2017 MAZDA MODEL CX-5 engine

4–78
When Driving
Brake
AUTOHOLD System is Turned On
Press the AUTOHOLD switch and when
the AUTOHOLD standby indicator light
turns on, the AUTOHOLD function turns
on.
AUTOHOLD standby
indicator light

NOTE
When all of the following conditions are
met, the AUTOHOLD standby indicator
light turns on when the AUTOHOLD
switch is pressed and the AUTOHOLD
function turns on.
  The ignition is switched ON (engine is
running).
  The driver's seat belt is fastened.  The driver's door is closed.  There is no problem with the
AUTOHOLD function.

To operate AUTOHOLD and hold the
brakes
1. Depress the brake pedal and bring the vehicle to a complete stop.
2. The AUTOHOLD active indicator light in the instrument cluster turns on and
the brakes are held.


3. The vehicle is held in its stopped position even with the brake pedal
released.

NOTE
When all of the following conditions are
met, the AUTOHOLD operates and the
brakes are held.
  The ignition is switched ON (engine is
running).
  The vehicle is stopped.  The brake pedal is being depressed.  The AUTOHOLD active indicator light
turns on.
  The accelerator pedal is not depressed.  The driver's seat belt is fastened.  The driver's door is closed.  There is no problem with the
AUTOHOLD function.
  The electric parking brake (EPB) is
released.
  There is no problem with the electric
parking brake (EPB) function.
  (Automatic transaxle vehicle)  The selector lever is in a position other
than R position or the vehicle tilts
forward with the selector lever in the R
position.

CX-5_8FN1-EA-16L_Edition1.indb 782016/12/12 10:06:01

4–82
When Driving
ABS/TCS/DSC
Antilock Brake System
(ABS)
The ABS control unit continuously
monitors the speed of each wheel. If
one wheel is about to lock up, the ABS
responds by automatically releasing and
reapplying that wheel's brake.

The driver will feel a slight vibration in
the brake pedal and may hear a chattering
noise from the brake system. This is
normal ABS system operation. Continue to
depress the brake pedal without pumping
the brakes.

The warning light turns on when the
system has a malfunction.
Refer to Warning Indication/Warning
Lights on page 4-33 .
WARNING
Do not rely on ABS as a substitute for
safe driving: The ABS cannot compensate for unsafe
and reckless driving, excessive speed,
tailgating (following another vehicle
too closely), driving on ice and snow,
and hydroplaning (reduced tire friction
and road contact because of water on
the road surface). You can still have an
accident.

NOTE
  Braking distances may be longer on
loose surfaces (snow or gravel, for
example) which usually have a hard
foundation. A vehicle with a normal
braking system may require less
distance to stop under these conditions
because the tires will build up a wedge
of surface layer when the wheels skid.
  The sound of the ABS operating may
be heard when starting the engine
or immediately after starting the
vehicle, however, it does not indicate a
malfunction.

CX-5_8FN1-EA-16L_Edition1.indb 822016/12/12 10:06:02

4–83
When Driving
ABS/TCS/DSC
Traction Control System
(TCS)
The Traction Control System (TCS)
enhances traction and safety by controlling
engine torque and braking. When the TCS
detects driving wheel slippage, it lowers
engine torque and operates the brakes to
prevent loss of traction.

This means that on a slick surface, the
engine adjusts automatically to provide
optimum power to the drive wheels,
limiting wheel spin and loss of traction.

The warning light turns on when the
system has a malfunction.
Refer to Warning Indication/Warning
Lights on page 4-33 .
WARNING
Do not rely on the Traction Control
System (TCS) as a substitute for safe
driving: The Traction Control System (TCS)
cannot compensate for unsafe and
reckless driving, excessive speed,
tailgating (following another vehicle
too closely), and hydroplaning
(reduced tire friction and road contact
because of water on the road surface).
You can still have an accident.

