2017 NISSAN QUEST navigation update

HOW TO USE ECON BUTTON (models
without navigation system)
Push the “ECON” button to show fuel
economy information. (See “How to use INFO
button” (P.4-11).)
HOW TO USE INFO BUTTON
The display screen shows vehicle and navigation
information for your convenience.
The information shown on the screen should be
a guide to determine the condition of the vehicle.
See the following for details.
SAA2478
Models with navigation system
SAA1511Models without navigation system
1. Push the INFO button on the control panel.
2. Select an item from the INFO menu.
3. After viewing or adjusting the information on the following screens, push the BACK
button to return to the INFO menu.
See the separate Navigation System Owner’s
Manual for the following items:
. Where am I?
. Traffic Info
. Weather Info
. Map Update
. Navigation Version
*When the ignition switch is in the ON position,
the “Navigation Version” key is displayed after
selecting the “Others” key.
Monitor, heater, air conditioner, audio, phone and voice recognition systems4-11

4-100Monitor, heater, air conditioner, audio, phone and voice recognition systems
Refer to your device manufacturer’s owner
information regarding the proper use and care
of the device.
Compatibility
The following models are available:
Models with navigation system:
.Fifth generation iPod
Š(firmware version
1.2.3 or later)
. iPod Classic
Š(firmware version 1.1.1 or
later)
. First generation iPod touch
Š(firmware ver-
sion 2.0.0 or later)
. Second generation iPod touch
Š(firmware
version 1.2.3 or later)
. First generation iPod nano
Š(firmware ver-
sion 1.3.1 or later)
. Second generation iPod nano
Š(firmware
version 1.1.3 or later)
. Third generation iPod nano
Š(firmware ver-
sion 1.1 or later)
. Fourth generation iPod nano
Š(firmware
version 1.0.2 or later)
Models without navigation system:
. Fifth generation iPod
Š(firmware version 1.3)
. First generation iPod ClassicŠ(firmware
version 1.1.2 PC) .
Second generation iPod Classic
Š(firmware
version 2.0 PC)
. First generation iPod touch
Š(firmware ver-
sion 2.1)
. Second generation iPod touch
Š(firmware
version 2.1.1)
. First generation iPod nano
Š(firmware ver-
sion 1.3.1)
. Second generation iPod nano
Š(firmware
version 1.1.3)
. Third generation iPod nano
Š(firmware ver-
sion 1.1 PC)
. Third generation iPhone
Š(firmware version
2.1)
Make sure that the iPod
Šversion is updated.
Audio main operation
Push the ignition switch to the ACC or ON
position. Then, push the DISC·AUX button
repeatedly to switch to the iPod
Šmode.
If the system has been turned off while the iPodŠ
was playing, pushing the ON·OFF button will
start the iPodŠ.
play:
When the DISC·AUX button is pushed with the
system off and the iPod
Šconnected, the system
will turn on. If another audio source is playing
and the iPod
Šis connected, push the DISC·AUX button repeatedly until the center display
changes to the iPod
Šmode.
Interface:
The interface for iPod
Šoperation shown on the
vehicle center display is similar to the iPodŠ
interface. Use the multi-function controller and
the ENTER or BACK button to play the iPodŠ
with your favorite settings.
The following items can be chosen from the
menu list screen. For further information about
each item, see the iPod
ŠOwner’s Manual.
. Now Playing
. Playlists
. Artists
. Albums
. Songs
. Podcasts
. Genres
. Composers
. Audiobooks
. Shuffle Songs
. Play mode
The following touch-panel buttons shown on the
screen are also available:
.
: returns to the previous screen.
.
: plays/pauses the music selected.