reach its operating temperature. The sound of
the engine may change during this time.
Automatic transmission
XDepress the brake pedaland keep it
depressed.
XShift the transmission to position P.
Transmission position display Pis shown in
the multifunction display.
iYou can start the engine in transmission
position Pand N.
Starting procedure with the SmartKey
To start the engine using the SmartKey instead
of KEYLESS-GO, pul lthe Start/Stop button out
of the ignitio nlock.
XTurn the SmartKey to position 3in the ignition
lock (Ypag e115) and release it as soon as the
engine is running.
UsingK EYLESS-GO to start the engine
The Start/Stop button can be used to start the
vehicl emanually withou tinserting the SmartKey
into the ignitio nlock. The Start/Stop button
must be inserted in the ignitio nlock and the
SmartKey must be in the vehicle. This mode for
starting the engine operates independently of
the ECO start/stop automatic engine start func-
tion.
XDepress the brake pedala nd keep it
depressed.
XPress the Start/Stop button once
(Ypag e115).
The engine starts.
Pulling away
General notes
GWARNING
If the engine speedisa bove the idling speed
and you engage transmission position Dor R,
the vehicl ecould pul lawa ysuddenly.T here is
ar isk of an accident.
When engaging transmission position Dor R,
alway sfirmly depress the brake pedala nd do
not simultaneously accelerate.
!Change gearing ood time and avoi dspin-
ning the wheels. You could otherwise damage
the vehicle.
Depress the accelerator carefully when pulling
away.
The vehicl elocks centrally once you have pulled
away. The locking knobs in the doors drop down.
You can open the doors from the insid eatany
time.
You can als odeactivate the automatic locking
feature (
Ypag e173).
It is only possible to shift the transmission from
position Pto the desired position if you depress
the brake pedal. Only then is the shift lock
released.
iUpshifts take place at highere ngine speeds
after acold start. This help sthe catalytic con-
verter to reach its operating temperature
more quickly.
Information on the automatic release of the
electric parking brake (
Ypag e133).
Hill start assist
Hill start assist help syou when pulling awa yfor-
ward sorinr everse on an uphill gradient. It holds
the vehicl efor as hort time after you have
removed you rfoot from the brake pedal. This
gives you enoug htime to move you rfoot from
the brake pedaltot he accelerator pedala nd to
depress it before the vehicl ebegins to roll.
GWARNING
After ashort time, hill start assist wil lnolon-
ger brake you rvehicl eand it could roll away.
There is arisk of an accident and injury.
Therefore, quickly move you rfoot from the
brake pedaltot he accelerator pedal. Never
leave the vehicl ewhen it is held by hill start
assist.
Hill start assist is not active if:
Ryou are pulling awa yonalevel road or on a
downhill gradient.
Rthe transmission is in position N.
Rthe electric parking brake is applied.
RESP®is malfunctioning.
Driving117
Driving and parking
Z
ECO start/stop function
Introduction
The ECO start/sto pfunction switches the
engine off automaticall yifthevehicle is stopped
unde rcertain conditions.
The engine start sautomaticall ywhen th edriver
want stop ull away again.T he ECO start/stop
function therebyh elps you to reducethe fuel
consumptio nand emissionsofy our vehicle.
Important safety notes
GWARNING
If th eengine is switched off automaticall yand
you exi tthe vehicle ,the engine is restarted
automatically. The vehicle may begin moving.
Thereisar isk of accidenta nd injury.
If you wish to exi tthe vehicle ,always tur noff
th ei gnition and secure th evehicle against
rolling away.
General notes
:ECO start/sto pdisplay
The ECO start/sto pfunction is activated when-
ever you switch on th eengine usingt heSmart-
Key or th eStart/Sto pbutton.
If th eengine has been switched off automati-
cally by th eECO start/sto pfunction,t heè
ECO symbol is shownint hemultifunction dis-
play.
Automatic engine switch-off
If th evehicle is braked to astandstil lin D or N,
th eE CO start/sto pfunction switches off the
engine automatically. The ECO start/sto
pfunction is operational
when:
Rth ei ndicator lamp in th eECO butto nislit
green.
Rth eo utside temperatur eiswithin th erange
that is suitable for th esystem.
Rthee ngine is at normal operatin gtem pera-
ture.
Rth es et temperatur efor th evehicle interior
has been reached.
Rth eb attery is sufficiently charged.
Rthes ystem detect sthatthe windshield is not
fogged up when th eair-conditioning system is
switched on.
