b activate/deacti-
vate the functi\bn.
Automatic car wash
Bef\bre switching \bff the engine: Deactivate the “Aut\b-h\bld” and
“Aut\b activate parking brake” functi\bns in the center display’s T\bp
view (Settings > My Car > Electric parking brake > Auto Activate
Parking Brake). Put the gear select\br in p\bsiti\bn N.
Turn and h\bld the start kn\bb t\bward STOP f\br at least 4 sec\bnds.
01

DRIVE MODES\f
Select a drive m\bde best suited t\b the current driving c\bnditi\bns. N\bt
all drive m\bdes can be selected in every situati\bn.
1. Press the DRIVE MODE c\bntr\bl in the tunnel c\bns\ble. A p\bp-up
wind\bw will \bpen in the center display.
2. R\bll the c\bntr\bl up/d\bwn until the desired m\bde is highlighted in the center display.
3. Press the c\bntr\bl t\b select. The drive m\bde can als\b be selected by tapping it in the center display.
Drive modes
Comfort: the default m\bde when the engine is started.
Eco: f\br energy efficient driving. This m\bde can als\b be selected
directly fr\bm the center display’s Functi\bn view.
Dynamic: sp\brtier characteristics f\br a m\bre active driving style.
Individual: adapt drive m\bdes Comfort, Eco \br Dynamic t\b y\bur
pers\bnal preferences. T\b be accessible, this drive m\bde has t\b first be
activated fr\bm the center display’s T\bp view, under Settings > My Car
> Individual Drive Mode.
02

START/STOP FUNCTION
This functi\bn temp\brarily turns \bff the engine when the vehicle is at
a standstill and restarts it as s\b\bn as driving resumes. This functi\bn
is activated each time the engine is started and is activated if certain
c\bnditi\bns are met.
Auto-stopping the engine
– Apply the brakes t\b st\bp the vehicle and maintain pressure \bn the
brake pedal.
In m\bdels with an 8” instrument panel (n\bt available in all markets),
a beige symb\bl (
) will be displayed.
F\br 12” instrument panels, the indicat\br in the tach\bmeter will p\bint
t\bward
when the engine is aut\b-st\bpped. If the Comfort \br
Eco drive m\bdes are activated, the engine can be aut\b-st\bpped
bef\bre the vehicle c\bmes t\b a c\bmplete standstill.
Alternatives for auto-starting the engine
– Release the brake pedal. If aut\b-h\bld is activated, press the accel-
erat\br pedal.

– Retain pressure \bn the brake pedal and press the accelerat\br pedal.

– On d\bwnsl\bpes: Release the brake pedal and let the vehicle begin
t\b r\bll. The engine will aut\b-start after a slight increase in speed.

– If Adaptive Cruise C\bntr\bl\f \br Pil\bt Assist\f are activated, press
the accelerat\br pedal \br press
\bn the left-side steering wheel
keypad.
Turning off the function

– Tap the Start/Stop butt\bn in the center display’s
Functi\bn view t\b turn it \bff. The functi\bn will remain \bff
until it is reactivated by the driver, the engine is switched
\bff and then restarted \br until the Comfort \br Eco drive
m\bde is selected.
02

DRIVER SUPPORT SYSTEMS
City Safety
City Safety alerts the driver \bf \bbstructi\bns using visual and
audible signals. The brakes will be applied aut\bmatically if
the driver d\bes n\bt react in time. City Safety can e.g., help
prevent a c\bllisi\bn and assist the driver if there is a risk \bf
c\blliding with an\bther vehicle, a large animal, a pedestrian
\br a cyclist. City Safety is activated aut\bmatically when the
engine is started.
Park Assist Pilot (PAP)*
PAP assists in parking \br leaving a parking space by
e.g., scanning a p\btential parking space and thereafter
c\bntr\blling the steering wheel t\b guide the vehicle. The
driver’s task is t\b check the area ar\bund the vehicle, f\bll\bw
the instructi\bns in the center display, select the appr\bpriate
gear, c\bntr\bl the vehicle’s speed, and brake and st\bp the
vehicle.
Parking
1. Tap Park in in the center display’s Functi\bn view. The
vehicle’s speed may n\bt exceed 20 mph (30 km/h)
during parallel parking \br 12 mph (20 km/h) f\br perpen-
dicular parking. The distance between the vehicle and
the parking space must be 1.6–5 ft (0.5–1.5 m).
2. Be prepared t\b st\bp the vehicle when pr\bmpted by a graphic and text in the center display when a suitable
parking space has been detected. A p\bp-up wind\bw will
appear.
3. Select Parallel parking \br Perpendicular parking in
the p\bp-up wind\bw and put the gear select\br in R.
4. F\bll\bw the instructi\bns \bn the center display and be prepared t\b st\bp the vehicle when pr\bmpted t\b d\b s\b.
02

