2017 MAZDA MODEL CX-5 change time

4–110
When Driving
i-ACTIVSENSE
Excessive Speed Warning
If the vehicle speed exceeds the speed limit sign displayed in the activ\
e driving display,
the area around the speed limit sign fl ashes three times in amber and the warning sound is
activated three times at the same time. If the vehicle speed continues t\
o exceed the displayed
speed limit sign, the indication stops fl ashing and remains on. Check the surrounding
conditions and adjust the vehicle speed to the legal speed using the app\
ropriate operation
such as depressing the brake pedal.

While 60 mph is displayed
50 mph is displayed
Active driving display indication
Active driving display indication

The excessive speed warning is initially set to inoperable. If you want \
to activate the
excessive speed warning, change the setting in the personalization featu\
res. In addition, the
warning pattern and the warning activation timing differ depending on the setting contents.
Refer to Personalization Features on page 9-11 .
Warning pattern
   Off: The excessive speed warning is not activated.  Visual: The area around the speed limit sign displayed in the display fl ashes three times
in amber, and if the vehicle speed continues to exceed the displayed speed limit\
sign, the
indication stops fl ashing and remains on.
   Audio & Visual: The area around the speed limit sign displayed in the display fl ashes
three times in amber and the warning sound is activated three times at t\
he same time. If
the vehicle speed continues to exceed the displayed speed limit sign, th\
e indication stops
fl ashing and remains on.

CX-5_8FN1-EA-16L_Edition1.indb 1102016/12/12 10:06:07

4–111
When Driving
i-ACTIVSENSE
Warning activation timing   0: If the vehicle speed exceeds the speed limit sign displayed in the displ\
ay, the
excessive speed warning is activated.
  5: If the vehicle speed exceeds the speed limit sign displayed in the displ\
ay by 5 km/h
(3 mph), the excessive speed warning is activated.
  10: If the vehicle speed exceeds the speed limit sign displayed in the displ\
ay by
10 km/h (6.2 mph), the excessive speed warning is activated.

NOTE
  In the following cases, the excessive speed warning stops operating.   The vehicle speed is less than the speed of the displayed speed limit si\
gn. (If the
activation timing for the excessive speed warning is changed in the pers\
onalization
features, the excessive speed warning stops operating when the vehicle speed i\
s less
than the changed vehicle speed.
  A speed limit sign indication has been updated and the vehicle speed is l\
ower than the
updated indication.
  Display of the speed limit sign stops.   The warning indication is displayed at the same time the excessive speed\
warning sound
is activated if the vehicle speed exceeds the speed indicated on the spe\
ed limit sign.
 Refer to Warning Sound is Activated on page 7-39 .  If the Forward Sensing Camera (FSC) incorrectly recognizes the actual speed limit sign
at a lower speed, the excessive speed alarm is activated even if the veh\
icle is driven at the
legal speed.

CX-5_8FN1-EA-16L_Edition1.indb 1112016/12/12 10:06:07

4–113
When Driving
i-ACTIVSENSE
Indication on Display
The Distance Recognition Support System (DRSS) operation status is indicated in the active
driving display or multi-information display. Regarding malfunctions, check the vehicle
conditions or have it inspected by an Authorized Mazda Dealer according to the content of
the displayed message.
Refer to Warning/Indicator Lights on page 4-32 .
NOTE
  When the ignition is switched off, the operation status before the system was turned off
is maintained. For example, if the ignition is switched off with the Dis\
tance Recognition
Support System (DRSS) operable, the system will be operable when the i\
gnition is
switched ON the next time.
  The Distance Recognition Support System (DRSS) can be turned on/off an\
d the system's
sensitivity can be changed.
 Refer to Personalization Features on page 9-11 .

CX-5_8FN1-EA-16L_Edition1.indb 1132016/12/12 10:06:07

4–130
When Driving
i-ACTIVSENSE
How to change the set vehicle speed
To accelerate/decelerate using the SET
switch
When you press the SET
switch, the
vehicle accelerates and when you press the
SET
switch, it decelerates.

