2017 MAZDA MODEL MX-5 RF fuses

4–118
When Driving
i-ACTIVSENSE
NOTE
  When the ignition is switched off,
the condition before the system
was turned off is maintained.
For example, if the ignition is
switched OFF while the Blind
Spot Monitoring (BSM) and Rear
Cross Traf¿ c Alert (RCTA) systems
are operational, the Blind Spot
Monitoring (BSM) and Rear Cross
Traf¿ c Alert (RCTA) systems remain
operational the next time the ignition
is switched ON.
  The Blind Spot Monitoring (BSM)
and Rear Cross Traf¿ c Alert (RCTA)
systems are turned off when the
battery is disconnected such as
when the battery terminals or fuses
have been removed and re-installed.
To turn the Blind Spot Monitoring
(BSM) and Rear Cross Traf¿ c Alert
(RCTA) systems back on, press
the Blind Spot Monitoring (BSM)
switch.
/:A(.'',A'FKVKQPKPFD

6–1 6–1
6Maintenance and Care
How to keep your Mazda in top condition.
Essential Information ........................................................................ 6-2
Introduction ................................................................................... 6-2
Scheduled Maintenance ..................................................................... 6-3
Scheduled Maintenance ................................................................ 6-3
Maintenance Monitor .................................................................. 6-10
Owner Maintenance ......................................................................... 6-12
Owner Maintenance Precautions ................................................ 6-12
Bonnet ......................................................................................... 6-14
Engine Compartment Overview ................................................. 6-16
Engine Oil ................................................................................... 6-17
Engine Coolant ............................................................................ 6-20
Brake/Clutch Fluid ...................................................................... 6-22
Window and Headlight Washer Fluid ......................................... 6-23
Body Lubrication ........................................................................ 6-24
Wiper Blades ............................................................................... 6-24
Battery ......................................................................................... 6-28
Key Battery Replacement ........................................................... 6-31
Tyres ............................................................................................ 6-33
Light Bulbs .................................................................................. 6-38
Fuses ........................................................................................... 6-47
Appearance Care.............................................................................. 6-53
Exterior Care ............................................................................... 6-53
Interior Care ................................................................................ 6-64
/:A(.'',A'FKVKQPKPFD

6–47
Maintenance and Care
Owner Maintenance
Boot light
1. Wrap a small À athead screwdriver
with a soft cloth to prevent damage to
the lens, and then remove the lens by
carefully prying on the edge of the lens
with the À athead screwdriver.
2. Disconnect the connector from the unit.
3. Disconnect the bulb by pulling it out.
4. Install the new bulb in the reverse order
of the removal procedure.
Fuses
Your vehicle's electrical system is
protected by fuses.
If any lights, accessories, or controls do
not work, inspect the appropriate circuit
protector. If a fuse has blown, the inside
element will be melted.
If the same fuse blows again, avoid using
that system and consult an expert repairer,
we recommend an Authorised Mazda
Repairer as soon as possible.
Fuse Replacement
Replacing the fuses on the vehicle's left
side
If the electrical system does not work, ¿ rst
inspect the fuses on the vehicle's left side.
1. Make sure the ignition is switched off,
and other switches are off.
2. Open the fuse panel cover.
/:A(.'',A'FKVKQPKPFD

6–48
Maintenance and Care
Owner Maintenance
3. Pull the fuse straight out with the
fuse puller provided on the fuse block
located in the engine compartment.
4. Inspect the fuse and replace it if it is
blown.
NormalBlown
5. Insert a new fuse of the same amperage
rating, and make sure it ¿ ts tightly. If
it does not ¿ t tightly, have an expert
install it. We recommend an Authorised
Mazda Repairer.
If you have no spare fuses, borrow one
of the same rating from a circuit not
essential to vehicle operation, such as
the AUDIO or OUTLET circuit.
CAUTION
Always replace a fuse with a genuine
Mazda fuse or equivalent of the same
rating. Otherwise you may damage the
electric system.
6. Reinstall the cover and make sure that
it is securely installed.
Replacing the fuses under the bonnet
If the headlights or other electrical
components do not work and the fuses
in the cabin are normal, inspect the fuse
block under the bonnet. If a fuse is blown,
it must be replaced. Follow these steps:
1. Make sure the ignition is switched off,
and other switches are off.
2. Remove the fuse block cover.
NOTE
If the lock is forcefully opened, the
fuse block cover may come in contact
with the frame when it is removed and
become scratched.
When removing the cover, remove
it slowly according to the following
procedure.
1. Disengage the rear lock by
pressing down on the front tab
with your ¿ ngers.
2. Remove the front tab while
slightly lifting the front of the
cover.
/:A(.'',A'FKVKQPKPFD

