2017 MAZDA MODEL CX-5 change time

7–42
If Trouble Arises
Warning/Indicator Lights and Warning Sounds
*Some models.
Power Liftgate Warning Beep *
If system operation precautions are
necessary, the driver is notifi ed by the
warning sound.

Cautions What to check
The beep sounds 3 times The conditions required
for the power liftgate
to operate have not
been met, such as an
object being stuck in the
liftgate.
The beep sound
continues The vehicle is being
driven with the liftgate
open. Stop the vehicle
and close the liftgate.

Electric Parking Brake (EPB)
Warning Beep
The warning buzzer is activated under the
following conditions:
   The vehicle is driven with the electric
parking brake (EPB) applied.
   The electric parking brake (EPB) switch
is pulled while the vehicle is driven.

AUTOHOLD Warning Beep
Warning light fl ashes/message is
displayed and beep sound is activated
simultaneously for about fi ve seconds
when using AUTOHOLD function or
when AUTOHOLD switch is operated.
Because a problem with AUTOHOLD
function has occurred, AUTOHOLD
function does not operate even if
AUTOHOLD switch is operated.

If the warning light fl ashes/message is
displayed and the beep sound is activated
simultaneously, have your vehicle
inspected at an Authorized Mazda Dealer.
Power Steering Warning Buzzer
If the power steering system has
a malfunction, the power steering
malfunction light turns on or fl ashes and
the buzzer operates at the same time.
Refer to Warning Indication/Warning
Lights on page 4-33 .
Tire Infl ation Pressure Warning
Beep *
The warning beep sound will be heard
for about 3 seconds if the tire pressures
decrease.
If the tire pressure decreases extremely,
a beep sound will be heard for
approximately 30 seconds.
Refer to Tire Pressure Monitoring System
on page 4-172 .
Blind Spot Monitoring (BSM) Warning Beep *
Driving forward
The warning beep operates when the turn
signal lever is operated to the side where
the Blind Spot Monitoring (BSM) warning
light is illuminated.
NOTE
A personalized function is available to
change the Blind Spot Monitoring (BSM)
warning beep sound volume.
Refer to Personalization Features on page
9-11 .

Reversing
If a moving object such as a vehicle or
two-wheeled vehicle approaches on the
left or right from behind your vehicle, the
Blind Spot Monitoring (BSM) warning
sound is activated.
CX-5_8FN1-EA-16L_Edition1.indb 422016/12/12 10:07:29

7–43
If Trouble Arises
Warning/Indicator Lights and Warning Sounds
*Some models.
Lane Departure Warning Sound *
While the system is operating, if the
system determines that the vehicle may
depart from the lane, it sounds a warning
sound.
NOTE
  The volume of the Lane-keep Assist
System (LAS) & Lane Departure
Warning System (LDWS) warning sound
can be changed.
 Refer to Personalization Features on page 9-11 .
  The type of the Lane-keep Assist System
(LAS) & Lane Departure Warning
System (LDWS) warning sound can be
changed.
 Refer to Personalization Features on page 9-11 .

Collision warning *
If there is a possibility of a collision with
a vehicle ahead or an obstruction at the
rear of the vehicle, the warning light in the
instrument cluster fl ashes at the same time
as the warning indication is displayed in
the multi-information display or the active
driving display, and a warning sound is
activated intermittently.
Mazda Radar Cruise Control with Stop & Go function (MRCC with
Stop & Go function) System
Warnings
*
The Mazda Radar Cruise Control with
Stop & Go function (MRCC with Stop &
Go function) system warnings notify the
driver of system problems and precautions
on use when required. Check after hearing
a warning beep sound.