Short press 1 km/h (1 mph)
Long press 10 km/h (5 mph)

NOTE
For example, the set vehicle speed is
changed by pressing the SET switch four
times as follows:
The vehicle speed accelerates or
decelerates by 4 km/h (4 mph).

To increase speed using accelerator
pedal
Depress the accelerator pedal and press
and release the SET
switch or SET
switch at the desired speed. If the switch is
not operated, the system returns to the set
speed after you release your foot from the
accelerator pedal.
CAUTION
The warnings and brake control do not
operate while the accelerator pedal is
depressed.

NOTE
   The setting speed can be changed by
operating the SET
switch or SET
switch during stop hold control.
   When accelerating using the SET
switch while in headway control, the set
vehicle speed can be adjusted but
acceleration is not possible. If there is
no longer a vehicle ahead, acceleration
continues until reaching the set vehicle
speed. For the set vehicle speed, check
the set vehicle speed indication in the
display.
   When depressing the accelerator pedal,
the inter-vehicle distance indication in
the display changes to the white-line
indication.

Canceling the system
When the following operations are
performed, the Mazda Radar Cruise
Control with Stop & Go function (MRCC
with Stop & Go function) system is
canceled, and the Mazda Radar Cruise
Control with Stop & Go function (MRCC
with Stop & Go function) set indicator
(green) switches to the Mazda Radar
Cruise Control with Stop & Go function
(MRCC with Stop & Go function) main
indicator (white) at the same time.
  The OFF/CAN switch is pressed.  The brake pedal is depressed.  The electric parking brake (EPB) is
applied.
   The selector lever is in the P (Park), N
(Neutral), or R (Reverse) position.
   Any of the doors is opened.  The driver's seat belt is unfastened.

CX-5_8FN1-EA-16L_Edition1.indb 1302016/12/12 10:06:12

4–137
When Driving
i-ACTIVSENSE
NOTE
  When the turn signal lever is operated for a lane change, the Lane-keep \
Assist System
(LAS) & Lane Departure Warning System (LDWS) is automatically disabled. The
Lane-keep Assist System (LAS) & Lane Departure Warning System (LDWS) becomes
operational again when the turn signal lever is returned and the system detects white
(yellow) lane lines while the vehicle is being driven normally within \
its vehicle lane.
  If the steering wheel, accelerator pedal, or brake pedal is operated abr\
uptly and the
vehicle moves close to a white (yellow) line, the system determines th\
at the driver is
making a lane change and the Lane-keep Assist System (LAS) & Lane Departure Warning
System (LDWS) operation is temporarily canceled. The Lane-keep Assist System (LAS)
& Lane Departure Warning System (LDWS) becomes operational again when the system
detects white (yellow) lane lines while the vehicle is being driven no\
rmally within its
vehicle lane.
  If the vehicle deviates from its lane repeatedly within a short period of time, the Lane-
keep Assist System (LAS) & Lane Departure Warning System (LDWS) may not operate.
  When white (yellow) lane lines are not detected, the Lane-keep Assist System (LAS) &
Lane Departure Warning System (LDWS) does not operate.
CX-5_8FN1-EA-16L_Edition1.indb 1372016/12/12 10:06:14

4–151
When Driving
i-ACTIVSENSE
Smart City Brake Support (SCBS) Indicator Light (Red)
If the Smart City Brake Support (SCBS) is
operating, the indicator light (red) fl ashes.



Collision Warning
If there is the possibility of a collision
with a vehicle ahead, the beep sounds
continuously and a warning is indicated in
the multi-information display or the active
driving display.

Multi-information Display
Active Driving Display

NOTE
The operation distance and volume of the
collision warning can be changed. Refer to
Personalization Features on page 9-11 .

Automatic Brake Operation
Display
“Smart City Brake Support Activated” is
indicated in the multi-information display
after the SCBS brakes or the brake assist
(SCBS brake assist) is operated.


