2017 MAZDA MODEL CX-5 cooling

*2 Flexible setting can be set if the vehicle is operated mainly where none of the following conditions apply.
a) Purpose of vehicle use is police car, taxi or driving school car.
b) Driving in dusty conditions
c) Extended periods of idli ng or low speed operation
The vehicle calculates the remaining oil life based on engine o perating conditions and lets you know when an
oil change is due by illuminating the wrench indicator light in the instrument cluster.
Replace the engine oil and filter when message/wrench indicator light is ON. And they must be changed at
least once a year or within 10,00 0 km since last engine oil and filter change.
The system must be reset whenever replacing the engine oil rega rdless of the message/wrench indicator light
display.
*3 If the vehicle is operated prim arily under any of the following conditions, replace the engine oil and oil filter at
every 5,000 km or 6 months.
a) Purpose of vehicle use is police car, taxi or driving school car.
b) Driving in dusty conditions
c) Extended periods of idli ng or low speed operation
d) Driving for long period in cold temperatures or driving regul arly at short distance only
e) Driving in extremely hot conditions
f) Driving in mountainous conditions continually
*4 For SKYACTIV-D 2.2, reset the e ngine oil data whenever replacing the engine oil regardless of the message/
wrench indicator light display.
*5 Implement the fuel injection amount correction.*6 If the vehicle is operated in v ery dusty or sandy areas, clean the air filter at every 5,000 km or 6 months.*7 Use of FL-22 is recommended when replacing engine coolant. Using engine coolant other than FL-22 may
cause serious damage to the engine and cooling system.
*8 Inspect the battery electrolyte level, specific gravity and outer appearance. The sealed battery only requires an
outer appearance inspection.
*9 If the brakes are used extensively (for example, continuous ha rd driving or mountain driving) or if the vehicle
is operated in extremely humid c limates, replace the brake fluid annually.
*10 If this component has been submerged in water, the oil should be replaced.*11 Tyre rotation is recommended every 10,000 km.*12 Check the tyre repair fluid e xpiration date every year when performing the periodic maintenance. Replace the
tyre repair fluid bottle with new one before the expiration date.

Maintenance and Care
Scheduled Maintenance
6-12
2017-6-7 7:51:19 Form No. CX-5 8FY4-EE-17E+L_Edition2

Maintenance Inter-val Number of months or kilometres (miles), whichever comes first
Months 6 121824303642485460667278849096
×1000 km 10 20 30 40 50 60 70 80 90 100 110 120 130 140 150 160
×1000 miles
6.25 12.518.752531.2537.543.755056.2562.568.757581.2587.593.75100
Engine oil filter
*1
Except be-
low coun-
tries RRRRRRRRRRRRRRRR
Malaysia/
Philippines Replace every 10,000 km (6
,250 miles) or 1 year.
Fuel filter Except be-
low coun-
tries
RRRR
Malaysia/
Philippines RRRRRRRR
Fuel injection system
*4III
SKYACTIV-G 2.0, SKYACTIV-G 2.5, AND SKYACTIV-D 2.2
Drive belts
*5IIIIIIIIIIIIIIII
Cooling system IIIIIIII
Engine coolant
*6Replace at first 200,000 km (125, 000 miles) or 10 years; after that, every
100,000 km (62,500 miles) or 5 years.
Air filter
*7
Except be-
low coun-
tries CCRCCRCC
Georgia/
Armenia CRCRCRCR
Fuel lines and hoses IIIIIIII
Battery
*8IIIIIIII
Brake lines, hoses and connections I I I I I I I I
Brake fluid
*9IIIRIIIRIIIRIIIR
Parking brake IIIIIIIIIIIIIIII
Power brake unit (Brake booster)
and hoses IIIIIIII
Disc brakes IIIIIIIIIIIIIIII
Steering operation and linkages I I I I I I I I
Manual transaxle oil R
Rear differential oil
*10
Transfer oil*10
Front and rear suspension, ball
joints and wheel bearing axial play IIIIIIII
D riv esh aft d ust b o o ts IIII
Exhaust system and heat shields Inspect every 80,000 km (50,000 miles).
Maintenance and Care
Scheduled Maintenance
6-14
2017-6-7 7:51:19 Form No. CX-5 8FY4-EE-17E+L_Edition2

