2017 MAZDA MODEL 6 instrument cluster

7–28
If Trouble Arises
Warning/Indicator Lights and Warning Sounds
*Some models.
SignalWarning
(Amber)
Lane-keep Assist System (LAS) & Lane Departure
Warning System
(LDWS) Warning Indication
*
The message is displayed when the system has a malfunction. Have your ve\
hicle inspected
at an Authorized Mazda Dealer.
The system does not operate when the warning message is displayed.
CAUTION
 Always use tires for all wheels that are of the specified size, and the same
manufacture, brand, and tread pattern. In addition, do not use tires with significantly
different wear patterns on the same vehicle. If such improper tires are used, the system
may not operate normally.
 When an emergency spare tire is used, the system may not operate normally.
NOTE
If the windshield area in front of the Forward Sensing Camera (FSC) is fogged or
obstructed, the light turns on temporarily. If the light remains turned on, there may be a
problem with the system.
Blind Spot
Monitoring (BSM) OFF Indicator Light
*
A problem in the system may be indicated under the following conditions.
Have your vehicle inspected at an Authorized Mazda Dealer.
The light does not turn on when the ignition is switched ON.It turns on while driving the vehicle.
NOTE
If the vehicle is driven on a road with less traffic and few vehicles that the radar sensors
can detect, the system may pause (The Blind Spot Monitoring (BSM) OFF\
indicator light in
the instrument cluster illuminates). However, it does not indicate a malfunction.
LED Headlight Warning Light This light illuminates if there is a malfunction in the LED headlight. Have your vehicle
inspected by an Authorized Mazda Dealer.
Mazda6_8FH2-EA-16F_Edition2.indb 282016/07/07 13:46:34

7–37
If Trouble Arises
Warning/Indicator Lights and Warning Sounds
NOTE
 To allow the front passenger occupant
classification sensor to function
properly, do not place and sit on an
additional seat cushion on the front
passenger's seat. The sensor may not
function properly because the additional
seat cushion could cause sensor
interference.
 If a small child is seated on the front
passenger's seat, the warning beep may
not operate.
Mexico
If the vehicle speed exceeds about 20
km/h (12 mph) with the driver or front
passenger's seat belt unfastened, a warning
beep sounds continuously. If the seat belt
remains unfastened, the beep sound stops
once and then continues for about 90
seconds. The beep stops after the driver or
front passenger's seat belt is fastened.
Until a seat belt is fastened or a given
period of time has elapsed, the beep sound
will not stop even if the vehicle speed falls
below 20 km/h (12 mph).
NOTE
 Placing heavy items on the front
passenger's seat may cause the front
passenger's seat belt warning function
to operate depending on the weight of
the item.
 To allow the front passenger seat weight
sensor to function properly, do not place
and sit on an additional seat cushion on
the front passenger's seat. The sensor
may not function properly because the
additional seat cushion could cause
sensor interference.
 If a small child is seated on the front
passenger's seat, the warning beep may
not operate.
Ignition Not Switched Off (STOP)
Warning Beep
If the driver's door is opened with the
ignition switched to ACC, a beep will
be heard continuously in the cabin to
notify the driver that the ignition has not
been switched OFF (STOP). Under this
condition, the keyless entry system will
not operate, the vehicle cannot be locked,
and the battery voltage will be depleted.
Key Removed from Vehicle
Warning Beep
Vehicles with advanced keyless function
If the key is taken out of the vehicle while
the ignition is not switched OFF and
all the doors are closed, the beep which
sounds outside of the vehicle will be heard
6 times, the beep which sounds inside
the vehicle will be heard 6 times, and the
KEY warning light (red) in the instrument
cluster flashes continuously to notify
the driver that the ignition has not been
switched OFF.
Vehicles without advanced keyless
function
If the key is taken out of the vehicle while
the ignition is not switched OFF and all
the doors are closed, a beep will be heard
in the cabin 6 times and the KEY warning
light (red) in the instrument cluster turns
on continuously to notify the driver that
the ignition has not been switched OFF.
NOTE
Because the key utilizes low-intensity
radio waves, the Key Removed From
Vehicle Warning may activate if the key is
carried together with a metal object or it
is placed in a poor signal reception area.
Mazda6_8FH2-EA-16F_Edition2.indb 372016/07/07 13:46:37

7–39
If Trouble Arises
Warning/Indicator Lights and Warning Sounds
*Some models.
Mazda Radar Cruise Control
(MRCC) System Warnings*
The Mazda Radar Cruise Control (MRCC)
system warnings notify the driver of
system malfunctions and cautions on use
when required.
Check based on the beep sound.
Cautions What to check
The beep sounds 1 time
while the Mazda Radar
Cruise Control (MRCC)
is operating The vehicle speed is
slower than 25 km/h (16
mph) and the Mazda
Radar Cruise Control
(MRCC) system has
been canceled.
The beep sounds
continuously while
driving The distance between
your vehicle and the
vehicle ahead is too
close. Verify the safety
of the surrounding area
and reduce vehicle
speed.
While the Mazda Radar
Cruise Control (MRCC)
is operating, the beep
sounds and the multi-
information display
indicates a problem
with the Mazda Radar
Cruise Control (MRCC)
system. A malfunction in
the system may be
indicated. Have your
vehicle inspected at
an Authorized Mazda
Dealer.

