2017 Lexus IS200t navigation

121
3. ROUTE GUIDANCE
IS_NAVI_EE
NAVIGATION SYSTEM
3
1Display the “Route” screen. (→P.120)
2Select “Delete” .
3Select “Yes” when the confirmation
screen appears.
z When more than 1 destination is set, a list
will be displayed on the screen.
“Delete all” : Select to delete all destinations
on the list.
z If more than 1 destination has been set, the
system will recalculate the route(s) to the
set destination(s) as necessary.
1Display the “Route” screen. ( →P.120)
2Select “Search condition” .
3Select the desired type and select “OK”.
1Display the “Route” screen. ( →P.120)
2Select “Detour” .
3Select the desired detour distance.
DELETING DESTINATIONS
SETTING SEARCH
CONDITION
Road conditions of the route to the des-
tination can be set.
DETOUR SETTING
During the route guidance, the route
can be changed to detour around a sec-
tion of the route where a delay is caused
by road repairs, an accident, etc.
No.Function
Select to detour within 1 mile of the
current position.
Select to detour within 3 miles of the
current position.
Select to detour within 5 miles of the
current position.
Select to detour on the entire route.
Select to make the system search for
the route based on the traffic con-
gestion information received from
traffic information. ( →P.93)

123
3. ROUTE GUIDANCE
IS_NAVI_EE
NAVIGATION SYSTEM
31Display the “Route” screen. (→P.120)
2Select “Route overview” .
3Check that the entire route map is dis-
played.
■TURN LIST
1Select “Turn list” .
2 Check that the turn list is displayed.
ROUTE OVERVIEW
The entire route from the current posi-
tion to the destination can be viewed
during route guidance.
No.FunctionPage
Select to display a list of the
turns required to reach the
destination.123
Select to change the route.120
Select to start guidance.
The turn list on the guidance route can
be viewed.
No.Information
Current position
Distance to the next turn
Turn direction at the intersection
Select to display the map of the se-
lected point.
INFORMATION
●
However, not all road names in the route
may appear on the list. If a road changes
its name without requiring a turn (such as
on a street that runs through 2 or more
towns), the name change will not appear
on the list. The street names will be dis-
played in order from the starting point,
along with the distance to the next turn.

125
4. MY MEMORY
IS_NAVI_EE
NAVIGATION SYSTEM
3
1Select “Register” .
2Select the desired item to search for the
location. (→P.98)
3Select “OK” when the editing home
screen appears. ( →P.125)
1Select “Edit”.
2Select the desired item to be edited.
3Select “OK”.
1Select “Delete” .
2Select “Yes” when the confirmation
screen appears.
REGISTERING HOMEEDITING HOME
No.FunctionPage
Select to change the icon to
be displayed on the map
screen.129
Select to edit the home
name.130
Select to display the home
name on the map screen.
When set to on, the indica-
tor will illuminate.

Select to edit location infor-
mation.130
Select to edit the telephone
number.130
DELETING HOME

127
4. MY MEMORY
IS_NAVI_EE
NAVIGATION SYSTEM
3
1Select “Edit”.
2Select the desired quick access.
3Select the desired item to be edited.
4Select “OK”.
1Select “Delete” .
2Select the quick access to be deleted
and select “Delete”.
3Select “Yes” when the confirmation
screen appears.
EDITING QUICK ACCESS
No.FunctionPage
Select to change the icon to
be displayed on the map
screen.129
Select to edit the quick ac-
cess name.130
Select to display the quick
access name on the map
screen.
When set to on, the indica-
tor will illuminate.