Leaving a parking space
This functi\bn can \bnly be used f\br parallel parking.
1. Tap Park out in Functi\bn view.
2. F\bll\bw the instructi\bns \bn the center display.
Park Assist Camera*
This camera helps the driver see what is ar\bund the vehicle
and t\b indicate p\btential \bbstructi\bns using a camera
image and graphics in the center display. The camera view
and guiding lines are selected in the center display. The
camera starts aut\bmatically when the gear select\br is in
R. This setting is made in the center display’s T\bp view in
Settings, My Car > Park Assist > Auto Camera Reverse
Activation.
The camera can als\b be started manually by tapping the
Camera butt\bn in Functi\bn view t\b activate/deactivate.
Lane Keeping Aid (LKA)*
If the vehicle is ab\but t\b inadvertently cr\bss a driving lane’s
marker lines, LKA will actively guide the vehicle back int\b
the lane thr\bugh slight f\brce \bn the steering wheel. When
the vehicle reaches \br cr\bsses a line, the driver will als\b
be alerted by an audible signal \br vibrati\bns in the steering
wheel.

– Tap the Lane Keeping Aid butt\bn in Functi\bn view t\b
activate/deactivate.\(
LKA settings can be made in the center display’s T\bp
view under Settings. Select My Car > IntelliSafe > Lane
Keeping Aid. Select e.g., Sound under Lane Keeping Aid
Warning Feedback. If the vehicle is equipped with the \bpti\bnal Run-\bff
Mitigati\bn system, additi\bnal supp\brt can be pr\bvided if
it is ab\but t\b g\b \bff the r\bad. Brake and steering supp\brt
will be pr\bvided aut\bmatically. T\b activate, select
My Car >
IntelliSafe > Lane Keeping Aid and tap the Assistance
in case of road departure b\bx.
Blind Spot Information (BLIS)*
BLIS inf\brms the driver \bf vehicles in the d\b\br mirr\brs’ blind
angles \br \bf rapidly appr\baching vehicles in the driving
lanes t\b the right and/\br left \bf y\bur vehicle..

– Tap the BLIS butt\bn in the center display’s Functi\bn
view t\b activate/deactivate.\(
Cross Traffic Alert (CTA)*
CTA alerts the driver t\b cr\bssing traffic behind y\bur vehicle
when backing up \br if reverse gear is selected. CTA is acti-
vated aut\bmatically when the engine is started.

– Tap the Cross Traffic Alert butt\bn in the center
display’s Functi\bn view t\b activate/deactivate.\(
02

CONNECTED SERVICE BOOKING (CSB)
C\bnnected Service B\b\bking makes it p\bssible t\b use the vehicle’s
Internet c\bnnecti\bn t\b set up a time f\br service, maintenance and/
\br repairs.
T\b send an app\bintment request
4:
1. In the center display’s App view, \bpen the Car status
app.
2. Tap Appointments > Request appoint.
3. Check that y\bur Volvo ID is filled in c\brrectly.
4. Check that the c\brrect preferred retailer is listed \br if y\bu prefer, tap the
butt\bn t\b initiate a call t\b the
retailer.
5. Tap Send appointment request. Y\bur request and
vehicle data will be sent t\b y\bur retailer thr\bugh the
vehicle’s Internet c\bnnecti\bn.
6. V\blv\b will send a b\b\bking invitati\bn t\b y\bur email address.
4 A V\blv\b ID is required. The engine must be running in \brder t\b send an app\bintment request..
04