*5 Also inspect the air conditioner drive belts, if installed.If the vehicle is operated primarily under any of the following conditions, inspect the drive belts more often
than the recommended intervals.
a) Driving in dusty conditions
b) Extended periods of idli ng or low speed operation
c) Driving for long period in cold temperatures or driving regularly at short distance only
d) Driving in extremely hot conditions
e) Driving in mountainous conditions continually
*6 Use of FL-22 is recommended when replacing engine coolant. Using engine coolant other than FL-22 may
cause serious damage to the engine and cooling system.
*7 If the vehicle is operated in v ery dusty or sandy areas, clean and if necessary, replace the air filter more often
than the recommended intervals.
*8 Inspect the battery electrolyte level, specific gravity and outer appearance. If the vehicle is operated in
extremely hot and cold areas, ins pect the battery electrolyte level, specific gravity and appearance every
10,000 km (6,250 miles) or 6 months. The sealed battery only requires an outer appearance inspection.
*9 If the brakes are used extensively (for example, continuous ha rd driving or mountain driving) or if the vehicle
is operated in extremely humid c limates, replace the brake fluid annually.
*10 If this component has been submerged in water, the oil should be replaced.*11 Check the tyre repair fluid e xpiration date every year when performing the periodic maintenance. Replace the
tyre repair fluid bottle with new one before the expiration date.
Maintenance and Care
Scheduled Maintenance
6-16
2017-6-7 7:51:19 Form No. CX-5 8FY4-EE-17E+L_Edition2

If you must run the engine while working under the bonnet, make certain that you remove all
jewellery (especially rings, bracelets, watches, and necklaces) and all neckties, scarves, and
similar loose clothing before getting near the engine or cooling fan which may turn on
unexpectedly:
Working under the bonnet with the engine running is dangerous. It becomes even more
dangerous when you wear je wellery or loose clothing.
Either can become entangled in moving parts and result in injury.
Pull over to a safe location, then switch the ignition off and make sure the fan is not
running before attempting to work near the cooling fan:
Working near the cooling fan when it is running is dangerous. The fan could continue running
indefinitely even if the engine has stopped and the engine compartment temperature is high.
You could be hit by the fan and seriously injured.
Do not leave items in the engine compartment:
After you have finished checking or doing servic ing in the engine compartment, do not forget
and leave items such as tools or rags in the engine compartment.
Tools or other items left in the engine compartment could cause engine damage or a fire
leading to an unexpected accident.
Maintenance and Care
Owner Maintenance
6-21
2017-6-7 7:51:19 Form No. CX-5 8FY4-EE-17E+L_Edition2

Engine Compartment Overview
Windscreen washer fluid reservoir
Engine oil-filler cap
Engine oil dipstick Battery
Cooling system cap
Engine coolant reservoir
Windscreen washer fluid reservoir
Engine oil-filler capBrake/Clutch fluid reservoir
Engine oil dipstick Battery
Fuse block
Cooling system cap Engine coolant reservoir
SKYACTIV-D 2.2
SKYACTIV-G 2.0 and SKYACTIV-G 2.5
Brake/Clutch fluid reservoir
Fuse block
Maintenance and Care
Owner Maintenance
6-24
2017-6-7 7:51:19 Form No. CX-5 8FY4-EE-17E+L_Edition2

