2017 MAZDA MODEL CX-5 ignition

DESCRIPTIONFUSE
RATING PROTECTED COMPONENT
3 INJECTOR
ENG.SUB 30 A
Engine control system
*
4 SCR1
EVVT 20 A
Engine control system*
5 P.WINDOW1 30 A Power windows*
6 R.HEATER 20 A ―
7 ADD FAN DE 40 A Cooling fan
*
8 WIPER.DEI 20 AWindscreen wiper de-icer*
9DEFOG 40 A Rear window defogger
10 DCDC DE 40 A For protection of various circuits
*
11EPB R 20 A Electric parking brake (EPB) (RH)
12 EPB L 20 A Electric parking brake (EPB) (LH)
13 AUDIO
DCDC REG 30 A
Audio system
*
14 FAN GE 30 A
Cooling fan*
15 ENG.MAIN 40 A Engine control system
16 ABS/DSC M 50 A ABS, Dynamic stability control system
17 FAN DE 40 A
Cooling fan
*
18 WIPER 20 A Front window wiper and washer
19 HEATER 40 A Air conditioner
20 ADD FAN GE 30 A Cooling fan
*
21 ENGINE.IG1 7.5 A Engine control system
22 C/U IG115 A For protection of various circuits
23 AUDIO2 7.5 A Audio system
24 METER2 7.5 A Instrument cluster
*
25 ENGINE3 15 A Engine control system
26 ENGINE2 15 A Engine control system
27 ENGINE1 15 AEngine control system
*
28AT 15 A
Transaxle control system*, Ignition switch
29 H/CLEAN 20 A Headlight washer
*
30A/C 7.5 A
Air conditioner*
31 AT PUMP 15 A Transaxle control system*
32HORN 15 A Horn
33 R.WIPER 15 A Rear window wiper
34 H/L HI 20 A Headlight high beam
Maintenance and Care
Owner Maintenance
*Some models.6-57
2017-6-7 7:51:19 Form No. CX-5 8FY4-EE-17E+L_Edition2

Wa t e r M a r k s
Occurrence
Rain, fog, dew, and even tap water can
contain harmful minerals such as salt and
lime. If moisture containing these minerals
settles on the vehicle and evaporates, the
minerals will concentrate and harden to
form white rings. The rings can damage
your vehicle's finish.
Prevention
It is necessary to wash and wax your
vehicle to preserve its finish according to
the instructions in this section. These steps
should be taken immediately after you find
water marks on your vehicle's finish.
Paint Chipping
Occurrence
Paint chipping occurs when gravel thrown
in the air by another v ehicle's tyres hits
your vehicle.
How to avoid paint chipping
Keeping a safe distance between you and
the vehicle ahead reduces the chances of
having your paint chipped by flying
gravel.
NOTE
•The paint chipping zone varies with the
speed of the vehicle. For example, when
travelling at 90 km/h (56 mph), the paint
chipping zone is 50 m (164 ft).
•In low temperatures a vehicle's finish
hardens. This increases the chance of
paint chipping.
•Chipped paint can lead to rust forming
on your Mazda. Before this happens,
repair the damage by using Mazda
touch-up paint according to the
instructions in this section. Failure to
repair the affected area could lead to
serious rusting and expensive repairs.

Follow all label and container directions
when using a chemical cleaner or polish.
Read all warnings and cautions.
▼ Maintaining the Finish
Wa s h i n g
CAUTION

When the wiper lever is in the
position and the ignition is switched ON,
the wipers may move automatically in
the following cases:
 If the windscreen above the rain sensor
is touched or wiped with a cloth.
 If the windscreen is struck with a hand
or other object from either outside or
inside the vehicle.
Keep hands and scrapers clear of the
windscreen when the wiper lever is in the
position and the ignition is
switched ON as fingers could be pinched
or the wipers and wiper blades damaged
when the wipers activate automatically.
If you are going to clean the windscreen,
be sure the wipers are turned off
completely (when it is most likely that the
engine is left running) this is particularly
important when clearing ice and snow.
Maintenance and Care
Appearance Care
6-62
2017-6-7 7:51:19 Form No. CX-5 8FY4-EE-17E+L_Edition2

