2017 LEXUS RC200T oil

667
9Vehicle specifications
RC200t_RC F_EE(OM24728E)
9-1. Specifications
Maintenance data
(fuel, oil level, etc.) ..................668
Fuel information..........................683
9-2. Customization
Customizable features ............685
9-3. Items to initialize
Items to initialize ......................... 697

668
RC200t_RC F_EE(OM24728E)
9-1. Specifications
RC200t
*1: Unladen vehicle
*2: Vehicles with 265/35R19 tires
RC F
*: Unladen vehicle
Maintenance data (fuel, oil level, etc.)
Dimensions and weights
Overall length4695 mm (184.8 in.)
Overall width1840 mm (72.4 in.)
Overall height*11395 mm (54.9 in.)
Wheelbase2730 mm (107.5 in.)
Tread*1
Front1580 mm (62.2 in.)
Rear1600 mm (63.0 in.)
1570 mm (61.8 in.)*2
Gross vehicle mass2170 kg (4784 lb.)
Maximum permissi-
ble axle capacity
Front1120 kg (2469 lb.)
Rear1205 kg (2657 lb.)
Overall length 4705 mm (185.2 in.)
Overall width 1845 mm (72.6 in.)
Overall height*1390 mm (54.7 in.)
Wheelbase 2730 mm (107.5 in.)
Tread*Front 1555 mm (61.2 in.)
Rear 1560 mm (61.4 in.)
Gross vehicle mass 2250 kg (4960 lb.)
Maximum permissi- ble axle capacity
Front 1260 kg (2778 lb.)
Rear 1260 kg (2778 lb.)

671
9
9-1. Specifications
Vehicle specifications
RC200t_RC F_EE(OM24728E)
*: If unleaded gasoline with an octane rating of 98 RON is not available, unleaded gaso-
line with an octane rating of 95 RON may be used with no detriment to engine dura-
bility or driveability.
■Oil capacity (Drain an d refill [Reference*])
*: The engine oil capacity is a reference quantity to be used when changing the engine
oil. Warm up and turn off the engine, wait more than 5 minutes, and check the oil level
on the dipstick.
Fuel
Fuel type
EU area: Unleaded gasoline conforming to Europeanstandard EN228 only
Except EU area: Unleaded gasoline only
Research Octane NumberRC200t95 or higher
RC F98 or higher*
Fuel tank capacity(Reference)66 L (17.4 gal., 14.5 Imp. gal.)
Lubrication system
RC200tRC F
With filter4.6 L (4.9 qt., 4.0 Imp. qt.)8.8 L (9.3 qt., 7.7 Imp. qt.)
Without filter4.3 L (4.5 qt., 3.8 Imp. qt.)7.9 L (8.3 qt., 7.0 Imp. qt.)

6729-1. Specifications
RC200t_RC F_EE(OM24728E)
■Engine oil selection (RC200t)
“Toyota Genuine Motor Oil SAE 0W -20 for Downsized Turbo Gasoline
Engines” is used in your Lexus vehicl e. Use Lexus approved “Toyota Genuine
Motor Oil SAE 0W-20 for Downsized Turbo Gasoline Engines” or equiva-
lent to satisfy the following grade and viscosity.
Oil grade:
“Toyota Genuine Motor Oil SAE 0W -20 for Downsized Turbo Gasoline
Engines” or API grade SL “Energy-Co nserving”, SM “Energy-Conserving” or
SN “Resource-Conserving”; or ILSAC multigrade engine oil
Viscosity grade:
SAE 0W-20 and 5W-30
Recommended viscosity (SAE):
“Toyota Genuine Motor Oil SAE
0W-20 for Downsized Turbo Gaso-
line Engines” is filled into your Lexus
vehicle at manufacturing, and SAE
0W-20 is the best choice for good
fuel economy and good starting in
cold weather.
If SAE 0W-20 oil is not available,
SAE 5W-30 oil may be used. How-
ever, it should be replaced with SAE
0W-20 at the next oil change.
Temperature range anticipated
before next oil change.
Preferred