Rth eh ood is closed.
Rthed river'sd oor is closed and th edriver's
seat belt is fastened.
All of th evehicle's systems remain active when
th ee ngine is stopped automatically.
Automatic engine switch-off can tak eplacea
maximum of four times in arow (initial stop, then
three subsequents tops).
The HOLD function can be activated if the
engine has been switched off automatically. It is
then no tnecessaryt ocontinue applyingt he
brakes durin gthe automatic stop phase.W hen
you depress th eaccelerato rpedal, th eengine
start sautomaticall yand th ebraking effect of
th eH OLDf unction is deactivated.
Automatic engine start
The engine start sautomaticall yif:
Ryou switch off th eECO start/sto pfunction by
pressingt heECO button
Rin transmission position Dor Ntheb rake
pedal is released and th eHOLDfunction is not
active
Ryou depress th eaccelerato rpedal
Ryou engage reverseg earR
Ryou mov ethe transmission out of position P
Ryou switch to driveprogram S+
Ryou unfasten your seat belt or open th edriv-
er'sd oor
Rthev ehicle start storoll
Rtheb rak esystem requires this
Rthet em peratur einthevehicle interiord evi-
ate sfromt heset range
118Driving
Driving and parking
Rthe systemdetects moisture on the wind-
shiel dwhent he air-conditioning systemi s
switched on
Rthe battery's condition of charge is too low
Shiftin gthe transmission to position Pdoes not
start the engine.
Deactivatin goractivatin gthe ECO
start/sto pfunction
XTo deactivate: press ECO button :.
Indicato rlam p; goes out.
XTo activate: press ECO button :.
Indicato rlam p; lights up.
If indicator lamp ;is off ,the ECO start/stop
functio nhasbeen deactivated manuall yoras
the resul tofamalfunction. The engine will then
not be switched off automaticall ywhenthe vehi-
cle stops.
Driving119
Dr iving an dparking
Z
Problems with the engine
ProblemPossible causes/consequences andMSolutions
The engine does not
start.The HOLD function or DistancePilot DISTRONIC is activated.
XDeactivatet he HOLD function (Ypage 148) or Distanc ePilot
DISTRONIC (Ypage 146).
XTry to start the engine again.
The engine does not
start. The starter motor
can be heard.RThere is amalfunction in the engine electronics.
RThere is amalfunction in the fuel supply.
Before attempting to start the engine again:
XTurn the SmartKey back to position 0in the ignition lock.
or
XPress the Start/Stop button repeatedly until all indicator lamps in
the instrumentc luster go out.
XTry to start the engine again (Ypage 116). Avoid excessively long
and frequent attemptstos tart the engine as these will drain the
battery.
If the engine does not start after several attempts:
XConsult aqualified specialist workshop.
The engine does not
start. You cannot hear
the starter motor.The on-board voltage is too low because the battery is too weak or
discharged.
XJump-start the vehicle (Ypage 249).
If the engine does not start despite attempt stojump-start it:
XConsult aqualified specialist workshop.
The starter motor was exposed to athermal load that was too high.
XAllow the starter motor to cool down for approximately two minutes.
XTry to start the engine again.
If the engine still does not start:
XConsult aqualified specialist workshop.
The engine is not running
smoothly and is misfir-
ing.There is amalfunction in the engine electronics or in amechanical
componentoft he engine management system.
XOnly depress the accelerator pedal slightly.
Otherwise, non-combusted fuel may get into the catalytic converter
and damage it.
XHave the cause rectified immediately at aqualified specialist work-
shop.
120Driving
Driving and parking
ProblemPossible causes/consequences andMSolutions
The coolant temperature
gauge showsavalue
above 248 ‡(120 †).
The coolant warning
lamp may also be on and
aw arning tone may
sound.The coolant level is too low. The coolant is too hot and the engine is no
longer being cooled sufficiently.
XStop as soon as possible and allow the engine and the coolant to
cool down.
XCheck the coolant level (Ypage 233). Observe the warning notes
as you do so and add coolant if necessary.
If the coolant level is correct,t he engine radiator fan may be faulty. The
coolant is too hot and the engine is no longer being cooled sufficiently.
XAt coolant temperatures below 248 ‡(120 †), drive to the nearest
qualified specialist workshop.
XAvoid heavy loads on the engine as you do so, e.g. driving in moun-
tainou sterrai nand stop-and-go traffic.