6–49
Maintenance and Care
Owner Maintenance
NOTE
3. Remove the cover while lifting it
and sliding it to the rear.
3. If any fuse but the MAIN fuse is
blown, replace it with a new oneof the
same amperage rating .
Normal
Blown
WARNING
Do not replace the main fuse and
multiplex slow blow fuse by yourself.
Have an Authorised Mazda Repairer
perform the replacement:
Replacing these fuses by yourself
is dangerous because they are high
current fuses. Incorrect replacement
could cause an electrical shock or a
short circuit resulting in a ¿ re.
4. Reinstall the cover and make sure that
it is securely installed.
/:A(.'',A'FKVKQPKPFD

9–9
Speci¿ cations
Speci¿ cations
Standard tyre
(Except Arab Gulf Cooperation Council)
Tyre size InÀ ation pressure
Front Rear
195/50R16 84V 200 kPa (2.0 bar, 29 psi) 200 kPa (2.0 bar, 29 psi)
195/50RF16 84V 200 kPa (2.0 bar, 29 psi) 200 kPa (2.0 bar, 29 psi)
205/45R17 84W 200 kPa (2.0 bar, 29 psi) 200 kPa (2.0 bar, 29 psi)
(Arab Gulf Cooperation Council)
Tyre size InÀ ation pressure
Front Rear
195/50RF16 84V 200 kPa (2.0 bar, 29 psi) 200 kPa (2.0 bar, 29 psi)
Winter tyre
Tyre size InÀ ation pressure
Front Rear
195/50R16
*1 M S 200 kPa (2.0 bar, 29 psi) 220 kPa (2.2 bar, 32 psi)
205/45R17
*2 M S 200 kPa (2.0 bar, 29 psi) 220 kPa (2.2 bar, 32 psi)
*1 Load index and Speed Symbol: 84Q/84S/84H/84V
*2 Load index and Speed Symbol: 84Q/84S/84H/84V/84W
Wheel nut tightening torque
When installing a tyre, tighten the wheel nut to the following torque.
108—147 N·m (12—14 kgf·m, 80—108 ft·lbf)
Fuses
Refer to Fuses on page 6-47 .
Brakes
If you require information regarding the wear limit speci¿ cation for the brake disc plates
and the measurement method, please contact an expert repairer, we recommend an
Authorised Mazda Repairer. The information is made freely available.
/:A(.'',A'FKVKQPKPFD

10–4
Index
Engine
Bonnet release ............................... 6-14
Coolant .......................................... 6-20
Engine compartment overview ..... 6-16
Exhaust gas.................................... 3-26
Oil .................................................. 6-17
Starting ............................................ 4-5
Engine Coolant Temperature
Gauge ......................................... 4-27, 4-36
Essential Information ............................ 6-2
Exhaust Gas ........................................ 3-26
Exterior Care ....................................... 6-53
Aluminium wheel maintenance..... 6-58
Bright-metal maintenance ............. 6-57
Cavity protection ........................... 6-57
Convertible Top (Retractable Fastback)
Maintenance .................................. 6-61
Convertible Top (Soft Top)
Maintenance .................................. 6-58
Maintaining the ¿ nish ................... 6-55
Paint damage touch-up .................. 6-57
Plastic part maintenance ................ 6-63
Undercoating ................................. 6-57
F
Flasher
Hazard warning ............................. 4-79
Headlights ..................................... 4-63
Flat Tyre ................................................ 7-3
Mounting the tyre .......................... 7-17
Removing a tyre ............................ 7-14
Floor Mat ............................................ 3-61
Fluid
Brake/Clutch ................................. 6-22
Washer ........................................... 6-23
Fluids
Classi¿ cation ................................... 9-5
Foot Brake ........................................... 4-81
Forward Sensing Camera (FSC) ....... 4-129 Fuel
Filler À ap and cap .......................... 3-27
Gauge ................................... 4-27, 4-36
Requirements................................. 3-24
Tank capacity .................................. 9-6
Fuel Consumption Display ................. 4-94
Fuel Economy Monitor ....................... 4-93
Control status display .................... 4-94
Effectiveness display ..................... 4-96
Ending screen display ................... 4-96
Fuel consumption display ............. 4-94
Fuel-Filler Flap
When fuel-¿ ller À ap cannot be
opened ........................................... 7-26
Fuses ................................................... 6-47
Panel description ........................... 6-50
Replacement .................................. 6-47
G
Gauges ................................................. 4-24
H
Hazard Warning Flasher ...................... 4-79
Hazardous Driving .............................. 3-60
Head Restraint ....................................... 2-8
Headlight Washer ................................ 4-77
Headlights
Coming home light ........................ 4-68
Control........................................... 4-63
Flashing ......................................... 4-68
High-low beam .............................. 4-68
Leaving home light ....................... 4-69
Levelling ....................................... 4-70
Running lights ............................... 4-70
Washer ........................................... 4-77
High Beam Control System (HBC) ... 4-103
High Beam Control System (HBC)
indicator light (green) .................. 4-105
Hill Launch Assist (HLA) ................... 4-84
Horn .................................................... 4-79
/:A(.'',A'FKVKQPKPFD