
CAUTIONlDepending  on  how  the  devices  are  handled,
audio  files  being  damaged  or  lost,  therefore
it is recommended that data be backed up.NOTEl Depending on the generation, model, or soft-
ware  version  of  the  iPod/iPhone,  playback
on  this  product  may  not  be  possible. (→7-12 )  Additionally,  playback  as  ex-
plained  in  this  document  may  not  be  possi- ble.
l For vehicles with a Bluetooth ®
 2.0 interface,
the  types  of  devices  that  can  be  connected
may vary.
For  details,  access  the  MITSUBISHI
MOTORS website.
Please read and agree to the “Warning about
Links  to  the  Web  Sites  of  Other  Compa- nies”.  The  websites  mentioned  above  may
connect  you  to  websites  other  than  the MITSUBISHI MOTORS website.
http://www.mitsubishi-motors.com/en/prod-
ucts/index.html
l Usage of iPod/iPhone hardware with the lat-
est software version is recommended.
l Regarding  how  to  connect  the  iPod/iPhone,
refer  to  “How  to  connect  an  iPod”  on  page
7-69.
l When  connecting  the  iPod/iPhone,  use  a
commerciallyavailable  iPod  connection  ca- ble.NOTEl Set  up  the  device  in  order  that  no  unsafe  ac-
tions, such as plugging in the connection ca-ble are taken while driving.
l When  inserting  and  removing  the  iPod/
iPhone,  for  safety’s  sake  first  stop  the  vehi- cle.
l Depending  on  the  status  of  the  iPod/iPhone,
it may take some time until the device is rec- ognized, or playback starts.
l Buttons  on  the  product  will  not  operate
while iPod/iPhone is connected.
l iPod/iPhone  specifications  and  settings  may
mean  that  connection  is  not  possible,  or  re-
sult in differences in operation or display.
l Depending on audio data in the iPod/iPhone,
track  information  may  not  be  displayed  cor-
rectly.
l Depending  on  the  status  of  the  vehicle  and
device,  the  iPod/iPhone  may  not  play  back after starting the engine.
l Data  containing  copyright  information  may
not play back.
l It  is  recommended  that  the  iPod/iPhone
equaliser settings be set to flat.
l Operate  the  iPod/iPhone  while  connected  to
this product.
l If  the  iPod/iPhone  is  connected  via  Blue-
tooth  as  a  Bluetooth-  capable  audio  device,
then  do  not  connect  the  iPod/iPhone  using
an  iPod  cable.  Connection  using  both  meth- ods will result in erroneous operation.
l If an iPod/iPhone does not operate correctly,
then  remove  the  iPod/iPhone  from  the  prod-
uct, reset, then reconnect.Play iPod
Press  the  MEDIA  key  to  set  the  iPod  as  the
source.
 
The  selected  source  is  indicated  on  the  dis-
play.
Select the Track (File)
Press  the   key  or   key  to  select  the
track.
 
This enables selection of the next or previous
track.
Fast Forward or Rewind
Hold down the 3 key or the 4 key.
 
Fast forward/rewind is possible.
Switch Playback Mode
Repeat  playback  and  shuffle  playback  are
possible.
Repeat Playback (RPT)
Press the 1RPT key.
 
Repeat  playback  of  the  track  currently  being played.
Listen to an iPod
7-30OGAE17E2For pleasant driving7        

NOTElPressing again will cancel.
Shuffle Playback (RDM)
Press the 2RDM key.
 
Play  tracks  in  the  category  currently  being played in a random order.
NOTEl Pressing again will cancel.
Album Shuffle Playback
Hold down the 2RDM key.
 