CAUTION
Do not disassemble the Mazda ERA-GLONASS. Otherwise, it could become damaged and
may not function in an emergency.
 The Mazda ERA-GLONASS has a special built-in battery so that it can operate even if the
power supply from the vehicle is cut such as in an accident.
Heed the following cautions. If the Mazda ER A-GLONASS is not used correctly it may not
operate.
 The built-in battery is not a rechargeable ty pe battery. Do not attempt to recharge the
battery.
 If the built-in battery power is low due to natural discharge and the system determines
that there is a problem, the Mazda ER A-GLONASS cannot be used. If the system
determines that there is a problem, the indicator light (red) in the Mazda ERA-GLONASS
switch turns on to notify the driver. Have the vehicle inspected at an Authorised Mazda
Repairer. Refer to Indicator light/Beep sound on page 7-10.
NOTE
•The Mazda ERA-GLONASS can be used when the ignition is switched ON.
•There are two ways the Mazda ERA-GLONASS makes calls; automatically or manually.
•The Mazda ERA-GLONASS may not operate in the following cases: If the Mazda
ERA-GLONASS does not operate, make a call from another telephone such as the nearest
available public telephone.
•The vehicle is outside of a mobile phone network area
•The vehicle is in a weak radio wave transmission environment (such as inside tunnels,
underground parking areas, shadow of buildings, and mountain areas)
•The vehicle does not receive an impact of a certain level or more even if an accident has
occurred.
•An extremely serious collision occurs resulting in damage to the Mazda
ERA-GLONASS.
•The position information cannot be obtained when signals cannot be received from the
GPS and GLONASS satellites, however, voice calls are possible.
•When a voice call is made by the Mazda ERA-GLONASS, the audio system is muted so
that it does not interfere with the call.
•It may take some time for the call centre to respond after the Mazda ERA-GLONASS first
starts operating.
•If you are unable to respond to an operator's questions after the voice call begins, the
operator may proceed with emergency procedures at their own discretion.
•Even if it is difficult for you to hear the operator's voice, your voice may be heard by the
call centre. Continue explaining your circumstances.
If Trouble Arises
Mazda ERA-GLONASS (Russia)
7-5
2017-6-7 7:51:19 Form No. CX-5 8FY4-EE-17E+L_Edition2

2. The indicator light (green) on the Mazda ERA-GLONASS switch flashes slowly (0.5
second intervals) and the call is made to the call centre.
Green
3. When the connection is established with the call centre, the indicator light (green)
flashes somewhat quickly (0.3 second intervals) and the beep so unds simultaneously,
and the transmission of the vehicle information begins.
4. When the transmission of the vehicle information is completed or about 20 seconds have
elapsed since the transmission began, the beep sounds and the voice call with the call
centre starts.
5. If the connection fails, the i ndicator light (red) turns on and the indicator light (green)
flashes quickly (0.15 second intervals) and the beep sounds simultaneously.
In this case, make a manual connection using the Mazda ERA-GLON ASS switch
because an automatic connection is not possible.
Green
(Flashes)Red
(Turns
on)
Manual emergency calls
With the ignition switched ON, l ong-press the Mazda ERA-GLONASS switch and after
releasing your finger from the switch, the vehicle information is automatically transmitted to
the call centre.
When the transmission of the vehicle information is completed o r about 20 seconds have
elapsed since the transmission began, the voice call with the c all centre starts.
NOTE
•Only make calls manually for conditions requiring urgent treatment such as illness or
serious injury.
If Trouble Arises
Mazda ERA-GLONASS (Russia)
7-7
2017-6-7 7:51:19 Form No. CX-5 8FY4-EE-17E+L_Edition2