Warning beep What to check
While the Mazda Radar
Cruise Control with
Stop & Go function
(MRCC with Stop &
Go function) system is
operating, a single beep
sound is heard when
“Front radar blocked” is
displayed in the multi-
information display. Cancel the Mazda Radar
Cruise Control with
Stop & Go function
(MRCC with Stop &
Go function) system if
the radar sensor (front)
becomes dirty. Clean the
area around the radar
sensor (front).
The beep sounds
intermittently while the
vehicle is being driven. The distance between
your vehicle and the
vehicle ahead is too
close. Verify the safety
of the surrounding area
and reduce vehicle
speed.
While the Mazda Radar
Cruise Control with
Stop & Go function
(MRCC with Stop &
Go function) system is
operating, a single beep
sound is heard when
“Front radar sensor
system malfunction” is
displayed in the multi-
information display. A malfunction in the
system may be indicated.
Check the center display
to verify the problem
and then have your
vehicle inspected by
an Authorized Mazda
Dealer.

CX-5_8FN1-EA-16L_Edition1.indb 432016/12/12 10:07:29

8–43
Customer Information and Reporting Safety Defects
Declaration of Conformity
NOTE
During printing time of this user manual the approvals listed above are granted.
WARNING
Change or modifi cations not expressively approved by the party responsible for
compliance could void the use's authority to operate the equipment.

HomeLink Wireless Control System
CAUTION
HomeLink has been tested and complies with FCC and Industry Canada rules. Changes or
modifi cations not expressly approved by the party responsible for compliance could void
the user's authority to operate the device.

NOTE
FCC ID: NZLMOBHL4
CANADA:4112A-MOBHL4
This device complies with part 15 of the FCC Rules. Operation is subject\
to the following
two conditions:
1- This device may not cause harmful interference, and
2- This device must accept any interference received, including interference that may cause undesired operation.

Tire Pressure Monitoring System
NOTE
This device complies with part 15 of the FCC Rules. Operation is subject\
to the following
two conditions: (1) This device may not cause harmful interference, and (2) this device must
accept any interference received, including interference that may cause undesired operation.

Bluetooth ® Hands-Free
Type A
U.S.A. and Canada


CX-5_8FN1-EA-16L_Edition1.indb 432016/12/12 10:07:36

9–14
Specifi cations
Personalization Features
Item Feature Factory
Setting Available
Settings Settings
Change
Method


Vehicle
Door locks (page
3-17 ) Operation condition of auto lock/unlock
function Lock:
Driving, Unlock:
IGN Off Off/
Lock When Driving/
Lock: Driving, Unlock: IGN Off/
Lock When
Shifting Out Of P/
Lock: Shift From P,
Unlock: In P/
Lock: Driving, Unlock: In P A D


Keyless entry
system (page
3-3 ) Method for unlocking door using transmitter
Once:
Driver's,
Twice: All Doors Touch Once:
All Doors/
Once: Driver's, Twice: All Doors A E


Time for locking door automatically 60 seconds 90 seconds/
60 seconds/
30 seconds A —


Advanced keyless
entry system (page
3-10 ) Method for unlocking door using request
switch/transmitter
Once:
Driver's,
Twice: All Doors Touch Once:
All Doors/
Once: Driver's, Twice: All Doors A
E,
F

Time for locking door automatically 60 seconds 90 seconds/
60 seconds/
30 seconds A —


Auto-lock function operation/non-operational Off On/Off A —

Beep volume when locking/unlocking Medium High/
Medium/ Low/ Off A
E,
F

Illuminated entry
system (page
5-140 ) Time until interior lights turn off after
closing door
15 seconds 60 seconds/
30 seconds/
15 seconds/
7.5 seconds A —


Time until interior lights turn off
automatically when any door is not closed
completely 30 minutes 60 minutes/
30 minutes/
10 minutes A —


Auto-wiper control
(page 4-58 ) Operational/non-operational
On On/Off
*4 A —

CX-5_8FN1-EA-16L_Edition1.indb 142016/12/12 10:07:40

9–15
Specifi cations
Personalization Features
Item Feature Factory
Setting Available
Settings Settings
Change
Method


Daytime running
lights (page
4-56 ) Operational/non-operational
On On/Off — —


Auto headlight off
*5
(page 4-51 ) Time until headlights turn off
30 seconds 120 seconds/
90 seconds/
60 seconds/
30 seconds/ 0 seconds
*6 A —


