2017 Lexus ES300h display

83
1. BASIC OPERATION
ES350/300h_Navi_OM33C79U_(U)16.06.22 14:51
NAVIGATION SYSTEM
3
■DUAL MAP
1Select any point on the right side map.
2Select the desired item.
zWhen set to on, the indicator will illuminate.
■ COMPASS
The map on the left is the main map.
The right side map can be edited.
No.FunctionPage
Select to change the ori-
entation of the map.81
Select to display POI
icons.86
*Select to show traffic in-
formation. 91
*Select to display eDesti-
nation icons.326
Select to change the map
scale.80
*: This function is not made available on some models.
Information about the destination, cur-
rent position and a compass is displayed
on the screen.
INFORMATION
● The destination mark is displayed in the
direction of the destination. When driv-
ing, refer to the longitude and latitude
coordinates, and the compass, to make
sure that the vehicle is headed in the
direction of the destination.
● When the vehicle travels out of the cover-
age area, the guidance screen changes to
the whole compass mode screen.
ES350_300h_Navi_OM33C79U_(U).book Page 83 Wednesday, June 22, 2016 2:54 PM

84
1. BASIC OPERATION
ES350/300h_Navi_OM33C79U_(U)16.06.22 14:51
zTo scroll over the map screen, place the
cursor mark in the desired position and
then press and hold the Remote Touch
knob. The map will continue scrolling in that
direction until the knob is released.SCREEN SCROLL
OPERATION
Use the scroll feature to move the de-
sired point to the center of the screen for
looking at a point on the map that is dif-
ferent from the current position.
No.Information/Function
Cursor mark
Distance from the current position to
the cursor mark
Select to set as a destination.
When selecting “Go to ” on the
following map screen, the navigation
system performs a search for the
route. ( →P.105)
If a destination has already been set,
“Go to ” and “Add to Route” will
be displayed.
“Go to ” : Select to delete the exist-
ing destination(s) and set a new one.
“Add to Route” : Select to add a des-
tination.
Select to register as a memory point.
To change the icon, name, etc.: →P.126
Select to return to the current posi-
tion.
ES350_300h_Navi_OM33C79U_(U).book Page 84 Wednesday, June 22, 2016 2:54 PM

86
1. BASIC OPERATION
ES350/300h_Navi_OM33C79U_(U)16.06.22 14:51
3. MAP SCREEN INFORMATION
1Select on the map screen.
(→ P.78)
2Select “Map Information” .
3Select the desired items to be displayed.
zWhen set to on, the indicator will illuminate.
1Display the “Map Information” screen.
(→ P.86)
2Select “Select POI” .
zWhen the POI icons to be displayed on the
map screen have already been set,
“Change POI” is displayed.
DISPLAYING MAP
INFORMATION
Information such as POI icons, route
trace, speed limit, etc. can be displayed
on the map screen.
No.FunctionPage
Select to display the select-
ed POI icons.
Select to select or change
POI icons.86
*Select to display
eDestination icons.326
Select to display route
trace.88
*Select to display traffic in-
formation.91
Select to display speed limit
icon.
*: This function is not made available on some models.
SELECTING THE POI ICONS
No.FunctionPage
ES350_300h_Navi_OM33C79U_(U).book Page 86 Wednesday, June 22, 2016 2:54 PM

87
1. BASIC OPERATION
ES350/300h_Navi_OM33C79U_(U)16.06.22 14:51
NAVIGATION SYSTEM
3
3Select the desired POI category and se-
lect “OK” .■SELECTING OTHER POI ICONS
TO BE DISPLAYED
1Select “Other POIs” .
2Select the desired POI categories and
select “OK”.
“List All Categories” : Select to display all
POI categories. To add more POI catego-
ries, select “More”.
No.Information/FunctionPage
Displays up to 5 selected
POI icons on the map
screen.−
Select to cancel the select-
ed POI icons.−
Displays up to 6 POI icons
as favorite POI categories134
Select to display other POI
categories if the desired
POIs cannot be found on
the screen.
87
Select to search for the
nearest POIs.88
ES350_300h_Navi_OM33C79U_(U).book Page 87 Wednesday, June 22, 2016 2:54 PM