Play  back  the  album  in  a  random  order
(tracks in any order on the album).
NOTEl Pressing again will cancel.
Search Tracks
Search categories or track names, and select a
track. 1. Turn  the 
  /SEL  key  to  select  the  cate-
gory.
2. Press  the /SEL  key.  Categories  or
tracks  within  the  selected  category  are displayed.
3. Turn  the 
  /SEL  key  to  select  the  cate-
gory or track.
4. Press the 
/SEL key.
Repeat  steps  1  to  4,  and  search  for tracks.
Select  the  track,  and  press  the 
  /SEL
key to play.
NOTEl While  the  category  (1 st
  level)  is  selected,
press  the  6   key  to  cancel  track  search
mode.
l If  there  is  no  operation  for  10  seconds  after
selecting  the  category,  then  track  search
mode will be cancelled.
l Select  the  category,  and  hold  down  the
  /SEL  key  to  start  playback  from  the  first
track in that category.
l While  the  track  is  selected,  press  the  6 
key to return to the previous operation.
l While  the  track  is  selected,  hold  down  the  6
 key to cancel track search mode.
l If there is no operation for five seconds after
selecting the track, that file is played back.
l iPod operations such as selecting a track will
cancel track search mode.
Listen to Audio Files on a
USB Device E00736501388
By  connecting  commercially-available  USB
devices such as USB memory to this product, you  can  play  back  audio  files  on  these
through the product.CAUTIONl Do  not  leave  the  USB  device  unattended  in
the vehicle.
l Never hold these devices in your hand to op-
erate while driving, as this is dangerous.
l Do not use hard discs, card readers, or mem-
ory readers, as damage may occur to these or
to  the  data  contained  therein.  If  these  are  er- roneously  connected,  then  turn  the  ignition
switch  to  the  “LOCK”  position  or  put  the operation mode in OFF, then remove.
l Because  of  the  risk  of  data  loss,  it  is  recom-
mended that files be backed up.
l No  guarantee  is  made  as  regards  damage  to
the  USB  device,  nor  regarding  loss  or  dam-
age to data contained therein.
l Depending  on  how  the  devices  are  handled,
audio  files  being  damaged  or  lost,  therefore
it is recommended that data be backed up.
Listen to Audio Files on a USB Device
7-31OGAE17E2For pleasant driving7               

NOTElDigital  audio  players  that  support  the  mass
storage  class  specifications  can  be  connec- ted.
l For details regarding the types of USB devi-
ces  that  can  be  connected  and  the  types  of files that can be played back in vehicles with
a  Bluetooth ®
  2.0  interface,  refer  to  “Types
of  connectable  devices  and  supported  file specifications” on page 7-70.
l Regarding  how  to  connect  USB  devices,  re-
fer  to  “How  to  connect  a  USB  memory  de-vice” on page 7-68.
l When  connecting  a  USB  device,  use  a  con-
nection cable. Failure to use a connection ca-
ble  when  connecting  may  place  undue  load on, or damage the USB connector.
l Set  up  the  device  in  order  that  no  unsafe  ac-
tions, such as plugging in the connection ca-ble are taken while driving.
l When  inserting  and  removing  the  USB  de-
vice, for safety’s sake first stop the vehicle.
l Do  not  insert  other  than  audio  devices  into
the  USB  port.  Damage  to  the  device  or equipment may result.
l Depending  on  the  status  of  the  USB  device,
it may take some time until the device is rec-
ognized, or playback starts.
l Depending  on  USB  devices,  buttons  on  the
product  will  not  operate  while  the  USB  de-
vice is connected.
l USB  device  specifications  and  settings  may
mean  that  connection  is  not  possible,  or  re- sult in differences in operation or display.NOTEl Depending on audio data in the USB device,
track  information  may  not  be  displayed  cor-
rectly.
l Depending  on  the  status  of  the  vehicle  and
device,  the  iPod/iPhone  may  not  play  back after starting the engine.
l Data  containing  copyright  information  may
not play back.
l This product can play back MP3, WMA, and
AAC format audio files.
l Depending on the type of USB device, usage
may not be possible, or functions that can beused may be restricted.
l The  recommended  file  system  for  USB
memory is FAT32.
l The  maximum  supported  capacity  for  USB
memory is 32GB.
l Operate the USB device containing recorded
audio files while connected to this product.
Play Back of Audio Files on a
USB Device
Press the MEDIA key to set
 
USB as the source. The selected source is in- dicated on the display.
Select the Track (File)
Press  the   key  or   key  to  select  the
track.
 
