2017 MAZDA MODEL CX-5 cruise control

▼Adjustable Speed Limiter (ASL) Display
The setting status of the ASL is
displayed in the active driving display (vehicles with active
driving display) or the displa y in the instrument cluster.
Stand-by display
Displays when the spee d limiter switch is operated and the system is turned on.
Turns off when the system is turned off.

Active Driving Display With Multi- information DisplayWithout Multi-
information Display
Setting display
With cruise control
Displays when the SET
switch is operated
and the speed is set.
With Mazda Radar Cruise Control (MRCC) or Mazda Radar Cruise Co ntrol with
Stop & Go function (MRCC with Stop & Go function)
Displays when the SET
or SET switch is operated an d the speed is set.

Active Driving Display With Multi-
information DisplayWithout Multi-
information Display
Cancel display
Displays when any of the follo
wing operations is done and the s ystem is temporarily
cancelled.
•OFF/CAN switch is operated
•Accelerator pedal is strongly depressed

Active Driving Display With Multi- information DisplayWithout Multi-
information Display
When Driving
i-ACTIVSENSE
4-176
2017-6-7 7:51:19 Form No. CX-5 8FY4-EE-17E+L_Edition2

CAUTION
(With cruise control)
If the set speed is set lower than the current vehicle speed by pressing the SET
or RES/
switch, the warning beep is not activated for about 30 seconds even if the vehicle speed is
faster than the newly set speed by 5 km/h (3 mph). Be careful not to drive over the set speed.
(With Mazda Radar Cruise Control (MRCC) or Mazda Radar Cruise Control with Stop & Go
function (MRCC with Stop & Go function))
If the set speed is set lower than the current vehicle speed by pressing the SET
or RES switch,
the warning beep is not activated for about 30 se conds even if the vehicle speed is faster than
the newly set speed by 5 km/h (3 mph). Be careful not to drive over the set speed.
NOTE
When the system is temporarily cancelled by depressing the accelerator pedal fully, the ASL
display shows the cancel display. If the vehicle speed exceeds the set speed by about 5 km/h
(3 mph) or more while the cancel display is displayed, the set speed display flashes but the
warning sound is not operated.
▼ Activation/Deactivation
NOTE
When the ignition is switched of
f, the system status before it was turned off is maintained.
For example, if the ignition is switched off while the ASL is operating, the system will be
operable when the ignition is switched ON the next time.
Activation
Press the MODE switch to operate the system. The ASL screen is displayed, and the ASL
main indication displays in white.
NOTE
When the cruise control, Mazda Radar Cruise Control (MRCC), or Mazda Radar Cruise
Control with Stop & Go function (MRCC with Stop & Go function) system becomes
operable after pressing the MODE switch, press the mode switch again to switch to the ASL.
Deactivation
To deactivate the system, do the following operations:
When a cruising speed h as been set (ASL set indication displays in green)
Long-press the OFF/CAN switch or press the OFF/CAN switch 2 times. The ASL screen is
no longer displayed and the ASL set indication (green) does not display.
When Driving
i-ACTIVSENSE
4-178
2017-6-7 7:51:19 Form No. CX-5 8FY4-EE-17E+L_Edition2