Select to edit location infor-
mation.130
Select to edit the telephone
number.130
DELETING QUICK ACCESS

129
4. MY MEMORY
IS_NAVI_EE
NAVIGATION SYSTEM
31Select “Edit”.
2Select the desired memory point.
3Select the desired item to be edited.
4Select “OK”.
■CHANGING THE MARK
1Select “Mark” .
2Select the desired icon.
zChange pages by selecting the “Page 1”,
“Page 2” or “With sound” tab.
“With sound” : Select the memory points
with a sound.
X When “With sound” is selected
1Select the “With sound” tab.
2Select the desired sound icon.
: Select to play the sound.
zWhen “Bell (with direction)” is selected,
select an arrow to adjust the direction and
select “OK”.
EDITING MEMORY POINTS
The icon, name, location, telephone
number and/or group of a registered
memory point can be edited.
No.FunctionPage
Select to change the icon to
be displayed on the map
screen.129
Select to edit the memory
point name.130
Select to display the memo-
ry point name on the map
screen.
When set to on, the indica-
tor will illuminate.

Select to edit location infor-
mation.130
Select to edit the telephone
number.130
Select to register group.130
A sound for some memory points can be
set. When the vehicle approaches the
location of the memory point, the select-
ed sound will be heard.
INFORMATION
●
The bell sounds only when the vehicle
approaches this point in the direction that
has been set.

131
4. MY MEMORY
IS_NAVI_EE
NAVIGATION SYSTEM
31Select “Stored routes” .
2Select “Edit”.
3Select the desired stored route.
4Select the desired item to be edited.
“Name” : Select to edit the route name.
( → P.130)
Destinations: Select to edit the locations.
( → P.130)
“Reorder” : Select to reorder destinations.
( → P.131)
“Delete” : Select to delete destinations.
( → P.131)
■REORDERING DESTINATIONS
1Select “Reorder” .
2Select the desired destination and se-
lect “Move up” or “Move down” to
change the arrival order. Then select
“OK” .
■DELETING DESTINATIONS
1Select “Delete” .
2Select the destination to be deleted and
select “Delete” .
3Select “Yes” when the confirmation
screen appears.
1Select “Stored routes” .
2Select “Delete” .
3Select the stored route to be deleted
and select “Delete”.
4Select “Yes” when the confirmation
screen appears.
EDITING STORED ROUTES
Destinations of stored routes can be
changed and deleted. Also, the arrival
order of destinations can be changed.
Importing stored routes: →P.306
DELETING STORED ROUTES

133
4. MY MEMORY
IS_NAVI_EE
NAVIGATION SYSTEM
3
1Select “Edit”.
2Select the area.
3Select the item to be edited.
4Select “OK”.
■CHANGING THE NAME
1Select “Name” .
2Enter the desired name and select
“OK”.
■CHANGING THE LOCATION
1Select “Location” .
2Scroll the map to the desired point
(→ P.88) and select “OK”.
■CHANGING THE AREA SIZE
1Select “A r e a s i z e ” .
2Select either or to
change the size of the area to be avoid-
ed and select “OK”.
1Select “Delete” .
2Select the area to be deleted and select
“Delete”.
3Select “Yes” when the confirmation
screen appears.
EDITING AREA TO AVOID
The name, location and/or area size of a
registered area can be edited.
No.FunctionPage
Select to turn the area to
avoid function on/off.
When set to on, the indica-
tor will illuminate.

Select to edit the name of
the area to avoid.133
Select to display the name
of the area to avoid on the
map screen.
When set to on, the indica-
tor will illuminate.

Select to edit the area loca-
tion.133
Select to edit the area size.133
DELETING AREA TO AVOID

135
4. MY MEMORY
IS_NAVI_EE
NAVIGATION SYSTEM
3
■CHANGING THE NAME
1Select “Name” .
2Enter the desired name and select
“OK”.
1Select “Delete” .
2Select the route trace to be deleted and
select “delete” .
3Select “Yes” when the confirmation
screen appears.
1Press the button to release the lock and
lift the armrest.
2Open the cover and connect a USB
memory.
z Turn on the power of the USB memory if it
is not turned on.
3Close the console box.
4Display the “My memory” screen.
(→ P.124)
DELETING ROUTE TRACES
BACKUP TO A USB MEMORY
Memory points registered in the naviga-
tion system can be copied to a USB
memory.
A password must first be set in order to
back up data. ( →P.136)
zExporting memory point data is for your
back-up use only and distribution or
usage in other system is strictly prohib-
ited.