2017 Peugeot 208 light

56
HeatingManual air conditioning
Temperature
F Turn the knob from blue
(cold) to red (hot) to adjust the
temperature to your wishes.
Air flow
F Turn the knob from position 1 to position 6 , to obtain
the desired air flow for your
comfort. If you place the air flow control at position
0 (off), the temperature in the vehicle will
no longer be maintained. A slight flow
of air can still be felt, resulting from the
for ward movement of the vehicle.
Adjusting the air
distribution
Windscreen and side windows.
Windscreen, side windows and
footwells.
Footwells.
Central and side air vents.
The air distribution can be
modulated by placing the knob at an
intermediate position.
Temperature
F Turn the knob from blue
(cold) to red (hot) to adjust the
temperature to your wishes.
Air flow
F Turn the knob from position 1 to position 6 , to obtain
the desired air flow for your
comfort.
1.
Adjusting the temperature.
2. Adjusting the air flow.
3. Adjusting the air distribution. 1.
Temperature adjustment.
2. Air flow adjustment.
3. Air distribution adjustment.
4. Air conditioning on/off.
Ease of use and comfort

57
Dual-zone automatic air
conditioning
Adjusting the air
distribution
Windscreen and side windows.
Windscreen, side windows and
footwells.
Footwells.
Central and side air vents.
The air distribution can be
modulated by placing the knob at an
intermediate position.
Air conditioning On/Off
The air conditioning is designed to operate
effectively in all seasons, with the windows
closed.
It enables you to:
-
i
n summer, to lower the temperature,
-
i

ncrease the effectiveness of the demisting
in winter, above 3°C.
Switching on
F Press the " A/C" button, the
button's indicator lamp comes
on.
The air conditioning does not operate
when the air flow adjustment control is in
position " 0".
To obtain cool air more quickly, you can
use recirculation of the interior air for a few
moments. Then return to the intake of exterior
a i r.
Switching off
F Press the " A/C" button again,
the button's indicator lamp goes
of f.
Switching the system off could result in
discomfort (humidity, condensation).
AUTO mode
F Press the " AUTO" button
successively. The indicator lamp
comes on at the first press; the
activated mode appears in the
digital air conditioning screen:
Provides soft and quiet operation by
limiting air flow.
Offers the best compromise
between a comfortable temperature
and quiet operation.
Provides strong and effective air
f low.
If you place the air flow control at position
0 (off), the temperature in the vehicle will
no longer be maintained. A slight flow
of air can still be felt, resulting from the
for ward movement of the vehicle.
1.Temperature adjustment for left /right
side.
2. Automatic comfort program.
3. Air conditioning on/off.
4. Air distribution adjustment.
5. Air flow adjustment.
3
Ease of use and comfort

59
Air distribution
F Press this button successively to direct the air flow alternatively
towards:
-

w

indscreen, side windows and foot wells,
-

w

indscreen and side windows (demisting or
def r o st ing),
-

t

he centre and side vents,
-

t

he central vents, the side vents and the
footwells,
-

t

he footwells.
Air flow
F Press this " full fan" button to
increase the air flow.
The air flow symbol (a fan) appears in the
screen. It is filled in progressively in relation to
the value required. F

P
ress this " empty fan " button to
reduce the air flow.
Manual mode
If desired, you can choose settings different
to those offered by the system, by adjusting a
setting manually. The other functions are still
managed automatically.
When you modify a setting, the indicator lamp
in the " AUTO" button goes off.
F

P
ress the "AUTO" button again
to return to the automatic
comfort programme.
Deactivating the system
F Press the " empty fan" air flow
button until the fan symbol
disappears and "---" appears.
This action deactivates all functions of the air
conditioning system.
Temperature is no longer regulated. A slight air
flow can still be felt however, resulting from the
for ward movement of the vehicle. Avoid driving for too long with the system
switched off (risk of misting and of
deterioration of the air quality).
Pressing the " full fan" button
reactivates the system with the
values in use at the time it was
switched off.
3
Ease of use and comfort

61
Rear screen demist –
defrost
The control button is located on the air
conditioning or heating system control panel.
Rear screen demisting – defrosting can only be
operated when the engine is running.
Switching on
F Press this button to demist /defrost the rear screen and,
depending on version, the
electric door mirrors. The
indicator lamp associated with
the button comes on.
Switching off
Demisting / defrosting switches off automatically
to prevent excessive electrical consumption.
F It is possible to stop the demisting/defrosting operation
before it is switched off
automatically by pressing the
button again. The indicator lamp
associated with the button goes
of f.
Courtesy lampTo demist or defrost the electric door
mirrors, with the engine running
press the heated rear window
switch.
Switch off the demisting/defrosting of
the rear screen and electric door mirrors
as soon as appropriate, as lower current
consumption results in reduced fuel
consumption.
1.Courtesy lamp
2. Map reading lamps
In this position, the light comes
on gradually:
-

w
hen you unlock the vehicle,
-

w
hen the key is removed from the ignition,
-
w

hen opening a door,
-
w

hen unlocking remotely.
3
Ease of use and comfort

62
It switches off gradually:
- w hen the vehicle is locked,
-

w
hen the ignition is switched on,
-

3
0 seconds after the last door is closed.
Permanently off.
Permanent lighting.
In "permanent lighting" mode, the lighting
time varies according to the circumstances:
-
w
hen the ignition is off, approximately
ten minutes,
-

i
n energy economy mode,
approximately 30


seconds,
-
w

ith the engine running, unlimited.
Map reading lamps
F With the ignition on, press the corresponding switch.
Take care not to put anything in contact
with the courtesy lamp.
Interior ambient lighting
Switching on
At night, panoramic sunroof light-emitting
diodes (LEDs) come on automatically when the
sidelamps are switched on.
Switching off
The interior ambient lighting switches off
automatically when the sidelamps are switched
of f. The guide-me-home lighting can be
configured in the menu Driving /
Vehicle.
Ease of use and comfort

