20
U:Seat adapted to installation of a child
seat attached with a seat belt and
universal approved “rearward-facing”
and/or “forward-facing”.
UF: Seat adapted to installation of a child
seat attached with a seat belt and
universal approved “rearward-facing”.
X: Seat not adapted to installation of a
child seat of the weight group indicated. (a)
Universal child seat: child seat which
can be installed in all vehicles with a
seat belt.
(b) Group 0: from birth to 10 kg. Carrycots
and “car” beds cannot be installed in
the front passenger seat.
(c) Check the current legislation in your
country before installing your child in
this seat.
(d) To install a child seat in a rear seat
rearward-facing or forward-facing, bring
for ward the front seat, then raise the
back to allow enough space to the child
seat and the child's legs.
(e) A child seat with stay should never be
installed in this place. Remove and arrange the headrest before
installing a child seat with back to a
passenger seat.
Replace the headrest once the child seat
has been removed.
Safety
21
“ISOFIX” fastenings
Your vehicle has been approved according to
the latest ISOFIX regulations.
The seats, shown below are equipped with
regulation ISOFIX anchoring:
There are three rings for each seat:
This ISOFIX fastening provides you with a
reliable, solid and rapid assembly of the child
seat in your vehicle.
ISOFIX child seats are equipped with two
locks anchored to the two A rings.
Some seats also have a top strap attached to
the B ring. To attach the child seat to the TOP TETHER:
F Remove and arrange the head rest before
installing the child seat in this place
(replace it once the child seat has been
removed),
F Pass the strap of the child seat behind the
back of the seat by centring it between the
gaps of the headrest pins,
F Fix the clip to the high strap of B ring
F Tighten the top strap.
When installing an ISOFIX child seat on
the rear left of the bench seat, before
fixing the seat, remove the central rear
seat belt beforehand to the centre of the
vehicle, so as not to hinder the operation
of the belt.
Incorrect installation of a child seat in a
vehicle will compromise the protection of
the child in the event of collision.
Follow the assembly notes shown in the
installation instructions delivered with the
child seat.
To see the ISOFIX seat installation options
in your vehicle, check the summary table.
- Two
A rings located between the back and
seat of the vehicle's, marked by a label. -
A B ring, located behind the seat and
marked by a label called Top Tether to
fasten the top strap. Top Tether
5
Safety
23
i- U:suitable for “universal” category i-Size
restraint systems facing for wards and
backwards.
i - UF: suitable only for “universal” category
i-Size restraint systems facing for wards.
X: seating place not suitable for “universal”
category i-Size restraint systems.
(a) Check the current legislation in your
country before installing a child in this
seat. Remove and arrange the head rest before
installing a child seat with back in a
passenger seat.
Replace the headrest once the child seat
has been removed.
5
Safety
