2017 LINCOLN CONTINENTAL Owners Manual

Page 177 of 584

LINCOLN CONTINENTAL 2017  Owners Manual Automatic Engine Shutdown Override
Note:
 You cannot permanently switch off
the automatic shutdown.  When you switch
it off temporarily, it turns on at the next
ignition cycle.
You can stop the shutdo

Page 178 of 584

LINCOLN CONTINENTAL 2017  Owners Manual ENGINE BLOCK HEATER (If Equipped)
WARNINGS
Failure to follow engine block heater
instructions could result in property
damage or serious personal injury. Do not use your heater with
ungrounded electri

Page 179 of 584

LINCOLN CONTINENTAL 2017  Owners Manual SAFETY PRECAUTIONS
WARNINGS
Do not overfill the fuel tank. The
pressure in an overfilled tank may
cause leakage and lead to fuel spray and
fire. The fuel system may be under
pressure. If you hear a hi

Page 180 of 584

LINCOLN CONTINENTAL 2017  Owners Manual •
Fuels can also be harmful if absorbed
through the skin. If fuel is splashed on
the skin, clothing or both, promptly
remove contaminated clothing and wash
skin thoroughly with soap and water.
Repea

Page 181 of 584

LINCOLN CONTINENTAL 2017  Owners Manual •
Fuels containing the octane booster
additive, methylcyclopentadienyl
manganese tricarbonyl (MMT).
• Leaded fuel (using leaded fuel is
prohibited by law).
The use of fuels with metallic compounds

Page 182 of 584

LINCOLN CONTINENTAL 2017  Owners Manual WARNINGS
Do not try to pry open or push open
the capless fuel system with foreign
objects. This could damage the fuel system
and its seal and cause injury to you or others. Do not dispose of fuel in t

Page 183 of 584

LINCOLN CONTINENTAL 2017  Owners Manual WARNINGS
Stop refueling when the fuel pump
nozzle automatically shuts off for the
first time. Failure to follow this will fill the
expansion space in the fuel tank and could
lead to fuel overflowing.

Page 184 of 584

LINCOLN CONTINENTAL 2017  Owners Manual Note:
When you insert the correct size fuel
pump nozzle a spring loaded inhibitor will
open.
2. Insert the fuel pump nozzle up to the first
notch on the nozzle A.  Keep it resting
on the cover of the