673
9
9-1. Specifications
Vehicle specifications
RC200t_RC F_EE(OM24728E)
Oil viscosity (0W-20 is explained here as an example):
• The 0W in 0W-20 indicates the characteristic of the oil which allows cold
startability. Oils with a lower value before the W allow for easier starting of
the engine in cold weather.
• The 20 in 0W-20 indicates the viscosity characteristic of the oil when the
oil is at high temperature. An oil with a higher viscosity (one with a higher
value) may be better suited if the vehicle is operated at high speeds, or
under extreme load conditions.
How to read oil container labels:
Either or both API registered marks are added to some oil containers to help
you select the oil you should use.
API Service Symbol
Top portion: “API SERVICE SN” means the oil quality designation by
American Petroleum Institute (API).
Center portion: “SAE 0W-20” means the SAE viscosity grade.
Lower portion: “Resource- Conserving” means that the oil hasfuel-saving and environmental pro-
tection capabilities.
ILSAC Certification Mark
The International Lubricant Specificatio n Advisory Committee (ILSAC) Certifica- tion Mark is displayed on the front of the container.
1
2

6749-1. Specifications
RC200t_RC F_EE(OM24728E)
■Engine oil selection (RC F)
“Toyota Genuine Motor Oil” is used in your Lexus vehicle. Lexus recom-
mends the use of approved “Toyota Genuine Motor Oil”. Another motor oil of
matching quality can also be used.
Oil grade:
5W-30 and 10W-30:
API grade SL “Energy-Conserving ”, SM “Energy-Conserving” or SN
“Resource-Conserving”; or IL SAC multigrade engine oil
15W-40:
API grade SL, SM or SN multigrade engine oil
Recommended viscosity (SAE):
SAE 5W-30 is filled into your Lexus
vehicle at manufacturing, and the
best choice for good fuel economy
and good starting in cold weather.
If you use SAE 10W-30 or a higher
viscosity engine oil in extremely low
temperatures, the engine may
become difficult to start, so SAE
5W-30 engine oil is recommended.
Temperature range anticipated
before next oil change.
Preferred

675
9
9-1. Specifications
Vehicle specifications
RC200t_RC F_EE(OM24728E)
Oil viscosity (5W-30 is explained here as an example):
• The 5W in 5W-30 indicates the characteristic of the oil which allows cold
startability. Oils with a lower value before the W allow for easier starting of
the engine in cold weather.
• The 30 in 5W-30 indicates the viscosity characteristic of the oil when the
oil is at high temperature. An oil with a higher viscosity (one with a higher
value) may be better suited if the vehicle is operated at high speeds, or
under extreme load conditions.
How to read oil container labels:
Either or both API registered marks are added to some oil containers to help
you select the oil you should use.
API Service Symbol
Top portion: “API SERVICE SN” means the oil quality designation by
American Petroleum Institute (API).
Center portion: “SAE 5W-30” means the SAE viscosity grade.
Lower portion: “Resource- Conserving” means that the oil hasfuel-saving and environmental pro-
tection capabilities.
ILSAC Certification Mark
The International Lubricant Specificatio n Advisory Committee (ILSAC) Certifica- tion Mark is displayed on the front of the container.
1
2

6789-1. Specifications
RC200t_RC F_EE(OM24728E)
RC200t (vehicles without LSD [Limited Slip Differential])
RC200t/RC F (vehicles with LSD [Limited Slip Differential])
RC F (vehicles with TVD [Torque Vectoring Differential])
*1: Your Lexus vehicle is filled with “Toyota Genu ine Differential Gear Oil” at the factory.
Use Lexus approved “Toyota Genuine Differe ntial Gear Oil” or an equivalent of
matching quality to satisfy the above specification. Please contact any authorized
Lexus dealer or repairer, or another duly qualified and equipped professional for fur-
ther details.
*2: Torque transfer modules are located on the ri ght and left sides of the differential unit.
*3: Using torque transfer module fluid other than “Toyota Genuine ATF WS” may cause
deterioration of performance, vibration, or ultimately damage the TVD system of your
vehicle.
Differential
Oil capacity1.35 L (1.42 qt., 1.19 Imp. qt.)
Oil type and viscosityToyota Genuine Diffe rential gear oil LT 75W-85 GL-5 or equivalent*1
Oil capacity 1.35 L (1.42 qt., 1.19 Imp. qt.)
Oil type and viscosityToyota Genuine Differential gear oil LX
75W-85 GL-5 or equivalent*1
DifferentialTorque transfer module*2
Oil capacity1.35 L (1.42 qt., 1.19 Imp. qt.)
Left-hand side: 0.70 L (0.74 qt., 0.62 Imp. qt.)
Right-hand side: 0.70 L (0.74 qt., 0.62 Imp. qt.)
Oil type andviscosity
Toyota Genuine Differential gear oil LT
75W-85 GL-5 or equivalent*1Toyota Genuine ATF WS*3