Auto-light control
(page 4-51 ) Timing by which lights turn on
Medium Light/
Medium Light/ Medium/
Medium Dark/ Dark A —


High Beam Control
System (HBC)
(page 4-96 ) Operational/non-operational
*1
On On/Off A —

Adaptive Front
Lighting System
(AFS) (page
4-95 ) Operational/non-operational
*1
On On/Off A —

Lights-on
reminder
*7 (page
7-39 ) Warning beep volume
High High/Low/Off A —

Coming home light
(page 4-55 ) Time until headlights turn off
30 seconds 120 seconds/
90 seconds/
60 seconds/
30 seconds/ Off A —


Leaving home light
(page 4-55 ) Operational/non-operational
On On/Off A —


Turn signal
indicator (page
4-57 ) Beep volume
High High/Low A —


Three-fl ash turn
signal (page
4-58 ) Operational/non-operational
On On/Off A —


Rear window
defogger (page
4-62 ) The operation time for the rear window
defogger can be changed.
15 minutes 15 minutes/
Continuous
*8 — —

System
Language Language indicated in display English Depends on
market
*9 A —

Temperature Temperature unit indicated in display °F or °C °F/°C A —

Distance Distance unit indicated in display mi or km mi/km A —


CX-5_8FN1-EA-16L_Edition1.indb 152016/12/12 10:07:41

9–16
Specifi cations
Personalization Features
Item Feature Factory
Setting Available
Settings Settings
Change
Method


Fuel Economy Monitor (page 4-86 )
Ending display Display/non-display Off On/Off B —


Fuel economy
resetting procedure Linkage/non-linkage with fuel economy reset
and trip meter A reset
Off On/Off B —


Active Driving Display (page 4-28 )
Display Setting can be changed so that the Active
Driving Display is not displayed.
On On/Off C —


The display height (up/down position) can
be changed. 0 13 steps up/
down from
initial setting
(total: 27 steps) C —


The method for adjusting the display
brightness (automatically/manually) can be
changed. AUTO
AUTO/
MANUAL C —


The standard brightness while automatic
adjustment is selected can be changed using
the brightness adjustment. 0 2 steps up/
down from
initial setting
(total: 5 steps) C —


The standard brightness while manual
adjustment is selected can be changed using
the brightness adjustment. 0 20 steps up/
down from
initial setting
(total: 41 steps) C —


The display angle can be changed. 0 3steps up/down
from initial setting
(total: 7steps) C —


Navigation
guidance Display/non-display
On On/Off C —


Street Information Display/non-display On-Demand Off/Always/
On-Demand C —


*1 Though these systems can be turned Off, doing so will defeat the purpose of the system and Mazda recommends that these systems remain On.
*2 Only the volume of the warning beep during Blind Spot Monitoring (BSM)\
operation can be changed. The volume of the warning beep during Rear Cross Traf fi c Alert (RCTA) operation cannot be changed.
*3 This system functions only when the navigation system is functioning.
*4 If the auto-wiper control is set to Off, the wiper lever
position is set to intermittent operation.
*5 If the setting is changed to Off, the following operation is performed according to the headlight switc\
h position:
 At position: Headlights turn off immediately after the ignition is switched off.
 At any position other than : Headlights on/off conditions vary according to the headlight switch
position. Refer to Headlights on page 4-51 .
*6 When set to Off, the lights-on reminder is operable.
*7 The lights-on reminder settings can be changed at anytime, however, the lights-on reminder only operates when
the auto headlight function is set to Off. Refer to Lights-On Reminder on page 7-39 .
CX-5_8FN1-EA-16L_Edition1.indb 162016/12/12 10:07:41

9–17
Specifi cations
Personalization Features
*8 The operation may stop in 15 minutes due to the effect of the outside temperature even if the operation time of
the rear window defogger has been changed to Continuous.
*9 Available only in display from the center display.



CX-5_8FN1-EA-16L_Edition1.indb 172016/12/12 10:07:42