Use snow tires or tire chains and drive at
reduced speeds when roads are covered
with ice and/or snow: Driving without proper traction devices
on snow and/or ice-covered roads
is dangerous. The Traction Control
System (TCS) alone cannot provide
adequate traction and you could still
have an accident.

NOTE
To turn off the TCS, press the TCS OFF
switch (page 4-84 ).

TCS/DSC Indicator Light

This indicator light stays on for a few
seconds when the ignition is switched
ON. If the TCS or DSC is operating, the
indicator light fl ashes.

If the light stays on, the TCS, DSC
or the brake assist system may have a
malfunction and they may not operate
correctly. Take your vehicle to an
Authorized Mazda Dealer.
NOTE
   In addition to the indicator light
fl ashing, a slight lugging sound will
come from the engine. This indicates
that the TCS/DSC is operating properly.
   On slippery surfaces, such as fresh
snow, it will be impossible to achieve
high rpm when the TCS is on.

CX-5_8FN1-EA-16L_Edition1.indb 832016/12/12 10:06:02

4–84
When Driving
ABS/TCS/DSC
TCS OFF Indicator Light

This indicator light stays on for a few
seconds when the ignition is switched ON.
It also illuminates when the TCS OFF
switch is pressed and TCS is switched off.
Refer to TCS OFF Switch on page 4-84 .

If the light remains illuminated and the
TCS is not switched off, take your vehicle
to an Authorized Mazda Dealer. The DSC
may have a malfunction.
TCS OFF Switch
Press the TCS OFF switch to turn off the
TCS. The TCS OFF indicator light in the
instrument cluster will illuminate.


Press the switch again to turn the TCS
back on. The TCS OFF indicator light will
turn off.
NOTE
   When TCS is on and you attempt to free
the vehicle when it is stuck, or drive
it out of freshly fallen snow, the TCS
(part of the DSC system) will activate.
Depressing the accelerator will not
increase engine power and freeing
the vehicle may be dif fi cult. When this
happens, turn off the TCS.
   If the TCS is off when the engine is
turned off, it automatically activates
when the ignition is switched ON.
  Leaving the TCS on will provide the
best traction.
  If the TCS OFF switch is pressed and
held for 10 seconds or more, the TCS
OFF switch malfunction detection
function operates and the TCS system
activates automatically. The TCS OFF
indicator light turns off while the TCS
system is operative.

CX-5_8FN1-EA-16L_Edition1.indb 842016/12/12 10:06:02

4–85
When Driving
ABS/TCS/DSC
Dynamic Stability
Control (DSC)
The Dynamic Stability Control (DSC)
automatically controls braking and engine
torque in conjunction with systems such
as ABS and TCS to help control side slip
when driving on slippery surfaces, or
during sudden or evasive maneuvering,
enhancing vehicle safety.

Refer to ABS (page 4-82 ) and TCS
(page 4-83 ).

DSC operation is possible at speeds
greater than 20 km/h (12 mph).

The warning light turns on when the
system has a malfunction.
Refer to Warning Indication/Warning
Lights on page 4-33 .
WARNING
Do not rely on the Dynamic Stability
Control as a substitute for safe driving: The Dynamic Stability Control (DSC)
cannot compensate for unsafe and
reckless driving, excessive speed,
tailgating (following another vehicle
too closely), and hydroplaning
(reduced tire friction and road contact
because of water on the road surface).
You can still have an accident.

CAUTION
 The DSC may not operate correctly unless the following are observed:
 Use tires of the correct size specifi ed for your Mazda on all four wheels.
 Use tires of the same manufacturer, brand and tread pattern on all four
wheels.
 Do not mix worn tires.  The DSC may not operate correctly when tire chains are used or a temporary spare
tire is installed because the tire diameter
changes.

TCS/DSC Indicator Light

This indicator light stays on for a few
seconds when the ignition is switched
ON. If the TCS or DSC is operating, the
indicator light fl ashes.

