2017 MERCEDES-BENZ GLE HYBRID display

Displaying ranges
The approximat e range is base d on th e curren t
drivin g style.X
Press th e Y or e butto n on th e steerin g
whee l to selec t th e Tri p menu.X
Confir m by pressing v on th e steerin g
wheel.
The approximat e tota l range that can be cov-
ere d is calculated accordin g to your curren t
drivin g style and th e amount of fue l in th e
tank . If there is only a small amount of fue l lef t
in th e fue l tank , a vehicle wit h a fue l pum p

X
Press the Y or e button on the steering
wheel to select the Settings menu.X
Press the d or c button to select the
Hybrid submenu.X
Confirm by pressing v on the steering
wheel. X
Press the d or c button to select the
Maximum Charge Current: function.
You will see the selected setting. X
Press the v button to save the setting.
The maximum charge current values in the on-
board computer may deviate from the charg-
ing cable values.
Further information on charging the high-volt-
age battery (PLUG-IN HYBRID vehicles)
( Y
page 30).
Setting the departure time You can climatize the vehicle interior prior to
your departure with the "Set departure time"
function. Further information on pre-entry cli-
mate control ( Y
page 18).
If you recharge the high-voltage battery, the
function also displays the charging prediction. X
Press the Y or e button on the steering
wheel to select the Settings menu.X
Press the d or c button to select the
Hybrid submenu.X
Confirm by pressing v on the steering
wheel. X
Press the d or c button to select the
Departure Time: function.
You will see the selected setting. X
To set no departure time: press the d or
c button to select No Preselection .X
Press v to confirm.
If you recharge the high-voltage battery, the
multifunction display also shows the time when the high-voltage battery will be fully
charged.
or X
To set a departure time: press d or c
A , B or C to select the desired preset. X
Press the v button to confirm the selec-
tion. X
Press d or c to set the hours.X
Press v to confirm. X
Press d or c to set the minutes.X
Press v to confirm.
If you recharge the high-voltage battery, the
multifunction display shows the expected
condition of charge of the high-voltage bat-
tery for the departure time set.
Further information on charging the high-volt-
age battery (PLUG-IN HYBRID vehicles)
( Y
page 30).
Instrument cluster submenu
Selecting permanent display The Permanent Display: function allows you
to choose whether the multifunction display
always shows the outside temperature or the
speed.
The speed display is inverse to the speedome-
ter. X
Press the Y or e button on the steering
wheel to select the Settings menu.X
Press the d or c button to select the
Instrument Cluster submenu.X
Confirm by pressing v on the steering
wheel. X
Press the d or c button to select the
Permanent Display: function.
The current setting, Outside Temperature ,
Speedometer [km/h] or Speedometer
[mph] appears. X
To change the setting: press v again.44
Menus and submenus
On-board computer and displays

Display messages
Hybrid drive syste mDisplay messages
Possible causes/consequences an d P Solutions
r Vehicl e Operational
Switch the Ignition
Off Before Exitin g You are exitin g th e vehicle when it is in a ready-to-driv e state. The
READY indicator in th e multifunction display is on . A warnin g tone also
sounds.
If you leav e th e vehicle:X
Safeguar d th e vehicle against rollin g away (se e th e vehicle Opera-
tor' s Manual). X
Switc h of f th e ignition and remov e th e SmartKey.
If you do no t leav e th e vehicle:X
Switc h of f th e electrical consumers , e.g. automatic climat e control,
seat heating.
Please note th e following: th e electrical consumers are supplied by th e
12 V battery. If th e vehicle is lef t in a ready-to-driv e stat e fo r an exten-
ded period, it will switch of f once th e 12 V battery is almost empty. It
will then only be possible to start th e vehicle usin g a secon d battery
(jump-starting).
Change the curren t
drive progra m
before changing the
operating
mode. or E xit manual
drive progra m M
before changing the
operating mod e You hav e attempted to chang e th e operatin g mode when in automatic
drive program Sport, Individual (wit h activated Spor t characteristics )
or manual drive program M .X
Selec t th e Comfort , Slippery or Individual (wit h activated Comfort or
Ec o characteristics ) drive program ( Y
page 22).X
Selec t th e preferred operatin g mode HYBRID , E-MODE , E-SAVE or
CHARGE ( Y
page 21).
E-MODE Currently
Unavailable The condition of charg e of th e high-voltage battery has dropped to th e
lowe r limit and th e E-MODE operatin g mode has bee n switched off.
Driving wit h th e internal combustion engin e is activated and th e oper-
atin g mode switches to th e basi c HYBRID setting .X
Continue drivin g usin g th e internal combustion engine.
You can switch to th e E-SAVE or CHARGE operatin g mode as
require d ( Y
page 21).
If you selec t CHARGE , th e high-voltage battery is charged.
Once th e charg e level display fo r th e high-voltage battery has
increase d slightly, you can switch to th e E-MODE operatin g mode
again .
Onl y E-MODE Availa ‐
ble Power Limite d
Refuel Immediately The fue l tank has bee n run dry and th e combustion engin e has bee n
switched off.
A warnin g tone also sounds.
The vehicle will be powered by electrical energ y only. Performanc e is
restricte d and th e vehicle may accelerat e more slowly than normal.X
Refuel at th e nearest gas station without fail .
In th e "Total range and electric range" menu, you can display th e
approximat e range of th e vehicle ( Y
page 43).Display messages 45
On-board computer and displays Z

