2017 TOYOTA COROLLA iM Owners Manual

3458-1. Specifications
8
Vehicle specifications
COROLLA iM_U (OM12K64U)
Bias ply tire
A pneumatic tire in which the ply cords that
extend to the beads are laid at alternate
angles substantially less than 90 degrees to
the centerline of the tread
CarcassThe tire structure, except tread and sidewall
rubber which, when inflated, bears the load
ChunkingThe breaking away of pieces of the tread or
sidewall
CordThe strands forming the plies in the tire
Cord separationThe parting of cords from adjacent rubber
compounds
CrackingAny parting within the tread, sidewall, or inner-
liner of the tire extending to cord material
CT
A pneumatic tire with an inverted flange tire
and rim system in which the rim is designed
with rim flanges pointed radially inward and
the tire is designed to fit on the underside of
the rim in a manner that encloses the rim
flanges inside the air cavity of the tire
Extra load tire
A tire designed to operate at higher loads and
at higher inflation pressures than the corre-
sponding standard tire
GrooveThe space between two adjacent tread ribs
Innerliner
The layer(s) forming the inside surface of a
tubeless tire that contains the inflating medium
within the tire
Innerliner separationThe parting of the innerliner from cord material
in the carcass
Intended outboard
sidewall
(a) The sidewall that contains a whitewall,
bears white lettering, or bears manufac-
turer, brand, and/or model name molding
that is higher or deeper than the same
molding on the other sidewall of the tire, or
(b) The outward facing sidewall of an asym-
metrical tire that has a particular side that
must always face outward when mounted
on a vehicle
Tire related termMeaning

3468-1. Specifications
COROLLA iM_U (OM12K64U)
Light truck (LT) tire
A tire designated by its manufacturer as pri-
marily intended for use on lightweight trucks
or multipurpose passenger vehicles
Load ratingThe maximum load that a tire is rated to carry
for a given inflation pressure
Maximum load ratingThe load rating for a tire at the maximum per-
missible inflation pressure for that tire
Maximum permissible
inflation pressureThe maximum cold inflation pressure to which
a tire may be inflated
Measuring rimThe rim on which a tire is fitted for physical
dimension requirements
Open spliceAny parting at any junction of tread, sidewall,
or innerliner that extends to cord material
Outer diameterThe overall diameter of an inflated new tire
Overall width
The linear distance between the exteriors of
the sidewalls of an inflated tire, including ele-
vations due to labeling, decorations, or protec-
tive bands or ribs
Passenger car tire
A tire intended for use on passenger cars,
multipurpose passenger vehicles, and trucks,
that have a gross vehicle weight rating
(GVWR) of 10,000 lb. or less.
PlyA layer of rubber-coated parallel cords
Ply separationA parting of rubber compound between adja-
cent plies
Pneumatic tire
A mechanical device made of rubber, chemi-
cals, fabric and steel or other materials, that,
when mounted on an automotive wheel, pro-
vides the traction and contains the gas or fluid
that sustains the load
Radial ply tire
A pneumatic tire in which the ply cords that
extend to the beads are laid at substantially 90
degrees to the centerline of the tread
Reinforced tire
A tire designed to operate at higher loads and
at higher inflation pressures than the corre-
sponding standard tire
Tire related termMeaning

3478-1. Specifications
8
Vehicle specifications
COROLLA iM_U (OM12K64U)
*: Table 1 ⎯ Occupant loading and distribution for vehicle normal load for
various designated seating capacities
Section width
The linear distance between the exteriors of
the sidewalls of an inflated tire, excluding ele-
vations due to labeling, decoration, or protec-
tive bands
SidewallThat portion of a tire between the tread and
bead
Sidewall separationThe parting of the rubber compound from the
cord material in the sidewall
Snow tire
A tire that attains a traction index equal to or
greater than 110, compared to the ASTM E-
1136 Standard Reference Test Tire, when
using the snow traction test as described in
ASTM F-1805-00, Standard Test Method for
Single Wheel Driving Traction in a Straight
Line on Snow-and Ice-Covered Surfaces, and
which is marked with an Alpine Symbol ( )
on at least one sidewall
Test rim
The rim on which a tire is fitted for testing, and
may be any rim listed as appropriate for use
with that tire
TreadThat portion of a tire that comes into contact
with the road
Tread ribA tread section running circumferentially
around a tire
Tread separationPulling away of the tread from the tire carcass
Treadwear indicators
(TWI)The projections within the principal grooves
designed to give a visual indication of the
degrees of wear of the tread
Wheel-holding fixtureThe fixture used to hold the wheel and tire
assembly securely during testing
Tire related termMeaning

