7–6
If Trouble Arises
Flat Tyre
*Some models.
Jack *
To remove the jack
(With spare tyre)
Saloon
1. Lift the boot mat.
2. Remove the boot board.
3. Turn the wing bolt and jack screw
anticlockwise.
Wing boltJack screw
Hatchback
1. Remove the cover.
Tabs
2. Turn the wing bolt and jack screw
anticlockwise.
7–7
If Trouble Arises
Flat Tyre
(Without spare tyre)
1. Lift the luggage compartment mat.
2. Remove the jack.
To secure the jack
(With spare tyre)
1. Insert the wing bolt into the jack with
the jack screw pointing to the right
(Saloon) or down (Hatchback) and turn
the wing bolt clockwise to temporarily
tighten it. 2. Turn the jack screw in the direction
shown in the ¿ gure.
Saloon
Wing boltJack screw
Hatchback
3. Turn the wing bolt completely to secure
the jack.
NOTE
If the jack is not completely secured, it
could rattle while driving. Make sure the
jack screw is suf ¿ ciently tightened.
7–9
If Trouble Arises
Flat Tyre
*Some models.
To remove the spare tyre
1. Lift the boot/luggage compartment mat.
2. Turn the spare tyre hold-down bolt
anticlockwise.
Spare tyre hold-down bolt
To secure the spare tyre
Store the spare tyre in the reverse order
of removal. After storing, verify that the
spare tyre is stored securely.
Emergency Flat Tyre
Repair Kit
*
The emergency À at tyre repair kit included
with your Mazda is for a temporary repair
of a slightly damaged À at tyre resulting
from running over nails or similar sharp
objects on the road surface.
Perform the emergency À at tyre repair
without removing the nail or similar sharp
object which punctured the tyre.
NOTE
Your vehicle is not equipped with a
spare tyre. In the event of a À at tyre,
use the emergency À at tyre repair kit
to repair the tyre temporarily. When
doing the repair, refer to the instructions
included in the emergency À at tyre
repair kit. If an emergency repair was
performed on a À at tyre using the
emergency À at tyre repair kit, have
an expert repairer, we recommend an
Authorised Mazda Repairer, repair or
replace the tyre as soon as possible.