Page 248 of 664
4–104
When Driving
i-ACTIVSENSE
Canceling Operation of Blind Spot Monitoring (BSM)
The Blind Spot Monitoring (BSM)system
can be set to inoperable.
Refer to Personalization Features on page
9-11 .
When the Blind Spot Monitoring (BSM)
is set to inoperable, the Blind Spot
Monitoring (BSM) and Rear Cross Traffi c
Alert (RCTA) systems are turned off and
the Blind Spot Monitoring (BSM) OFF
indicator light in the instrument cluster
turns on.
NOTE
When the ignition is switched OFF, the
system status before it was turned off is
maintained. For example, if the ignition
is switched OFF while the Blind Spot
Monitoring (BSM) and Rear Cross Traffi c
Alert (RCTA) systems are operational, the
Blind Spot Monitoring (BSM) and Rear
Cross Traffi c Alert (RCTA) systems remain
operational the next time the ignition is
switched ON.
CX-5_8FN1-EA-16L_Edition1.indb 1042016/12/12 10:06:06
Page 251 of 664

4–107
When Driving
i-ACTIVSENSE
NOTE
The Traffi c Sign Recognition System (TSR) does not operate if there is a malfunction in
the Forward Sensing Camera (FSC).
Under the following conditions, the Traf fi c Sign Recognition System (TSR) may not
operate normally.
An object placed on the dashboard is re fl ected in the windshield and picked up by the
camera.
Heavy luggage is loaded in the luggage compartment or on the rear seat and the
vehicle is tilted.
The tire pressures are not adjusted to the speci fi ed pressure. Tires other than standard tires are equipped. The vehicle is driven on the ramp and surrounding area to or from a rest area or a
tollgate on a highway.
When surrounding brightness suddenly changes such as when entering or exiting a
tunnel.
The illumination of the headlights is weakened because of dirt or the op\
tical axis is
deviated.
The windshield is dirty or foggy. The windshield and camera are fogged (water droplets). Strong light is directed at the front of the vehicle (such as backlight or high-beam
headlights of on-coming vehicles).
The vehicle is making a sharp turn. Strong light re fl ects off the road. A traffi c sign is in a position which makes it dif fi cult to re fl ect the light from the
vehicle's headlights, such as when the vehicle is driven at night or in \
a tunnel.
The vehicle is driven under weather conditions such as rain, fog, or sno\
w. The stored map data for the navigation system is not current. A traffi c sign is obscured by mud or snow. A traffi c sign is concealed by trees or a vehicle. A traffi c sign is partially shaded. A traffi c sign is bent or warped. A traffi c sign is too low or too high. A traffi c sign is too bright or too dark (including electronic traf fi c signs). A traffi c sign is too big or too small. There is an object similar to the traf fi c sign being read (such as another traf fi c sign or
other signs resembling it).
The Traffi c Sign Recognition System (TSR) does not operate if the active drivin\
g display
is set to non-display.
The Traffi c Sign Recognition System (TSR) can be set to inoperable. Refer to Personalization Features on page 9-11 .
CX-5_8FN1-EA-16L_Edition1.indb 1072016/12/12 10:06:06
Page 257 of 664
4–113
When Driving
i-ACTIVSENSE
Indication on Display
The Distance Recognition Support System (DRSS) operation status is indicated in the active
driving display or multi-information display. Regarding malfunctions, check the vehicle
conditions or have it inspected by an Authorized Mazda Dealer according to the content of
the displayed message.
Refer to Warning/Indicator Lights on page 4-32 .
NOTE
When the ignition is switched off, the operation status before the system was turned off
is maintained. For example, if the ignition is switched off with the Dis\
tance Recognition
Support System (DRSS) operable, the system will be operable when the i\
gnition is
switched ON the next time.
The Distance Recognition Support System (DRSS) can be turned on/off an\
d the system's
sensitivity can be changed.
Refer to Personalization Features on page 9-11 .
CX-5_8FN1-EA-16L_Edition1.indb 1132016/12/12 10:06:07
Page 261 of 664
4–117
When Driving
i-ACTIVSENSE
*Some models.
Rear Cross Traffi c Alert (RCTA) *
The Rear Cross Traf fi c Alert (RCTA)system is designed to assist the driver in checking the
area to the rear of the vehicle on both sides while the vehicle is rever\
sing by alerting the
driver to the presence of vehicles approaching the rear of the vehicle.
The Rear Cross Traf fi c Alert (RCTA) system detects vehicles approaching from the left
and right sides of the vehicle while the vehicle is being reversed out o\
f a parking space,
and notifi es the driver of possible danger using the Blind Spot Monitoring (BSM)\
warning
indicator lights and the warning buzzer.
Detection areas
Your vehicle
CX-5_8FN1-EA-16L_Edition1.indb 1172016/12/12 10:06:09
Page 262 of 664