DYNAMIC SELEC Tbutton
Use the DYNAMIC SELECT button to change the
drive program. Depending on the drive program selected the following vehicle characteristics
wil lchange:
Rthe drive (engine and transmission manage-
ment)
Rthe suspension( vehicles with adaptive
adjustabl edamping or AMG sports suspen-
sion)
Rthe steering
Rthe availability of the ECO start/stop function
Each time you start the engine with the Smart-
Key or the Start/Stop button, drive program Cis
activated. For further information about starting
the engine, see (
Ypag e116).
XPress DYNAMIC SELECT button :as many
times as necessary until the desired drive
programiss elected.
The selected drive programa ppears in the
multifunction display. After ashort time the displayg
oes out and the status icon of the
selected drive programa ppears.
In addition, the current drive programs ettings
are displayed briefly in the multimedi asystem
display.
iIn af ew countries, the ECO start/stop func-
tion is deactivated at the factory due to the
available fuel grade. In this case, the ECO
start/stop function is not available in any
drive program, regardless of the displayint he
multimedi asystem display.
Availabl edrive programs:
CComfortComfortabl eand economi-
cal driving characteristics
S SportSporty driving characteris-
tics
S+ Sport PlusParticularly sporty driving
characteristics
IIndividualIndividua lsettings
EEconomyParticularly economical
driving characteristics
Additional information for drive programs
(Ypag e125).
DYNAMICS ELECTbutton121
Driving and parking
Z
The current transmission position and drive pro-
gram appear in the multifunction display.
Engaging parkposition P
XWhen the vehicle is stationary, depress the
brake pedal.
XPress button:.
Engaging parkp ositionPautomatically
Park position Pis automatically engaged if:
Ryou switch off the engine using the SmartKey
and remove the SmartKey
Ryou switch off the engine using the SmartKey
or using the Start/Stop button and open the
driver's door or front-passenger door
Rthe driver's door is opened when the vehicle is
stationary or driving at very low speed and the
transmission is in position Dor R
Under certain conditions, the automatic trans-
mission shifts automatically to transmission
position Pif the HOLD function or Distance Pilot
DISTRONIC is activated. Observe the informa-
tion on the HOLD function (
Ypage 148) and on
Distance Pilot DISTRONIC (Ypage 144).
Engaging reverse gear R
!Only shift the automatic transmission to R
when the vehicle is stationary.
XDepress the brake and keep it pressed.
XPush the selector lever forwards past the first
point of resistance.
The ECO start/sto pfunction is not available
when reverse gear is engaged. Further informa-
tion on the ECO start/sto pfunction
(
Ypage 118).
Shifting to neutral N
GWARNING
If children are left unsupervised in the vehicle,
they could:
Ropen the doors, thus endangeringo ther
people or road users.
Rget out and disrupt traffic.
Roperate the vehicle's equipment.
Additionally, children could set the vehicle in
motion if, for example, they:
Rrelease the parking brake.
Rshiftin gthe automatic transmission out of
park position P
RStart the engine.
There is arisk of an accident and injury.
When leaving the vehicle, alwayst ake the
SmartKey with you and lock the vehicle. Never
leave children or animals unattended in the
vehicle. Always keep the SmartKey out of
reach of children.
XWhen the vehicle is stationary, depress the
brake pedal.
XPush the selector lever forwards or back to
the first point of resistance.
If you switch the engine off with the transmis-
sion in position Ror D,t he automatic transmis-
sion shifts to Nautomatically.
With the SmartKey: if you then open the driv-
er's door or the front-passenger door or remove
the SmartKey from the ignition, the automatic
transmission shifts to Pautomatically.
With KEYLESS-GO: if you then open the driver's
or front-passenger door, the automatic trans-
mission shifts to P.
If you want the automatic transmission to
remain in neutral N,e .g. when having the vehicle
cleaned in an automatic car wash with atowing
system:
XVehicles with KEYLESS-GO: remove the
Start/Stop button from the ignition lock.
XInsert the SmartKey into the ignition lock.
XAll vehicles: switch the ignition on.
XDepress the brake pedal and keep it
depressed.
XShift to neutral N.
Automatic transmission123
Driving and parking
Z
Problems with the transmission
ProblemPossible causes/consequences andMSolutions
The transmission has
problems shifting gear.The transmission is losing oil.
XHave the transmission checked ataqualified specialist workshop
immediately.
The acceleration ability
is deteriorating.
The transmission no lon-
ger changes gear.The transmission is in emergency mode.
It is only partly possible to engage the gears or the transmission is in
position N.
XStop the vehicle.