3488-1. Specifications
COROLLA iM_U (OM12K64U)
Designated seating
capacity, Number of
occupantsVehicle normal load,
Number of occupantsOccupant distribution
in a normally loaded
vehicle
2 through 422 in front
5 through 1032 in front, 1 in second
seat
11 through 155
2 in front, 1 in second
seat, 1 in third seat, 1
in fourth seat
16 through 207
2 in front, 2 in second
seat, 2 in third seat, 1
in fourth seat

349
8
Vehicle specifications
COROLLA iM_U (OM12K64U)
8-2. Customization
→P. 7 8
Some function settings are changed simultaneously with other func-
tions when customized. Contact your Toyota dealer for further details.
Settings that can be changed using the meter control switches
Settings that can be changed by your Toyota dealer
Definition of symbols: O = Available, — = Not available
Customizable features
Your vehicle includes a variety of electronic features that can be
personalized to suit your preferences. The settings of these fea-
tures can be changed using the meter control switches or at
your Toyota dealer.
Customizing vehicle features using the meter control switches
Customizable features
1
2

3508-2. Customization
COROLLA iM_U (OM12K64U)■
Gauges, meters and multi-information display (→P. 74, 76)
*1: For details about each function: →P. 8 0
*2: If equipped
*3: The default setting varies according to country.
*4: 2 of the following items: current fuel consumption, average fuel economy
(after reset), average fuel economy (after start), average fuel economy
(after refuel), average vehicle speed (after reset), average vehicle speed
(after start), elapsed time (after reset), elapsed time (after start), distance
(driving range), distance (after start), blank.
■
Door lock (→P. 8 8 )
Function*1Default settingCustomized set-
ting
Eco Driving Indicator
Light
*2On (Self-lighting)OffO—
LanguageEnglishFrenchO—
Units*3miles (MPG US)km (L/100 km)O—km (km/L)
Drive information 1
Current fuel con-
sumption
*4O—Average fuel
economy (after
reset)
Drive information 2
Distance (driving
range)
*4O—Average vehicle
speed (after reset)
12
FunctionDefault settingCustomized set-
ting
Unlocking using a key
Driver’s door
unlocked in one
step, all doors
unlocked in two
steps
All doors unlocked
in one step—O
12

3518-2. Customization
8
Vehicle specifications
COROLLA iM_U (OM12K64U)■
Wireless remote control (→P. 84, 88)
■Turn signal lever (→P. 139)
FunctionDefault settingCustomized set-
ting
Wireless remote controlOnOff—O
Unlocking operation
Driver’s door
unlocked in one
step, all doors
unlocked in two
steps
All doors unlocked
in one step—O
Operation buzzer volume7Off—O1 to 6
Operation signal (emer-
gency flashers)OnOff—O
Time elapsed before auto-
matic door lock function is
activated if door is not
opened after being
unlocked
60 seconds
Off
—O30 seconds
120 seconds
Open door warning buzzer
(when locking the vehicle)OnOff—O
Alarm (panic mode)OnOff—O
12
FunctionDefault settingCustomized set-
ting
The number of times the
turn signal lights flash
automatically when the
turn signal lever is moved
to the first position during
a lane change
3
4 to 7
—O
Off
12

3528-2. Customization
COROLLA iM_U (OM12K64U)■
Automatic light control system (→P. 141)
■Lights (→P. 141)
■LDA (Lane Departure Alert)* (→P. 176)
*: If equipped
■
Automatic air conditioning system (→P. 196)
■Illumination (→P. 203)
FunctionDefault settingCustomized set-
ting
Light sensor sensitivity Standard -2 to 2—O
Time elapsed before
headlights automatically
turn off after doors are
closed
30 seconds
Off
—O60 seconds
90 seconds
12
FunctionDefault settingCustomized set-
ting
Daytime running light sys-
tem (except Canada)OnOff—O
12
FunctionDefault settingCustomized set-
ting
LDA warning sensitivityHighNormalO—
12
FunctionDefault settingCustomized set-
ting
A/C auto switch operationOnOff—O
12
FunctionDefault settingCustomized set-
ting
Time elapsed before the
interior lights turn off15 seconds7.5 seconds—O30 seconds
Operation after the engine
switch is turned offOnOff—O
Operation when the doors
are unlockedOnOff—O
12