When a cruising speed has not been set (ASL main indication displays in white)
Press the OFF/CAN switch. The ASL screen is no longer displayed and the ASL main
indication (white) does not display.
NOTE
When the MODE switch is presse d while the ASL is operating, the system switches to the
cruise control, Mazda Radar Cruise Control (MRCC), or Mazda Radar Cruise Control with
Stop & Go function (M RCC with Stop & Go function) system.
▼Setting the System
WA R N I N G
Always verify the safety of the surrounding area when setting the ASL:
If the speed is set lower than the current vehicle speed, the vehicle speed is decreased to the
set speed. Verify the safety of the surroundi
ng area and keep a safer distance between
vehicles ahead and behind you.
1. Press the MODE switch to turn the system on.
2. (With cruise control)
Press the SET
to set the speed. When the current vehicle speed is 30 km/h (2 0 mph) or
more, the speed is set to the cu rrent vehicle speed. When the c urrent vehicle speed is less
than 30 km/h (20 mph), the speed is set to 30 km/h (20 mph).
(With Mazda Radar Cruise Control (MRCC) or Mazda Radar Cruise C ontrol with
Stop & Go function (MRCC with Stop & Go function))
Press the SET
or SET to set the speed. When the current vehicle speed is 30 km/h
(20 mph) or more, the speed is set to the current vehicle speed . When the current vehicle
speed is less than 30 km/h (20 mph), the speed is set to 30 km/ h (20 mph).
3. (With cruise control)
To increase the set speed, press the RES
switch continuously. The set speed can be
adjusted in 10 km/h (5 mph) increments. The set speed can also be adjusted in about 1
km/h (1 mph) increments by pressing the RES
switch momentary. For example, the set
speed increases about 4 km/h (4 mph) by pressing the RES
switch 4 times.
(With Mazda Radar Cruise Control (MRCC) or Mazda Radar Cruise C ontrol with
Stop & Go function (MRCC with Stop & Go function))
To increase the set speed, press the SET
switch continuously. The set speed can be
adjusted in 10 km/h (5 mph) increments. The set speed can also be adjusted in about 1
km/h (1 mph) increments by pressing the SET
switch momentary. For example, the set
speed increases about 4 km/h (4 mph) by pressing the SET
switch 4 times.
When Driving
i-ACTIVSENSE
4-179
2017-6-7 7:51:19 Form No. CX-5 8FY4-EE-17E+L_Edition2

4. To decrease the set speed, press the SET switch continuously. The set speed can be
adjusted in 10 km/h (5 mph) decrements. The set speed can also be adjusted in about 1
km/h (1 mph) increments by pressing the SET
switch momentary. For example, the set
speed decreases about 4 km/h (4 mph) by pressing the SET
switch 4 times.
NOTE
•(With cruise control)
When the vehicle set speed is displayed in the instrument cluster, press the RES/
switch
to set the displayed vehicle speed.
(With Mazda Radar Cruise Control (MRCC) or Mazda Radar Cruise Control with Stop
& Go function (MRCC with Stop & Go function))
When the vehicle set speed is displayed in the instrument cluster, press the RES switch to
set the displayed vehicle speed.
•The system is temporarily cancelled when the vehicle is accelerated by depressing the
accelerator pedal strongly, however, it resumes when the vehicle speed decreases to the
set speed or less.
•The vehicle speed may exceed the set speed on a down slope.
▼ Temporarily Cancelling the System
The system is temporarily cancelled (stand-by status) when any
of the following operations
is done while the ASL is displayed.
•OFF/CAN switch is pressed
•Accelerator pedal is strongly depressed
With cruise control
Press the RES/
switch to resume the operation at the previous set speed. The ASL display
remains displayed.
With Mazda Radar Cruise Control (MRCC) or Mazda Radar Cruise Co ntrol with
Stop & Go function (MRCC with Stop & Go function)
Press the RES switch to resume the operation at the previous se t speed. The ASL display
remains displayed.
NOTE
•(With cruise control)
The set speed can be set by pressing the SET
switch while the system is in stand-by
status.
(With Mazda Radar Cruise Control (MRCC) or Mazda Radar Cruise Control with Stop
& Go function (MRCC with Stop & Go function))
The set speed can be set by pressing the SET
or SET switch while the system is in
stand-by status.
•The ASL is not cancelled by depressing the brake pedal.
When Driving
i-ACTIVSENSE
4-180
2017-6-7 7:51:19 Form No. CX-5 8FY4-EE-17E+L_Edition2