Lane Departure Warning Sound*
While the system is operating, if the
system determines that the vehicle may
depart from the lane, it sounds a warning
sound.
NOTE
 The volume of the Lane-keep Assist
System (LAS) & Lane Departure
Warning System (LDWS) warning sound
can be changed.
Refer to Personalization Features on
page 9-10.
 The type of the Lane-keep Assist System
(LAS) & Lane Departure Warning
System (LDWS) warning sound can be
changed.
Refer to Personalization Features on
page 9-10.
Collision warning*
If there is a possibility of a collision
with a vehicle ahead, a warning sound is
activated at the same time as the warning
indications are displayed in the instrument
cluster or active driving display.
Power Steering Warning Buzzer
If the power steering system has
a malfunction, the power steering
malfunction light turns on or flashes and
the buzzer operates at the same time.
Refer to Warning Indication/Warning
Lights on page 4-33.
Electric Parking Brake Warning
Beep
The warning buzzer is activated under the
following conditions:
 The vehicle is driven with the electric
parking brake applied.
 The electric parking brake switch is
pulled while the vehicle is driven.
Mazda6_8FH2-EA-16F_Edition2.indb 392016/07/07 13:46:37

10–5
Index
I
i-ACTIVSENSE ..................................4-88
Active safety technology ............... 4-88
Adaptive Front Lighting System

(AFS) ............................................. 4-90
Blind Spot Monitoring (BSM) ...... 4-94
Camera and sensors ....................... 4-89
Distance Recognition Support System
(DRSS) ........................................ 4-107
Forward Sensing Camera (FSC) ...4-146
High Beam Control System

(HBC) ............................................ 4-91
Lane-keep Assist System (LAS) &
Lane Departure Warning System
(LDWS) ....................................... 4-125
Mazda Radar Cruise Control

(MRCC) ....................................... 4-115
Pre-crash safety technology .......... 4-88
Radar sensor (front) .....................4-150
Radar sensors (rear) .....................4-153
Rear Cross Traffic Alert (RCTA) ...4-111
Smart Brake Support (SBS) ........ 4-143
Smart City Brake Support

(SCBS) ........................................ 4-138
Traffic Sign Recognition System
(TSR) ........................................... 4-100
i-ELOOP ............................................. 4-80
Control status display .................... 4-82
Display .......................................... 4-80
i-ELOOP Warning Beep ................ 7-38
i-ELOOP indicator light ................ 4-82
i-ELOOP warning beep ....................... 7-38
If a Warning Light Turns On or

Flashes................................................. 7-22
If the Active Driving Display does not
operate ................................................. 7-41
Ignition Switch .............................................. 4-4
Ignition Not Switched Off (STOP)
Warning Beep ...................................... 7-37
Illuminated Entry System ...................5-87
Immobilizer System ............................ 3-40Indication/Indicator Lights ..................
4-36
Indicator Lights Low engine coolant temperature ... 4-38
Wrench .......................................... 4-38
Inside Trunk Release Lever ................3-23
Inspecting Brake/Clutch Fluid Level ...6-31
Inspecting Coolant Level ....................6-29
Inspecting Engine Oil Level ............... 6-29
Inspecting Washer Fluid Level ............6-31
Instrument Cluster ............................... 4-12
Interior Care ........................................ 6-70
Active driving display

maintenance ................................... 6-72
Cleaning the floor mats ................. 6-73
Cleaning the window interiors ...... 6-72
Instrument panel top (Soft pad)
maintenance ................................... 6-72
Leather upholstery maintenance ... 6-71
Panel maintenance ......................... 6-72
Plastic part maintenance ................ 6-71
Seat belt maintenance .................... 6-70
Upholstery maintenance ................ 6-71
Vinyl upholstery maintenance .......6-71
Interior Lights ..................................... 5-85
Courtesy lights .............................. 5-85
Map lights ...................................... 5-85
Overhead lights ............................. 5-85
J
Jack ....................................................... 7-4
Jump-Starting ...................................... 7-13
Mazda6_8FH2-EA-16F_Edition2.indb 52016/07/07 13:46:50