Display messages
Possible causes/consequences and P Solutions
Withou t starting
engine again, con ‐
sul t workshop You canno t start th e engin e again due to a malfunction .
A warning tone also sounds.
If th e engin e is running:X
Visit a qualified specialist workshop .
If you switch off th e engine:X
Safeguar d th e vehicl e against rollin g away (see th e vehicl e Opera-
tor' s Manual). X
Notify a qualified specialist workshop or breakdown service.
á Towing Not Permit ‐
ted See Operator' s
Manual The hybrid drive system is malfunctioning .X
Hav e th e vehicl e transporte d on a transporte r or trailer to th e near-
est qualified specialist workshop .

Display messages
Possible causes/consequences and P Solutions

Vehicle Display messages
Possible causes/consequences and P Solutions
Auxiliary Battery
Malfunction The auxiliary battery for the automatic transmission is no longer being
charged. X
Visit a qualified specialist workshop. X
Until then, set the automatic transmission to position P before you
switch off the engine. X
Before leaving the vehicle, apply the electric parking brake.
; Pre-Entry Climate
Ctrl. (Via Smart‐
Key) Available
Again After Engine
Start With the engine switched off, you have attempted to switch on the pre-
entry climate control more than twice. X
Let the engine run for ten seconds.
After running the engine, the pre-entry climate control is opera-
tional again.
; Pre-Entry Climate
Ctrl. (Via Smart‐
Key) Inoperative HV
Battery Low The on-board voltage is too low. The pre-entry climate control cannot
be switched on. X
Drive for a longer distance.
The battery is being charged. When the condition of charge of the
high-voltage battery is over the specified minimum, pre-entry cli-
mate control is operational again.
Warning and indicator lamps in the instrument cluster
Safety systems The information "while the engine is running" given in the vehicle Operator's Manual regarding the
signaling behavior of a warning/indicator lamp corresponds to the READY driving status. When a
warning/indicator lamp lights up in the READY driving status with the corresponding information,
the causes/consequences and solutions given in the vehicle Operator's Manual also apply to your
vehicle.48
Warning and indicator lamps in the instrument cluster
On-board computer and displays

Warning/
indicator
lamp Q Signal type
Possible causes/consequences and P Solutions
M'
Q ' (USA only), M (Canada only): the red brake system warning lamp is
shown in the READY driving status.
A warning tone also sounds.
G WARNING
RBS is malfunctioning. Pedal travel may be longer than usual and braking per-
formance may be affected.
There is a risk of an accident. X
Pull over and stop the vehicle safely as soon as possible, paying attention to road
and traffic conditions. Do not continue driving under any circumstances. X
Safeguard the vehicle against rolling away (see the vehicle Operator's Manual). X
Consult a qualified specialist workshop. X
Observe the additional display messages in the multifunction display.

Important safety notes Observ e th e amended note s on operating safet y
of th e multimedia system in th e vehicle's Oper -
ator's Manual
G WARNIN G
If you operate information systems and com-
munication equipmen t integrate d in th e vehi-
cle while driving , you will be distracte d from
traffic conditions. You could also lose control
of th e vehicle. Ther e is a ris k of an accident.
Only operate th e equipmen t when th e traffic
situation permits. If you are no t sur e that this
is possible , park th e vehicl e payin g attention
to traffic condition s and operate th e equip-
men t when th e vehicl e is stationary.
You must observ e th e legal requirements for th e
country in whic h you are currentl y driving when
operating th e multimedia system.
Information on operating th e multimedia system
can be foun d in th e vehicle's Operator's Manual.
Vehicle menu
Menu overview The vehicl e men u of th e multimedia system is
added to or changed for th e hybrid operation on
th e followin g displays:R
Energ y flo w display ( Y
page 50)R
Fue l consumption display and th e generated
electrical energ y ( Y
page 50)
Open th e vehicl e men u wit h th e