2017 MINI Convertible Owner's Manual

Settings are stored for the profile currently
used.
Setting
the
voice
dialog Voice dialog for the voice activation system, re~
fer to page 27.
Units
of
measurement
Setting
the
units
of
measurement
To set the units for fuel consumption, route/ distance and temperature:1. "Settings"2."Language/Units"3.Select the desired menu item.4.Select the desired unit.
Settings are stored for the profile currently
used.
Brightness.
Setting
the
brightness To set the brightness of the Control Display:
1. "Settings"2."Control display"3."Brightness"4.Turn the Controller until the desired bright~ness is set.5.Press the Controller.
Settings are stored for the profile currently
used.
Depending on the light conditions, the bright~ ness settings may not be clearly visible.
LED
ring
on
the
central
instrument
cluster
The
concept
The LED ring displays light animations to repre~
sent specific functions.
Basic
displays
Basic functions, for example the tachometer,
can be set to be displayed continually if so de~ sired.
Event
displays
Functions that are only displayed temporarily,
for example the volume or temperature set~ tings, can be set as event displays.
Several vehicle assistance functions can also be displayed on the LED ring. This display corre~sponds with the displays of the function in the
respective display.
Example:
tachometer
Like the tachometer in the instrument cluster, the light animations of the tachometer's basic
display show the current RPMs and the respec~
tive RPM warning margins.
Display'

Adjusting
the
LED
ring
Via the onboard monitor:1. "Settings"2."Center Instrument"3."Basic display" or "Event display"4.Select the desired setting.
Setting
the
brightness The brightness can be adjusted when night
lighting is active in the instrument cluster.
Via the onboard monitor:
1. "Settings"2."Center Instrument"3."Brightness"4.Turn the controller.
Settings are stored for the profile currently
used.
Head-up
Display
Concept This system projects important information into
the driver's field of vision, for instance the
speed.
The driver can get information without averting
his or her eyes from the road.
General
information
Follow the instructions for cleaning the Head-
up Display. For additional information, see the
chapter on care.
Safety
information WARNING
When extending and retracting the pro~
jection screen of the Head-up Display, body
parts can be jammed. There is a risk of injury.
Make sure that the area of movement of the
projection screen is clear during opening and
closing. '

Display
Overview
The following information is displayed on the Head-up Display:'

John
Cooper
Works:
sport
displays
in
the
Head-up
Display
General
information
The sport displays in the Head-up Display assist
with a sporty driving style.
Switching
on Via the onboard monitor:1. "Settings"2."Head-Up Display"3."Displayed information"4."Sport displays"
With navigation system: if the sport displays are
switched on, no navigation content will be dis~
played on the Head-up Display.
Display
1Speed2Shift point indicator3Gear display4Current engine speed5Warning field, speed
Shift
point
indicator
Concept
Shift point indicator in the Head-up Display in~
dicates the optimum shifting point. Thus, with a
sporty driving style, the best possible vehicle
acceleration is achieved.
Functional
requirements'

mation on the LED ring of the central instru~ment cluster.
Displaying
the
Always
Open
Timer1. "Vehicle info"2."Always Open"
Display
The following information is displayed on the Control Display:
'

Overview,
buttons'

LightsVehicle
features
and
op

Roadside
parking
lights
Concept The vehicle can be illuminated on one side.
Switching
on
With the ignition switched off, press the lever either up or down past the resistance point forapprox. 2 seconds.
Switching
off Briefly press the lever to the resistance point in
the opposite direction.
Welcome
lights
and
headlight
courtesy
de