If the light stays on, the TCS, DSC
or the brake assist system may have a
malfunction and they may not operate
correctly. Take your vehicle to an
Authorized Mazda Dealer.
CX-5_8FN1-EA-16L_Edition1.indb 852016/12/12 10:06:02

4–88
When Driving
Drive Selection
Drive Selection
Drive selection is a system to switch the vehicle's drive mode. When the sport mode
is selected, vehicle's response against accelerator operation is enhance\
d. This provides
additional quick acceleration which may be needed to safely make maneuve\
rs such as lane
changes, merging onto freeways, or passing other vehicles.
CAUTION
Do not use the sport mode when driving on slippery roads such as wet or snow-covered
roads. It may cause tire slipping.

NOTE
  When the sport mode is selected, driving at higher engine speeds increases and it may
increase fuel consumption. Mazda recommends that you cancel the sport mode on normal
driving.
  Drive mode cannot be switched in the following conditions:   ABS/TCS/DSC is operating  The Mazda Radar Cruise Control (MRCC) system/cruise control is operating.  Steering wheel is being operated abruptly

Drive Selection Switch
Press the drive selection switch forward
(“
”) to select the sport mode.
Pull the drive selection switch back
(“
”) to cancel the sport mode.



NOTE
   When the ignition is switched off, the
sport mode is canceled.
  Depending on the driving conditions
when sport mode is selected, the vehicle
may perform shift-down or slightly
accelerate.

Select Mode Indication
When the sport mode is selected, the select
mode indication turns on in the instrument
cluster.


NOTE
If the drive selection cannot be switched
to sport mode, the select mode indication
fl ashes to notify the driver.

CX-5_8FN1-EA-16L_Edition1.indb 882016/12/12 10:06:03

4–91
When Driving
Power Steering
Power Steering
  Power steering is only operable when
the engine is running. If the engine is
off or if the power steering system is
inoperable, you can still steer, but it
requires more physical effort.
 If the steering feels stiffer than usual during normal driving or the steering
vibrates, consult an Authorized Mazda
Dealer.
  The warning indication/warning
light noti fi es the driver of system
abnormalities and operation conditions.
 In addition, the buzzer may also activate depending on the system abnormality or
operation condition.
 Refer to Warning Indication/Warning Lights on page 4-33 .
 Refer to Power Steering Warning Buzzer on page 7-42 .

CAUTION
Never hold the steering wheel to the
extreme left or right for more than
5 seconds with the engine running.
This could damage the power steering
system.

CX-5_8FN1-EA-16L_Edition1.indb 912016/12/12 10:06:04

4–123
When Driving
i-ACTIVSENSE
NOTE
  The Mazda Radar Cruise Control with Stop & Go function (MRCC with Stop & Go
function) system does not detect the following as physical objects.
  Vehicles approaching in the opposite direction  Pedestrians  Stationary objects (stopped vehicles, obstructions)  If a vehicle ahead is traveling at an extremely low speed, the system may not detect it
correctly.
  During headway control travel, do not set the system for detection of two-wheeled
vehicles such as motorcycles and bicycles.
  Do not use the Mazda Radar Cruise Control with Stop & Go function (MRCC with Stop
& Go function) system under conditions in which close proximity warnings are frequently
activated.
  During headway control travel, the system accelerates and decelerates your vehicle in
conjunction with the speed of the vehicle ahead. However, if it is necessary to accelerate
for a lane change or if the vehicle ahead brakes suddenly causing you to\
close in on the
vehicle rapidly, accelerate using the accelerator pedal or decelerate using the brake
pedal depending on the conditions.
  While the Mazda Radar Cruise Control with Stop & Go function (MRCC with Stop & Go
function) system is in use, it does not cancel even if the selector lev\
er is operated and any
intended engine braking does not occur. If deceleration is required, lower the set speed or
depress the brake pedal.
  The sound of the automatic brakes operating may be heard, however, it does not indicate
a problem.
  The brake lights turn on while the Mazda Radar Cruise Control with Stop & Go function
(MRCC with Stop & Go function) automatic braking is operating, however\
.

CX-5_8FN1-EA-16L_Edition1.indb 1232016/12/12 10:06:10