2017 PEUGEOT 4008 audio

02
316
4008_en_Chap10d_Mitsu4_ed01-2016
STEERING MOUNTED CONTROLS
Increase / reduce audio volume.Search for a higher / lower radio frequency.
Next / previous CD track.
CD fast forwards / backwards.
Long press: audio system on / off.
Short press: selection of the source in the
following order: FM1 / FM2 / FM3 / MW /
LW / CD.

03
317
4008_en_Chap10d_Mitsu4_ed01-2016
GENERAL OPERATION
Press the PWR/VOL button.
t

he last source selected before
switching off resumes operation.
t

he audio system functions can be
used when the ignition switch is in the
"ON" or "ACC" position.
to switch of

f, press the PWR/VOL
button again.
Adjusting the volume
turn the

PWR/VOL knob to the left to
decrease the volume or to the right to
increase it. Press the SEL knob repeatedly;
the
audio mode changes in the
following order: BASS /
t

R e BL e /
FAD
e R / BALANC e / SCV and cancel.
Setting the audio modes
Switching on / off
t

he audio adjustment mode is deactivated, during operation of the
radio or a CD or after around 10 seconds with no action. Adjusting the audio modes
turn the

SEL knob to the left or right
to adjust the audio setting.

04
325
4008_en_Chap10d_Mitsu4_ed01-2016
DAB (Digital Audio Broadcasting)
Digital radio
Press the RADIO button repeatedly to
select the waveband; this changes in
the following order: FM1 / FM2 / FM3 /
DAB1 / DAB2 / DAB3 / MW / LW.
Selecting the waveband
Digital radio provides a superior audio quality and also additional
categories of traffic announcements.
t
he different channels offer a choice of radio stations in alphabetical order.
Automatic station search
Manual station search
turn the

SEL thumbwheel respectively
to the left to search for lower
frequencies or to the right to search for
higher frequencies. Press button "7" or "8" respectively
to search for lower or higher
frequencies.
t

he search begins automatically and
stops on the first station found. Press one of the six buttons "1" to "6" until an
audible signal is heard.
t

he sound cuts out, then becomes audible again
after storing.
t

he number of the button and the frequency of the
associated radio station appear on the display. Storing stations
to retrieve the pre-set memory setting, press the button and release
it within two seconds. Y

ou can store up to six stations for each waveband.
e

ach new stored station replaces the previous station.
"DAB" does not have 100% coverage of the country.
When the digital signal is weak, "DAB" allows you to continue
listening to the same station, by automatically switching to the
corresponding analogue "FM" station (if it exists).
RADIO

05
326
4008_en_Chap10d_Mitsu4_ed01-2016
MUSIC MEDIA PLAYERS
this can play audio CDs (CD-DA, CD-text, CD-R/R W)
or MP3 CDs. Ejecting a disc
CD player
Selecting CD mode
If the player already contains a disc,
press the MEDIA button.
"M
e DIA", the track number and the
playing time appear in the screen.
Insert circular compact discs only.
8 cm compact discs must be inserted in the centre of the player slot. After inserting a disc, printed face upwards, the player starts
automatically. Press this button to remove the
disc from the player. t
he system
automatically switches to radio mode.
Once ejected, if the compact disc is not removed within
fifteen
seconds, it is reloaded into the player.

05
327
4008_en_Chap10d_Mitsu4_ed01-2016
MUSIC MEDIA PLAYERS
Random playing of a disc
Press the RDM button to start random
play of the tracks on the disc. "RDM"
appears in the screen.
to exit this mode, press this button
again.
Audio CD
Press and hold the " 7

" or "8" button
to carry out a rewind or fast forward
search respectively.
Play begins when the button is
released.
Fast search
Press the "9" or ":" button to select
the previous or next track respectively.
Selecting a track
Press the RPT button to repeat
the play of the current track. "RP
t
"
appears in the screen.
to exit this mode, press this button
again.
Repeating a track Playing the beginning of each track
Press the

PTY/SCAN button to start
playback of the first ten seconds
of each track on the disc. "SCAN"
appears in the screen and the
corresponding track number flashes.
to exit this mode, press this button
again.
On CD-R/R

Ws, the quality of the playback sound depends on the
encoding software, the burning device and the burning speed used.

