2017 MERCEDES-BENZ GLC engine

[x] Cancel search: engine

Page 147 of 374

MERCEDES-BENZ GLC 2017  Owners Manual a result of the later automatic transmission
shift points. R
the suspension exhibits particularly stiff
springing and damping settings (vehicles with
AIR BODY CONTROL). R
gliding mode is not available

Page 148 of 374

MERCEDES-BENZ GLC 2017  Owners Manual Temporary setting X
To activate: shift the DIRECT SELECT lever to
position �[ .X
Pull steering wheel paddle shifter �C or �D .
Temporary setting will be active for a certain
amount of time. Under cert

Page 149 of 374

MERCEDES-BENZ GLC 2017  Owners Manual make sure that the engine speed does not
reach the red area of the tachometer. X
To shift down: pull steering wheel paddle
shifter �C .
The automatic transmission shifts down to
the next gear.
Automat

Page 150 of 374

MERCEDES-BENZ GLC 2017  Owners Manual Problems with the transmission Problem
Possible causes/consequences and �P Solutions
The transmission has
problems shifting gear. The transmission is losing oil. X
Have the transmission checked at a q

Page 151 of 374

MERCEDES-BENZ GLC 2017  Owners Manual clean water. Seek medical assistance with-
out delay. R
If fuel is swallowed, seek medical assis-
tance without delay. Do not induce vomit-
ing. R
Immediately change out of clothing which
has come int

Page 152 of 374

MERCEDES-BENZ GLC 2017  Owners Manual X
Switch off the engine. X
Remove the SmartKey from the ignition lock.
or, in vehicles with KEYLESS-GO start-function
or KEYLESS ‑ GOX
Open the driver's door.
The vehicle electronics are now in

Page 153 of 374

MERCEDES-BENZ GLC 2017  Owners Manual Problems with fuel and the fuel tank Problem
Possible causes/consequences and �P Solutions
Fuel is leaking from the
vehicle.
G WARNING
The fuel line or the fuel tank is faulty.
Risk of explosion or fi

Page 154 of 374

MERCEDES-BENZ GLC 2017  Owners Manual When the DEF supply drops to a minimum, the
Remaining Starts: 16 message is shown in
the multifunction display.
The Remaining Starts: 16 message in the
multifunction display indicates how many more
ti