Forward Sensing Camera (FSC)*
Your vehicle is equipped with a Forward Sensing Camera (FSC). The Forward Sensing
Camera (FSC) is positioned near t he rearview mirror and used by the following systems.
•High Beam Control System (HBC)
•Adaptive LED Headlights (ALH)
•Driver Attention Alert (DAA)
•Lane-keep Assist System (LAS) & Lane Departure Warning System ( LDWS)
•Traffic Sign Recognition System (TSR)
•Advanced Smart City Brake Support (Advanced SCBS)
•Smart City Brake Support [Forward] (SCBS F)
•Mazda Radar Cruise Control with S top & Go function (MRCC with Stop & Go function)
•Smart Brake Support (SBS)
Forward Sensing Camera (FSC)
The Forward Sensing Camera (FSC) determines the conditions ahea d of the vehicle while
travelling at night and detects traffic lanes. The distance in which the Forward Sensing
Camera (FSC) can detect objects v aries depending on the surrounding conditions.
WA R N I N G
Do not modify the suspension:
If the vehicle height or inclination is changed, the system will not be able to correctly detect
vehicles ahead. This will result in the system not operating normally or mistakenly operating,
which could cause a serious accident.
CAUTION
 Do not apply accessories, stickers or film to the windscreen near the Forward Sensing
Camera (FSC).
When Driving
i-ACTIVSENSE
4-196*Some models.
2017-6-7 7:51:19 Form No. CX-5 8FY4-EE-17E+L_Edition2

If the area in front of the Forward Sensing Camera (FSC) lens is obstructed, it will cause the
system to not operate correctly. Consequently, each system may not operate normally
which could lead to an unexpected accident.
 Do not disassemble or modify th e Forward Sensing Camera (FSC).
Disassembly or modification of the Forward Sensing Camera
(FSC) will cause a malfunction
or mistaken operation. Consequently, each sy stem may not operate normally which could
lead to an unexpected accident.
 Heed the following cautions to assure the co rrect operation of the Forward Sensing Camera
(FSC).
 Be careful not to scratch the Forward Sensing Camera (FSC) lens or allow it to get dirty.
 Do not remove the Forward Sensing Camera (FSC) cover.
 Do not place objects on the inst rument panel which reflect light.
 Always keep the windscreen glass around the camera clean by removing dirt or fogging.
Use the windscreen defroster to remove fogging on the windscreen.
 Consult an expert repairer, we recommend an Authorised Mazda Repairer regarding
cleaning the interior side of the windscre en around the Forward Sensing Camera (FSC).
 Consult an expert repairer, we recommend an Authorised Mazda Repairer before
performing repairs around the Forward Sensing Camera (FSC).
 The Forward Sensing Camera (FSC) is installed to the windscreen. Consult an expert
repairer, we recommend an Authorised Ma zda Repairer for windscreen repair and
replacement.
 When cleaning the windscreen, do not a llow glass cleaners or similar cleaning
fluids to
get on the Forward Sensing Camera (FSC) le ns. In addition, do not touch the Forward
Sensing Camera (FSC) lens.
 When performing repairs around the rearvi ew mirror, consult an expert repairer, we
recommend an Authorised Mazda Repairer.
 Consult an expert repairer, we recommend an Authorised Mazda Repairer regarding
cleaning of the camera lens.
 Do not hit or apply strong force to the Forward Sensing Camera (FSC) or the area around
it. If the Forward Sensing Camera (FSC) is severely hit or if there are cracks or damage
caused by flying gravel or debris in the area around it, stop using the following systems
and consult an expert repairer, we rec ommend an Authorised Mazda Repairer.
 High Beam Control System (HBC)
 Adaptive LED Headlights (ALH)
 Driver Attention Alert (DAA)
 Lane-keep Assist System (LAS) & Lane Departure Warning System (LDWS)
 Traffic Sign Recognition System (TSR)
 Advanced Smart City Brake Support (Advanced SCBS)
 Smart City Brake Support [Forward] (SCBS F)
 Mazda Radar Cruise Control with Stop & Go function (MRCC with Stop & Go function)
When Driving
i-ACTIVSENSE
4-197
2017-6-7 7:51:19 Form No. CX-5 8FY4-EE-17E+L_Edition2