67
Lighting control stalk
Travelling abroad
If planning to use your vehicle in a country
that drives on the other side of the road,
the headlamp dipped beams must be
adjusted to avoid dazzling oncoming
drivers. Contact a PEUGEOT dealer or a
qualified workshop.
Selection of main lighting
mode
Turn the ring to align the desired symbol with
the marking.Lighting off (ignition off) / Front
daytime running lamps (engine
running).
Sidelamps only.
Dipped or main beam headlamps.
Automatic illumination of headlamps.
Dipping the headlamps
Pull the lever to switch the lighting between
dipped and main beam headlamps.
In the lighting off and sidelamps modes, the
driver can switch on the main beam headlamps
temporarily ("headlamp flash") by keeping the
lever pulled.
Display
Illumination of the corresponding indicator
lamp in the instrument panel confirms that the
lighting selected is on.
Foglamps
The foglamps operate with dipped or main
beam headlamps on.
Rear foglamp only
F To switch it on, turn the ring for wards.
When the lighting is switched off automatically
(version with AUTO lighting), the foglamp and
the dipped beam headlamps will remain on.
F

T
o switch it off, turn the ring rear wards.
In some weather conditions (e.g. low
temperature or humidity), the presence
of misting on the internal sur face of the
glass of the headlamps and rear lamps is
normal; it disappears after the lamps have
been on for a few minutes.
4
Lighting and visibility

68
Front foglamps and rear foglamp
Rotate and release the ring:
F o nce for wards to switch on the front
foglamps,
F

f
or wards a second time to switch on the rear
foglamp,
F

o
nce rear wards to switch off the rear
foglamp,
F

r
ear wards a second time to switch off the
front foglamps.
If the lighting is switched off automatically
(version with AUTO lighting) or the dipped
beams are switched off manually, the foglamps
and sidelamps remain on.
F

T
urn the ring rear wards to switch off the
foglamps, the sidelamps will then switch off. In good or rainy weather, both day and
night, using the front foglamps and the
rear foglamp is prohibited. In these
situations, the power of their beams may
dazzle other drivers. They should only be
used in fog or falling snow.
In these weather conditions, it is your
responsibility to switch on the foglamps
and dipped beam headlamps manually as
the sunshine sensor may detect sufficient
light.
Do not forget to turn off the front foglamps
and the rear foglamp as soon as they are
no longer necessary.
Switching off of the lighting when the
ignition is switched off
On switching off the ignition, all of the
lighting turns off immediately, except for
dipped beam if automatic guide-me-home
lighting is activated.
Switching on the lighting after the
ignition is switched off
To reactivate the lighting control, set the
ring to 0 – lamps off, then to the desired
position.
When the driver's door is opened, a
temporary audible signal warns you that
the vehicle's lighting is on.
The lamps, with the exception of the
sidelamps, switch off automatically after
a maximum duration of 30
minutes to
prevent discharging of the battery.
Direction indicators
F Lower the lighting control stalk fully when turning left.
F

R
aise the lighting control stalk fully when
turning right.
Lighting and visibility

69
Three flashes
Move the stalk briefly upwards or downwards,
without going beyond the point of resistance;
the corresponding direction indicators will flash
three times.This function can be used at any speed,
but it is particularly useful for changing
lane on fast roads.
Automatic illumination of
headlampsIf you forget to cancel the direction
indicators for more than 20 seconds, the
volume of the audible signal will increase if
the speed is above 40
mph (60 km/h).When a low level of ambient light is detected
by a sunshine sensor, the number plate lamps,
sidelamps and dipped beam headlamps are
switched on automatically, without any action
on the part of the driver. They can also come
on if rain is detected, at the same time as
automatic operation of the windscreen wipers.
As soon as the brightness returns to a
sufficient level or after the windscreen wipers
are switched off, the lamps are switched off
automatically.
Switching on
F Turn the ring to the AUTO
position.
Activation of the function is accompanied by
a message in the screen.
Switching off
F Turn the ring to another position. Deactivation of the function is accompanied
by a message in the screen.
In fog or snow, the sunshine sensor may
detect sufficient light. In this case, the
lighting will not come on automatically.
Do not cover the sunshine sensor, linked
with the rain sensor and located in the
centre of the windscreen behind the rear
view mirror; the associated functions
would no longer be controlled.
Automatic guide-me-home
lighting
Association with automatic illumination of
headlamps provides the guide-me-home
lighting with the following additional options:
-

s
election of the lighting duration of 15, 30 or
60


seconds,
-

a
utomatic activation of guide-me-home
lighting when the automatic illumination of
headlamps is in operation.
4
Lighting and visibility