05
330
4008_en_Chap10d_Mitsu4_ed01-2016
Press the DISP button for more than
two seconds to activate the ID3 tag
information. "
t
A
g " appears in the
screen.
Press the DISP button repeatedly; the
tag ID3 information appears in the
following order:
ALB

u M NAM e /
t
RACK NAM e /
AR
t

IS t
NAM
e / NORMAL DISPLAY
MOD
e .
to deactivate this information, press
the

DISP button again for more than
two seconds.
If the information exceeds
12 characters, press the PAGE button
to see the rest.
In the absence of MP3 or ID3
tag information to be displayed,
"NO

t I t L e " appears in the screen.
On CD-R/RWs, the quality of the playing sound depends on the
encoding software, the burning device and the burning speed used.
Depending on the flow chart of the MP3 folders and files on the
disc, play may not begin immediately.
MUSIC MEDIA PLAYERS
Using the auxiliary input (AUX)
the auxiliary socket allows the
connection of a portable device
(MP3 player
...).
Connect the portable device (MP3 player…) to the RCA audio
sockets (red and white) using a suitable cable, not supplied.
First adjust the volume on your portable device (to a high level).
t

hen adjust the volume on the audio system.
Operation and play is done using the controls on your portable
device.
Press the MEDIA button for more
than two seconds.
"A
u X" appears in the screen and the
external mode is activated.
Press MEDIA again to deactivate the
AUX mode and change to another
mode.

06
331
4008_en_Chap10d_Mitsu4_ed01-2016
USB PLAYER
Using the USB port
With the vehicle stationary, ignition
switch in the LOCK position, connect
a suitable cable to the portable player.t
he
u
SB port is used to connect a
portable device (MP3 player, Apple®
player, etc.). The files are sent from the
player to your audio system and heard
through the vehicle's speakers.
t

hen connect the cable to the
vehicle's
u SB port.
u

se only
u
SB memory sticks in the format FA
t
32 (File Allocation
table).
File formats: MP3, WMA,

AAC, WAV.
-

Maximum number of levels (including root): 8.
-


Number of folders: 100.
-


Number of files: 255.
to protect the system, do not use a

u SB hub.
to disconnect the cable, the ignition switch must be in the LOCK


position.
take care not to trap the cable when closing the armrest.

335
4008_en_Chap10d_Mitsu4_ed01-2016
ERROR MESSAGES
If an error message appears on the screen, refer to the table below to find out what it means and the solution to be applied in order to
rectify it.
MESSAGE DESCRIPTION SOLUTION
CD
CH
e
CK DISC Disc not inserted correctly. Disc has condensation on its surface. Insert the disc with the printed face upwards.
Clear the dampness off the disc.
DISC
e RROR Disc dirty, scratched or distorted. Clean or replace the disc.
IN
te
RNAL
t
he player has malfunctioned for some reason. Check that there is no problem with the disc and insert another
disc. If the problem persists, contact a P
euge O t
dealer
.
H
e
A
t

e RROR
t
he temperature inside the unit is too high. Remove the disc and wait until the temperature of the unit returns
to normal.
USB
FIL
e

e
RROR The files selected cannot be read. Select files that can be read: MP3/WMA/AAC.
u

SB B
u S PWR
e
xternal power supply fault. Switch the system off and on again. If the problem persists,
contact a P
euge O t
dealer
.
LSI
e
RROR Communication error between the audio system and the external device.
u

NS
u
PPOR
te
D
FORMA
tThe files selected cannot be read. Select files that can be read: MP3/WMA/AAC.
u

NS
u
PPOR
te
D
D
e
VIC
e
An unsupported
u SB device has been connected.
u
se a suitable u SB cable.