This enables selection of the next or previous
track.
Fast Forward or Rewind
Hold down the 3 key or the 4 key.
 
Fast forward/rewind is possible.
Switch Playback Mode
Repeat  playback,  random  playback,  and  scan
playback are possible.
Repeat Playback (RPT)
Press the 1RPT key.
 
Repeat  playback  of  the  track  currently  being
played.
NOTEl Pressing again will cancel.
l Selecting a file will cancel this.
Folder Repeat Playback
Hold down the 1RPT key.
 
Repeat playback of the tracks within the fold- er currently being played.
Listen to Audio Files on a USB Device
7-32OGAE17E2For pleasant driving7        

NOTElPressing again will cancel.
l Even  if  the  file  is  selected,  folder  repeat
playback will not be cancelled.
Folder  Random  Playback
(RDM)
Press the 2RDM key.
 
Play  tracks  in  the  folder  currently  being
played in a random order.
NOTEl Pressing again will cancel.
l Even  if  the  file  is  selected,  folder  random
playback will not be cancelled.
All Folder Random Playback
Hold down the 2RDM key.
 
Play  the  tracks  in  all  folders  in  a  random  or-
der.
NOTEl Pressing again will cancel.
l Even if the file is selected, all folder random
playback will not be cancelled.Scan Playback (SCAN)
Press the PTY/SCAN key.
 
Play the first 10 seconds of each of the tracks on the whole USB device in order.
NOTEl Press  this  button  again  during  playback  if
you  wish  to  hear  that  track,  and  that  trackwill play normally.
Folder Scan Playback
Hold down the PTY/SCAN key.
 
Play  the  first  10  seconds  of  the  first  track  in each folder on the USB device in order.
NOTEl Press  this  button  again  during  playback  if
you  wish  to  hear  that  track,  and  that  trackwill play normally.
Search Tracks
Search folders and files, and select a track.
1. Turn the 
/SEL key to select the folder.
2. Press the 
/SEL key.
 
Files  within  the  selected  folder  are  dis- played.
3. Turn the /SEL key to select the file.
4. Press the 
/SEL key.
 
This plays the selected file (track).NOTEl While  the  folder  is  selected,  press  the  6 key to cancel track search mode.
l If  there  is  no  operation  for  10  seconds  after
selecting  the  folder,  then  track  search  mode will be cancelled.
l Select the folder, and hold down the 
/SEL
key  to  start  playback  from  the  first  track  in
that folder.
l While the file is selected, press the 6 
 key
to return to the previous operation.
l While  the  file  is  selected,  hold  down  the  6
 key to cancel track search mode.
l If there is no operation for five seconds after
selecting the file, that file is played back.
l Operations  such  as  selecting  a  track  will
cancel track search mode.
Listen to Audio Files on a USB Device
7-33OGAE17E2For pleasant driving7               

NOTElIf  the  confirmation  function  is  active,  the
voice  guide  confirms  if  the  artist  name  is
correct.  If  the  artist  name  is  correct,  say “Yes”.  If  not,  say  “No”.  After  the  voice
guide  says  “Artist  not  found,  please  try again,” the system returns to step 2.
7. The  system  exits  the  voice  recognition
mode and starts playback.
To search by album title
E00749000032
1. Say “Play” on the main menu.
NOTEl The Bluetooth ®
 2.0 interface starts recogniz-
ing the connected device.
If the connected device cannot be recognized
or  a  connection  error  occurs,  the  Bluetooth ®
2.0  interface  starts  an  appropriate  voice
guide. Follow the voice guide.
2. After  the  voice  guide  says  “Would  you
like to play by Artist, Album, Playlist or Genre?,” say “Album”.
NOTEl If  you  say  “Album  