SKYACTIV-D 2.2

MINOK
MAX
X Mark
NOTE
(SKYACTIV-D 2.2)
When inspecting the engine oil level,
pull out the dipstick straight without
twisting. In addition, when inserting
the dipstick, always insert it without
twisting so that the “X” mark faces the
front of the vehicle.
5. Pull it out again and examine the level.
The level is normal if it is between the
MIN and MAX marks.
If it is near or below MIN, add enough
oil to bring the level to MAX.
CAUTION
Do not overfill the engine oil. This may
cause engine damage.
6. Make sure the O-ring on the dipstick is positioned properly before reinserting
the dipstick.
7. Reinsert the dipstick fully.
Engine Coolant
▼ Inspecting Coolant Level
WA R N I N G
Do not use a match or live flame in the
engine compartment. DO NOT ADD
COOLANT WHEN THE ENGINE IS HOT:
A hot engine is dangerous. If the engine has
been running, parts of the engine
compartment can become very hot. You
could be burned. Carefully inspect the
engine coolant in the coolant reservoir, but
do not open it.
Pull over to a safe location, then switch
the ignition off and make sure the fan is
not running before attempting to work
near the cooling fan:
Working near the cooling fan when it is
running is dangerous. The fan could
continue running indefinitely even if the
engine has stopped and the engine
compartment temperature is high. You
could be hit by the fan and seriously
injured.
Do not remove either cooling
system cap when the engine and radiator
are hot:
When the engine and radiator are hot,
scalding coolant and steam may shoot out
under pressure and cause serious injury.
Maintenance and Care
Owner Maintenance
6-29
2017-6-7 7:51:19 Form No. CX-5 8FY4-EE-17E+L_Edition2

NOTE
Changing the coolant should be done by
an expert repairer, we recommend an
Authorised Mazda Repairer.
Inspect the antifreeze protection and
coolant level in the coolant reservoir at
least once a year―at the beginning of the
winter season―and before travelling
where temperatures may drop below
freezing.

Inspect the condition and connections of
all cooling system and heater hoses.
Replace any that are swollen or
deteriorated.

The coolant should be at full in the
radiator and between the F and L marks on
the coolant reservoir when the engine is
cool.
SKYACTIV-G 2.0 and SKYACTIV-G
2.5

SKYACTIV-D 2.2

If it is at or near L, add enough coolant to
the coolant reservoir to provide freezing
and corrosion protection and to bring the
level to F.
Securely tighten the c oolant reservoir tank
cap after adding coolant.
CAUTION
 Radiator coolant will damage paint.
Rinse it
off quickly if spilled.
 If the “FL22” mark is shown on or near
the cooling system cap, use of FL-22 is
recommended when replacing engine
coolant. Using engine coolant other than
FL-22 may cause serious damage to the
engine and cooling system.

If the coolant reserv oir is empty or new
coolant is required frequently, consult an
expert repairer, we recommend an
Authorised Mazda Repairer.
Maintenance and Care
Owner Maintenance
6-30
2017-6-7 7:51:19 Form No. CX-5 8FY4-EE-17E+L_Edition2

DESCRIPTIONFUSE
RATING PROTECTED COMPONENT
3 INJECTOR
ENG.SUB 30 A
Engine control system
*
4 SCR1
EVVT 20 A
Engine control system*
5 P.WINDOW1 30 A Power windows*
6 R.HEATER 20 A ―
7 ADD FAN DE 40 A Cooling fan
*
8 WIPER.DEI 20 AWindscreen wiper de-icer*
9DEFOG 40 A Rear window defogger
10 DCDC DE 40 A For protection of various circuits
*
11EPB R 20 A Electric parking brake (EPB) (RH)
12 EPB L 20 A Electric parking brake (EPB) (LH)
13 AUDIO
DCDC REG 30 A
Audio system
*
14 FAN GE 30 A
Cooling fan*
15 ENG.MAIN 40 A Engine control system
16 ABS/DSC M 50 A ABS, Dynamic stability control system
17 FAN DE 40 A
Cooling fan
*
18 WIPER 20 A Front window wiper and washer
19 HEATER 40 A Air conditioner
20 ADD FAN GE 30 A Cooling fan
*
21 ENGINE.IG1 7.5 A Engine control system
22 C/U IG115 A For protection of various circuits
23 AUDIO2 7.5 A Audio system
24 METER2 7.5 A Instrument cluster
*
25 ENGINE3 15 A Engine control system
26 ENGINE2 15 A Engine control system
27 ENGINE1 15 AEngine control system
*
28AT 15 A
Transaxle control system*, Ignition switch
29 H/CLEAN 20 A Headlight washer
*
30A/C 7.5 A
Air conditioner*
31 AT PUMP 15 A Transaxle control system*
32HORN 15 A Horn
33 R.WIPER 15 A Rear window wiper
34 H/L HI 20 A Headlight high beam
Maintenance and Care
Owner Maintenance
*Some models.6-57
2017-6-7 7:51:19 Form No. CX-5 8FY4-EE-17E+L_Edition2