21
“ISOFIX” fastenings
Your vehicle has been approved according to
the latest ISOFIX regulations.
The seats, shown below are equipped with
regulation ISOFIX anchoring:
There are three rings for each seat:
This ISOFIX fastening provides you with a
reliable, solid and rapid assembly of the child
seat in your vehicle.
ISOFIX child seats are equipped with two
locks anchored to the two A rings.
Some seats also have a top strap attached to
the B ring. To attach the child seat to the TOP TETHER:
F Remove and arrange the head rest before
installing the child seat in this place
(replace it once the child seat has been
removed),
F Pass the strap of the child seat behind the
back of the seat by centring it between the
gaps of the headrest pins,
F Fix the clip to the high strap of B ring
F Tighten the top strap.
When installing an ISOFIX child seat on
the rear left of the bench seat, before
fixing the seat, remove the central rear
seat belt beforehand to the centre of the
vehicle, so as not to hinder the operation
of the belt.
Incorrect installation of a child seat in a
vehicle will compromise the protection of
the child in the event of collision.
Follow the assembly notes shown in the
installation instructions delivered with the
child seat.
To see the ISOFIX seat installation options
in your vehicle, check the summary table.
- Two
A rings located between the back and
seat of the vehicle's, marked by a label. -
A B ring, located behind the seat and
marked by a label called Top Tether to
fasten the top strap. Top Tether
5
Safety