5.If  there  are  two  or  more  matches,  the
voice  guide  will  say  “More  than  one
match was found, would you like to play 
If you say “No,” the next matching play-
list name is uttered by the system.NOTEl If you say “No” to three or all playlist names
uttered  by  the  system,  the  voice  guide  will say “Playlist not found, please try again” and
the system returns to step 2.
6. After  the  voice  guide  says  “Playing
NOTEl If  the  confirmation  function  is  active,  the
voice  guide  confirms  if  the  playlist  name  is
correct.  If  the  playlist  name  is  correct,  say
“Yes”.  If  not,  say  “No”.  After  the  voice guide  says  “Playlist  not  found,  please  try
again,” the system returns to step 2. Refer to “Confirmation  function  setting”  on  page 7-50.
7. The  system  exits  the  voice  recognition
mode and starts playback.
To search by genre
E00749200034
1. Say “Play” on the main menu.
NOTEl The Bluetooth ®
 2.0 interface starts recogniz-
ing the connected device.
If the connected device cannot be recognized
or  a  connection  error  occurs,  the  Bluetooth ®
2.0  interface  starts  an  appropriate  voice
guide. Follow the voice guide.
2. After  the  voice  guide  says  “Would  you
like to play by Artist, Album, Playlist or Genre?,” say “Genre”.
NOTEl If  you  say  “Genre  
step 3.
3. After  the  voice  guide  says  “What  Genre
would  you  like  to  play?,”  say  the  music
type.
4. If  there  is  only  one  match,  the  system
proceeds to step 6.
5. If  there  are  two  or  more  matches,  the
voice  guide  will  say  “More  than  one match was found, would you like to play
If  you  say  “No,”  the  next  matching
genre is uttered by the system.NOTEl If you say “No” to three or all genres uttered
by  the  system,  the  voice  guide  will  say
“Genre  not  found,  please  try  again”  and  the
system returns to step 2.
6. After  the  voice  guide  says  “Playing
NOTEl If  the  confirmation  function  is  active,  the
voice  guide  confirms  if  the  genre  is  correct.
If  the  genre  is  correct,  say  “Yes”.  If  not,  say “No”. After the voice guide says “Genre not
found,  please  try  again,”  the  system  returns
to  step  2.  Refer  to  “Confirmation  function setting” on page 7-50.
7. The  system  exits  the  voice  recognition
mode and starts playback.
To play iPod/USB memory device tracks via voice operation (vehicles with Bluetooth ®
 2.0 interface)
7-36OGAE17E2For pleasant driving7       

Switching Playback Mode
Repeat  playback,  random  playback,  and  scanplayback are possible.
Repeat Playback (RPT)
Press the 1RPT key.
 
Repeat  playback  of  the  track  currently  being played.
NOTEl Each  time  the  1RPT  key  is  pressed,  this
switches in the order Repeat OFF, 1 track re-
peat, All track repeat, and Repeat OFF.
Random Playback (RDM)
Press the 2RDM key.
 
Play the tracks in the Bluetooth Audio device in a random order.
NOTEl Pressing again will cancel.
Scan Playback (SCAN)
Press the PTY/SCAN key.
 
Play the first 10 seconds of each of the tracks
on  the  whole  Bluetooth  Audio  device  in  or-
der.NOTEl Press  this  button  again  during  playback  if
you  wish  to  hear  that  track,  and  that  trackwill play normally.Use AUX*
E00736900079
By  connecting  external  input  cables  andAUX  devices  to  this  product,  you  can  play
back  tracks  on  these  devices  through  the
product.
 