NOTE
  The collision warning beep sounds
intermittently while the SCBS brake
or brake assist (SCBS brake assist) is
operating.
  If the vehicle is stopped by the SCBS
operation and the brake pedal is not
depressed, the warning beep sounds
one time after about 2 seconds and the
SCBS brake is automatically released.

CX-5_8FN1-EA-16L_Edition1.indb 1512016/12/12 10:06:16

4–159
When Driving
i-ACTIVSENSE
  In the following cases, the Forward Sensing Camera (FSC) may not be able to detect
target objects correctly.
  Under bad weather condition, such as rain, fog and snow.  The window washer is being used or the windshield wipers are not used when it's
raining.
  Ice, fog, snow, frost, rainfall, dirt, or foreign matter such as a plastic bag is stuck on
the windshield.
  Trucks with low loading platforms and vehicles with an extremely low or high pro fi le.   When driving next to walls with no patterning (including fences and lon\
gitudinally
striped walls).
  The taillights of the vehicle ahead are turned off.  A vehicle is outside the illumination range of the headlights.  The vehicle is making a sharp turn, or ascending or descending a steep s\
lope.  Entering or exiting a tunnel.  Heavy luggage is loaded causing the vehicle to tilt.  Strong light is shone at the front of the vehicle (back light or high-beam light from on-
coming vehicles).
  There are many light emitters on the vehicle ahead.  When the vehicle ahead is not equipped with taillights or the taillights\
are turned off at
nighttime.
  Elongated luggage or cargo is loaded onto installed roof rails and covers the Forward
Sensing Camera (FSC).
  Exhaust gas from the vehicle in front, sand, snow, and water vapor rising from
manholes and grating, and water splashed into the air.
  When towing a malfunctioning vehicle.  The vehicle is driven with tires having signi fi cantly different wear.   The vehicle is driven on down slopes or bumpy roads.  There are water puddles on the road.  The surroundings are dark such as during the night, early evening, or early morning,
or in a tunnel or indoor parking lot.
  The illumination brightness of the headlights is reduced or the headlight illumination
is weakened due to dirt or a deviated optical axis.
  The target object enters the blind spot of the Forward Sensing Camera (FSC).  A person or object bursts onto the road from the shoulder or cuts right in front of you.  You change lanes and approach a vehicle ahead.  When driving extremely close to the target object.  Tire chains or a temporary spare tire is installed.  The vehicle ahead has a special shape. For example, a vehicle towing a t\
railer house
or a boat, or a vehicle carrier carrying a vehicle with its front pointed rearward.

CX-5_8FN1-EA-16L_Edition1.indb 1592016/12/12 10:06:17

4–163
When Driving
i-ACTIVSENSE
CAUTION
Heed the following precautions to assure correct operation of each system.  Do not adhere stickers (including transparent stickers) to the surface of the radiator grille and front emblem in and around the radar sensor (front), and do not replace
the radiator grille and front emblem with any product that is not a genuine product
designed for use with the radar sensor (front).
 The radar sensor (front) includes a function for detecting soiling of the radar sensor's front surface and informing the driver, however, depending on the conditions, it may
require time to detect or it may not detect plastic shopping bags, ice or snow. If this
occurs, the system may not operate correctly, therefore always keep the radar sensor
(front) clean.
 Do not install a grille guard. If the front part of the vehicle has been damaged in a vehicle accident, the position of the radar sensor (front) may have moved. Stop the system immediately and always
have the vehicle inspected at an Authorized Mazda Dealer.
 Do not use the front bumper to push other vehicles or obstructions such as when pulling out of a parking space. Otherwise, the radar sensor (front) could be hit and its
position deviated.
 Do not remove, disassemble, or modify the radar sensor (front). For repairs, replacement or paint work around the radar sensor (front), consult an Authorized Mazda Dealer.
 Do not modify the suspension. If the suspension are modifi ed, the vehicle's posture could change and the radar sensor (front) may not be able to correctly detect a vehicle
ahead or an obstruction.

CX-5_8FN1-EA-16L_Edition1.indb 1632016/12/12 10:06:18