•When making emergency calls manually, stop the vehicle in a safe location before making
the call.
•A manual emergency call can be cancelled even after the Mazda ERA-GLONASS switch
has been pressed by pressing the switch again, as long as the call with the call centre has
not begun. If the call cannot be cancelled and the call with the call centre has begun, tell
the operator that the call is mistaken.
•The call centre will end an emergency call. The user cannot end the emergency call.
1. Make sure that the ignition is switched ON.
2. Long-press the Mazda ERA-GLONASS switch on the overhead conso le and then release
your finger from the switch.
Mazda ERA-GLONASS switch
3. The indicator light (green) on the Mazda ERA-GLONASS switch f lashes slowly (0.5
second intervals) and the call is made to the call centre.
Green
4. When the connection is established with the call centre, the indicator light (green)
flashes somewhat quickly (0.3 second intervals) and the beep so unds simultaneously,
and the transmission of the vehicle information begins.
5. When the transmission of the vehicle information is completed or about 20 seconds have
elapsed since the transmission began, the beep sounds and the v oice call with the call
centre starts.
6. If the connection fails, the i ndicator light (red) turns on and the indicator light (green)
flashes quickly (0.15 second intervals), and the beep sounds simultaneously.
If Trouble Arises
Mazda ERA-GLONASS (Russia)
7-8
2017-6-7 7:51:19 Form No. CX-5 8FY4-EE-17E+L_Edition2

Indicator Light/Beep Sound
The indicator light turns on/flashes and beep sounds are activa ted to notify the driver of the
system operation status or if the re is a problem with the system.
StatusIndicator light
Beep sound
status On/flashing conditions
Green Red Flash interval
Diagnosis Turns on Turns on ― ―When the ignition is switched
ON, it turns on and then turns
off after a few seconds.
NOTE
A manual emergency call is not
possible during diagnosis.
Normal Turns off Turns off ― ―The system is operating normal-
ly.
Malfunction Turns off Turns on ― 3 beeps
(Slow intermit-
tent sound)
•A system malfunction is de-
tected.
•The remaining power of the
built-in battery is low.
CAUTION
If the indicator light (red) re‐
mains on constantly, the system
will not operate normally. Have
the vehicle inspected at an Au‐
thorised Mazda Repairer as soon
as possible.
Call being made with call centre Flashes Turns off Slow
(0.5 second in- tervals) The beep does
not sound, but the ringbacktone can be heard. An emergency call is being
made by the Mazda ERA-GLO-
NASS.
Vehicle infor-
mation is being transmitted Flashes Turns off Somewhat
quick
(0.3 second in-
tervals) Continuous in-
termittent sound Vehicle information is being
transmitted to the call centre.
Start of voice call Turns on Turns off ―
1 beep
During a voice call with the call
centre.
During voice
call Turns on Turns off ―
―
Connection fail- ure Flashes Turns on Quick
(0.15 second in- tervals) 3 beeps
(Fast intermit- tent sound) When an emergency call fails to
connect.
If Trouble Arises
Mazda ERA-GLONASS (Russia)
7-10
2017-6-7 7:51:19 Form No. CX-5 8FY4-EE-17E+L_Edition2

Te s t M o d e
The test mode function makes sure that the Mazda ERA-GLONASS can operate normally.
Have your vehicle tested at an Authorised Mazda Repairer when p erforming the test mode.
Method to start test mode
Switch the ignition ON while the parking brake is applied, and wait two minutes with the
vehicle stopped.
If Trouble Arises
Mazda ERA-GLONASS (Russia)
7-11
2017-6-7 7:51:19 Form No. CX-5 8FY4-EE-17E+L_Edition2

NOTE
Do not throw away the empty tyre
sealant bottle after use. Return the
empty tyre sealant bottle to an
Authorised Mazda Repairer when
replacing the tyre. The empty tyre
sealant bottle will need to be used to
extract and dispose of the used sealant
from the tyre.
12. Adhere the speed restriction sticker to
the speedometer.

WA R N I N G
Attach the speed restriction sticker in a
place where it can be viewed easily by
the driver:
Applying the speed restriction sticker
to the steering wheel is dangerous as
it could interfere with the air bag
deployment and result in serious
injury.
 Do not apply the sticker to any
position other than the position
indicated in the illustration of the
speedometer.
13. Install the compressor hose to the tyre
valve.

Valve Compressor hose
14. Insert the compressor plug into theinterior accessory socket and switch
the ignition to A CC (page 5-144).

Compressor plug
Compressor
Centre console
CAUTION
Before pulling out the compressor
plug from the electrical socket, make
sure the compressor power switch is
off.
 The compressor turns on and
off with
the push-button switch.
15. Turn the compressor switch on and inflate the tyre carefully to the correct
inflation pressure.
If Trouble Arises
Flat Tyre
7-23
2017-6-7 7:51:19 Form No. CX-5 8FY4-EE-17E+L_Edition2