•Elongated luggage or cargo is loaded onto installed roof rails and covers the Forward
Sensing Camera (FSC).
•Exhaust gas from the vehicle in front, sand, snow, and water vapour rising from
manholes and grating, and water splashed into the air.
•When towing a malfunctioning vehicle.
•The vehicle is driven with tyres having significantly different wear.
•The vehicle is driven on down slopes or bumpy roads.
•There are water puddles on the road.
•The surroundings are dark such as during the night, early evening, or early morning, or
in a tunnel or indoor parking lot.
•The illumination brightness of the headlights is reduced or the headlight illumination is
weakened due to dirt or a deviated optical axis.
•The target object enters the blind spot of the Forward Sensing Camera (FSC).
•A person or object bursts onto the road from the shoulder or cuts right in front of you.
•You change lanes and approach a vehicle ahead.
•When driving extremely close to the target object.
•Tyre chains or a temporary spare tyre is installed.
•The vehicle ahead has a special shape. For example, a vehicle towing a trailer house or
a boat, or a vehicle carrier carrying a vehicle with its front pointed rearward.
•If the Forward Sensing Camera (FSC) cannot operate normally due to backlight or fog,
the system functions related to the Forward Sensing Camera (FSC) are temporarily
stopped and the following warning lights turn on. However, this does not indicate a
malfunction.
•High Beam Control System (HBC) warning light (amber)
•Adaptive LED Headlights (ALH) warning light (amber)
•Lane-keep Assist System (LAS) & Lane Departure Warning System (LDWS) warning
light
•Mazda Radar Cruise Control with Stop & Go function (MRCC with Stop & Go
function) warning indication
•Smart Brake Support/Smart City Brake Support (SBS/SCBS) warning light (amber)
•If the Forward Sensing Camera (FSC) cannot operate normally due to high temperatures,
the system functions related to the Forward Sensing Camera (FSC) are temporarily
stopped and the following warning lights turn on. However, this does not indicate a
malfunction. Cool down the area around the Forward Sensing Camera (FSC) such as by
turning on the air conditioner.
•High Beam Control System (HBC) warning light (amber)
•Adaptive LED Headlights (ALH) warning light (amber)
When Driving
i-ACTIVSENSE
4-199
2017-6-7 7:51:19 Form No. CX-5 8FY4-EE-17E+L_Edition2

•Lane-keep Assist System (LAS) & Lane Departure Warning System (LDWS) warning
light
•Mazda Radar Cruise Control with Stop & Go function (MRCC with Stop & Go
function) warning indication
•Smart Brake Support/Smart City Brake Support (SBS/SCBS) warning light (amber)
•If the Forward Sensing Camera (FSC) detects that the windscreen is dirty or foggy, the
system functions related to the Forward Sensing Camera (FSC) are temporarily stopped
and the following warning lights turn on. Ho wever, this does not indicate a problem.
Remove the dirt from the windscreen or press the defroster switch and defog the
windscreen.
•High Beam Control System (HBC) warning light (amber)
•Adaptive LED Headlights (ALH) warning light (amber)
•Lane-keep Assist System (LAS) & Lane Departure Warning System (LDWS) warning
light
•Mazda Radar Cruise Control with Stop & Go function (MRCC with Stop & Go
function) warning indication
•Smart Brake Support/Smart City Brake Support (SBS/SCBS) warning light (amber)
•If there are recognizable cracks or damage caused by flying gravel or debris on the
windscreen, always have the windscreen replaced. Consult an Authorised Mazda Repairer
for replacement.
•(With Advanced Smar t City Brake Support (Advanced SCBS))
•The Forward Sensing Camera (FSC) recognises pedestrians when all of the following
conditions are met:
•The height of a pedestrian is about 1 to 2 meters.
•An outline such as the head, both shoulders, or the legs can be determined.
•In the following cases, the Forward Sensing Camera (FSC) may not be able to detect
target objects correctly:
•Multiple pedestrians are walking, or there are groups of people.
•A pedestrian is close to a separate object.
•A pedestrian is crouching, lying, or slouching.
•A pedestrian suddenly jumps into the road right in front of the vehicle.
•A pedestrian opens an umbrella, or is carrying large baggage or articles.
•A pedestrian is in a dark location such as during the night, or blends into the
background by wearing clothes matching the background colour.
When Driving
i-ACTIVSENSE
4-200
2017-6-7 7:51:19 Form No. CX-5 8FY4-EE-17E+L_Edition2