4–118
When Driving
i-ACTIVSENSE
Rear Cross Traffi c Alert (RCTA) operation
1. The Rear Cross Traffi c Alert (RCTA) system operates when the selector lever is shifted
to the reverse (R) position.
2. If there is the possibility of a collision with an approaching vehicle, \
the Blind Spot Monitoring (BSM) warning indicator lights fl ashes and the warning beep is activated
simultaneously.
(With rear view monitor)
The Rear Cross Traffi c Alert (RCTA) warning indication in the rearview monitor also
synchronizes with the Blind Spot Monitoring (BSM) warning indicator li\
ght on the door
mirrors.
(With rear view monitor)
WARNING
Always check the surrounding area visually before actually putting the vehicle in
reverse: The system is only designed to assist you in checking for vehicles at the rear when putting
the vehicle in reverse. Due to certain limitations with the operation of this system, the
Blind Spot Monitoring (BSM) warning indicator lights may not fl ash or it might be delayed
even though a vehicle is behind your vehicle. Always make it your responsibility as a
driver to check the rear.
CX-5_8FN1-EA-16L_Edition1.indb 1182016/12/12 10:06:09
Page 263 of 664
4–119
When Driving
i-ACTIVSENSE
NOTE
In the following cases, the Blind Spot Monitoring (BSM) OFF indicator \
light turns on and
operation of the system is stopped. If the Blind Spot Monitoring (BSM)\
OFF indicator
light remains illuminated, have the vehicle inspected at an Authorized Mazda Dealer as
soon as possible.
Some problem with the system including the Blind Spot Monitoring (BSM) warnin\
g
indicator lights has occurred.
A large deviation in the installation position of a radar sensor (rear) on the vehicle has
occurred.
There is a large accumulation of snow or ice on the rear bumper near a radar sensor
(rear).
Driving on snow-covered roads for long periods. The temperature near the radar sensors becomes extremely hot due to driving for long
periods on slopes during the summer.
The battery voltage has decreased.
CX-5_8FN1-EA-16L_Edition1.indb 1192016/12/12 10:06:09
Page 264 of 664

4–120
When Driving
i-ACTIVSENSE
Under the following conditions, the radar sensors (rear) cannot detect target objects or it
may be dif fi cult to detect them.
The vehicle speed when reversing is about 15 km/h (9 mph) or faster. The radar sensor (rear) detection area is obstructed by a nearby wall or parked
vehicle. (Reverse the vehicle to a position where the radar sensor detection area is no
longer obstructed.)
Your vehicle
A vehicle is approaching directly from the rear of your vehicle.
Your vehicle
The vehicle is parked on a slant.
Your vehicle
Directly after the Blind Spot Monitoring (BSM) system becomes operable. Radio wave interference from a radar sensor equipped on a nearby parked vehicle. In the following cases, it may be dif fi cult to view the illumination/ fl ashing of the Blind
Spot Monitoring (BSM) warning indicator lights equipped on the door mi\
rrors.
Snow or ice adheres to the door mirrors. The front door glass is fogged or covered in snow, frost or dirt. Turn off the Rear Cross Traffi c Alert (RCTA) system while pulling a trailer or while an
accessory such as a bicycle carrier is installed to the rear of the vehicle. Otherwise,
the radio waves emitted by the radar will be blocked causing the system \
to not operate
normally.
CX-5_8FN1-EA-16L_Edition1.indb 1202016/12/12 10:06:09
Page 267 of 664

4–123
When Driving
i-ACTIVSENSE
NOTE
The Mazda Radar Cruise Control with Stop & Go function (MRCC with Stop & Go
function) system does not detect the following as physical objects.
Vehicles approaching in the opposite direction Pedestrians Stationary objects (stopped vehicles, obstructions) If a vehicle ahead is traveling at an extremely low speed, the system may not detect it
correctly.
During headway control travel, do not set the system for detection of two-wheeled
vehicles such as motorcycles and bicycles.
Do not use the Mazda Radar Cruise Control with Stop & Go function (MRCC with Stop
& Go function) system under conditions in which close proximity warnings are frequently
activated.
During headway control travel, the system accelerates and decelerates your vehicle in
conjunction with the speed of the vehicle ahead. However, if it is necessary to accelerate
for a lane change or if the vehicle ahead brakes suddenly causing you to\
close in on the
vehicle rapidly, accelerate using the accelerator pedal or decelerate using the brake
pedal depending on the conditions.
While the Mazda Radar Cruise Control with Stop & Go function (MRCC with Stop & Go
function) system is in use, it does not cancel even if the selector lev\
er is operated and any
intended engine braking does not occur. If deceleration is required, lower the set speed or
depress the brake pedal.
The sound of the automatic brakes operating may be heard, however, it does not indicate
a problem.
The brake lights turn on while the Mazda Radar Cruise Control with Stop & Go function
(MRCC with Stop & Go function) automatic braking is operating, however\
.
CX-5_8FN1-EA-16L_Edition1.indb 1232016/12/12 10:06:10