Hold down the MEDIA key.
Switch to the AUX mode, and “AUX” is dis- played.
Auxiliary Audio connecter (RCA)Auxiliary Audio connector (RCA)
A- Left audio input connector (white)
B- Right audio input connector (red)CAUTIONl Connect an audio device with external sound
input  mode  cancelled,  or  with  the  soundturned down.
l Even  if  not  inserted,  the  product  will  switch
to  AUX,  therefore  take  care  with  volume
levels when not inserted.NOTEl Depending  on  the  audio  device  to  be  con-
nected, noise may be emitted.
l For  power,  use  the  battery  power  source  in-
cluded  in  the  audio  device  to  be  connected.
Using  the  connected  audio  device  while charging  through  the  cigarette  lighter  socket
in  the  vehicle  may  lead  to  noise  being  emit- ted through the speakers.
l If  no  audio  devices  are  connected,  then  do
not  select  the  external  sound  input  mode.  If external  sound  input  mode  is  selected  while
no  audio  devices  are  connected,  then  sound
may be emitted through the speakers.
Use AUX*
7-38OGAE17E2For pleasant driving7      
![MITSUBISHI ASX 2017  Owners Manual (in English) Set-
tings
nameSettings ValueSettings contentCT OFFDo not update
the time even if
time data is re-
ceived.
*:  It  is  necessary  to  press  the  [TP]  key  and
turn traffic message standby mode “ON MITSUBISHI ASX 2017  Owners Manual (in English) Set-
tings
nameSettings ValueSettings contentCT OFFDo not update
the time even if
time data is re-
ceived.
*:  It  is  necessary  to  press  the  [TP]  key  and
turn traffic message standby mode “ON](/manual-img/19/34865/w960_34865-286.png)
Set-
tings
nameSettings ValueSettings contentCT OFFDo not update
the time even if
time data is re-
ceived.
*:  It  is  necessary  to  press  the  [TP]  key  and
turn traffic message standby mode “ON”.
Time Setting
Turning  the  RDS  setting  CT  setting  “CT
OFF” enables manual setting of the time. 1. Select  “YES”  at  the  “Adjust  time”
screen, and press the 
/SEL key.
The  hour  can  be  adjusted.  Press  the
/SEL key again to adjust the minutes.
2. Turn the 
/key to adjust the time.
3. Press the 
/SEL key.
This completes the adjustment.
NOTEl In  order  to  finish  adjusting  the  time,  hold
down  the /SEL  key  until  the  seconds  are
reset to “00”.PHONE Settings
Change  the  mobile  phone  voice  cut-in  set-
tings  and  the  Bluetooth ®
  2.0  interface  lan-
guage.
Depending  on  the  vehicle,  PHONE  settings
may not be possible.
NOTEl Cancel  functions  such  as  the  mobile  phone
“dial  lock”,  and  connect  while  on  the  stand- by screen.
l While  connected,  mobile  phone  (receiving
calls,  etc.)  operations  may  not  function  cor- rectly.
l Depending  on  the  distance  between  the
product  and  the  mobile  phone,  the  condi- tions within the vehicle, and types of screen-ing, connection may not be possible. In thesecases,  situate  the  mobile  phone  as  close  as
possible to the product.
l Even  though  a  Bluetooth-capable  mobile
phone,  characteristics  and  specifications
may  mean  that  correct  operation  may  not  be possible.
l For  safety’s  sake,  do  not  operate  the  mobile
phone  while  driving.  When  operating  the mobile phone, first stop the vehicle in a safe
location.
l Even  though  a  Bluetooth-capable  mobile
phone,  phone  specifications  and  settings
may  result  in  differences  in  display,  or  pre- vent correct operation.NOTEl Some  models  may  not  be  confirmed  as  con-
nected, or may not connect.
Supported profiles
Hands-freeHFP (v1.5)Phone book trans-
ferOPP (v1.1), PBAP
(v1.0)
Vehicles without a Bluetooth ®
 2.0 interface
A  hands-free  kit  (available  separately)  is  re- cquired.
(“Set  value”  bold  typeface  indicated  factory
settings.)
Settings valueSettings contentPHONE OFFDo not use mobile
phone voice cut-in.PHONE MUTEDuring mobile phone
voice cut-in, mute
the audio.PHONE ATTDuring mobile phone
voice cut-in, output
audio from all speak-
ers.PHONE IN-LDuring mobile phone
voice cut-in, output
sound from the left
front speaker.
System settings
7-43OGAE17E2For pleasant driving7