XShift the transmission to position P.
XSwitch off the engine.
XWait at least ten seconds before restarting the engine.
XShift the transmission to positionDor R.
XHave the transmission checked at aqualified specialist workshop
immediately.
Refueling
Important safety notes
GWARNING
Fuel is highly flammable. If you handle fuel
incorrectly, there is arisk of fire and explo-
sion.
You must avoid fire, open flames, creating
sparks and smoking. Switch off the engine
and, if applicable, the auxiliary heating before refueling.
GWARNING
Fuel is poisonous and hazardous to health.
There is arisk of injury.
You must make sure that fuel does not come into contact with your skin, eyes or clothing
and that it is not swallowed. Do not inhale fuel
vapors. Keep fuel away from children.
If you or others come into contact with fuel,
observe the following:
RWash away fuel from skin immediately
using soap and water.
RIf fuel comes into contact with your eyes,
immediately rinse them thoroughly with
clean water. Seek medical assistance with-
out delay.
RIf fuel is swallowed, seek medical assis-
tance without delay.Don ot induce vomit-
ing.
RImmediately change out of clothing which
has come into contact with fuel.
GWARNING
Electrostatic buildupc an create sparks and
ignite fuel vapors. There is arisk of fire and
explosion.
Always touch the vehicle body before opening
the fuel filler flap or touching the fuel pump
nozzle. Any existing electrostatic buildupi s
thereby discharged.
Do not get into the vehicle again during the refu-
eling process. Otherwise, electrostatic charge
could build up again.
!Do not use diesel to refuel vehicles with a
gasoline engine. Do not switch on the ignition
if you accidentally refuel with the wrong fuel.
Otherwise, the fuel will enter the fuel system. Even small amounts of the wrong fuel could
result in damage to the fuel system and the
engine. Notify aqualified specialist workshop
and have the fuel tank and fuel lines drained
completely.
Refueling129
Driving and parking
Z
cle from rolling away by applying the parking
brake.
XApplythe electri cparking brake.
XShif tthe transmission to position P
(Ypage 123).
XWith the SmartKey: turn the SmartKey to
position 0in the ignition lock and remove it.
The immobilizer is activated.
XWith KEYLESS-GO: press the KEYLESS-GO
Start/Stop button (Ypage 115).
The engine stopsa nd allthe indicator lamps in
the instrument cluster go out.
Whe nthe driver' sdoorisc losed, this corre-
sponds to SmartKey position 1.W hent he
driver' sdooriso pen, this corresponds to
SmartKey position 0(
Ypage 115).
The engine can be switched off while the vehicle
is in motio nbypressing and holding the Start/
Stop button for aboutt hree seconds. Thisfunc-
tion operate sindependently of the ECO start/
stop automatic engine switch-off function.
Electric parkin gbrake
General notes
GWARNING
If yo ulea ve childre nunsupervised in the vehi-
cle ,they could set it in motio nby,for example:
Rrelease the parking brake.
Rshift the automatic transmission outoft he
parking position P.
Rstartthe engine.
In addition, they may operate vehicle equip-
ment and become trapped .There is arisko f
an accident and injury.
Whe nleaving the vehicle ,alway stake the
SmartKey with yo uand lock the vehicle .Never
leave childre nunsupervised in the vehicle. The function of the electri
cparking brake is
dependent on the on-board voltage .Ifthe on-
board voltage is low or there is amalfunction in
the system, it may not be possible to applyt he
released parking brake.
XIf this is the case ,only park the vehicle on
level ground and secure it to prevent it rolling
away.
XShif tthe automatic transmission to position
P.
It may not be possible to release an applied
parking brake if the on-board voltage is low or
there is amalfunction in the system. Contact a
qualified specialist workshop.
The electri cparking brake performs afunction
test at regula rinterval swhile the engine is
switched off. The sounds that can be heard while
this is occurring are normal.
Applyin gorreleasin gmanually
XTo engage: push handle :.
Whe nthe electri cparking brake is engaged,
the F (USA only )or! (Canada only)
red indicator lamp lights up in the instrument
cluster.
The electricp arking brake can also be applied
whe nthe SmartKey is removed.
XTo release: pull handle:.
The red F(USA only )or! (Canada
only )indicator lamp in the instrument cluster
goe sout.
The electricp arking brake can only be released:
Rif the SmartKey is in position 1in the ignition
lock (Ypage 115) or
Rif the ignition wa sswitched on using the
Start/Stop button
132Parking
Drivin gand parking