88
1. BASIC OPERATION
ES350/300h_Navi_OM33C79U_(U)16.06.22 14:51
■DISPLAYING THE LOCAL POI
LIST
1Select “Find Local POI” .
2Select the desired POI.
“Near...” : Select to search for POIs near the
current position or along the route.
3Check that the selected POI is dis-
played on the map screen.
X When “Near...” is selected
1Select the desired item.
■START RECORDING THE ROUTE
TRACE
1Display the “Map Information” screen.
(→ P.86)
2Select “Route Trace”.
zThe “Route Trace” indicator illuminates and
the route trace starts.
3Check that the traveled line is displayed.
POIs that are within 20 miles (32 km) of
the current position will be listed from
among the selected categories.
No.Function
Select to search for POIs near the
current position.
Select to search for POIs along the
route.
ROUTE TRACE
The traveled route can be stored and re-
traced on the map screen. This feature is
available when the map scale is 30 miles
(50 km) or less.
ES350_300h_Navi_OM33C79U_(U).book Page 88 Wednesday, June 22, 2016 2:54 PM

89
1. BASIC OPERATION
ES350/300h_Navi_OM33C79U_(U)16.06.22 14:51
NAVIGATION SYSTEM
3
■STOP RECORDING THE ROUTE
TRACE
1Display the “Map Information” screen.
(→ P.86)
2Select “Route Trace” again.
3A confirmation screen will be displayed.
“Yes”: Select to keep the recorded
route trace.
“No”: Select to erase the recorded
route trace.
1Place the cursor over an icon.
2Select “Info”.
INFORMATION
●The traveled route can be stored up to
124 miles (200 km).
DISPLAYING INFORMATION
ABOUT THE ICON WHERE
THE CURSOR IS SET
When the cursor is placed over an icon
on the map screen, the name bar is dis-
played on the upper part of the screen. If
“Info” appears on the right side of the
name bar, detailed information can be
displayed.
ES350_300h_Navi_OM33C79U_(U).book Page 89 Wednesday, June 22, 2016 2:54 PM

90
1. BASIC OPERATION
ES350/300h_Navi_OM33C79U_(U)16.06.22 14:51
“Mark”: Select to register as a memory
point. To change the icon, name, etc.:
→ P.126
“Enter ” : Select to set as a destination.
: Select to call the registered
number.
“Delete” : Select to delete destination or
memory point.
“Edit” : Select to display the edit memory
point screen.
“Detail” : Select to display detailed informa-
tion.*
INFORMATION
● Even when traffic information is not cur-
rently being received, traffic information
and “Info” will be displayed for a while
after traffic information has been
received.
● In some situations, calls to a POI may
automatically change to an international
call or may not be possible as a domestic
call.
*: This function is not made available on some models.
STANDARD MAP ICONS
IconName
Island
Park
Industry
Business facility
Airport
Military
University
Hospital
Stadium
Shopping mall
Golf
ES350_300h_Navi_OM33C79U_(U).book Page 90 Wednesday, June 22, 2016 2:54 PM

91
1. BASIC OPERATION
ES350/300h_Navi_OM33C79U_(U)16.06.22 14:51
NAVIGATION SYSTEM
3
4. TRAFFIC INFORMATION*
1Press the “MENU” button on the
Remote Touch.
2Select “Info”.
3Select “Traffic Incidents” .
4Select the desired item.
“Traffic Event List” : Select to display a list of
current traffic information. ( →P.91)
“Predictive Traffic Map” : Select to display a
map with predictive traffic data. (→ P.92)
1Display the “Traffic” screen. (→P.91)
2Select “Traffic Event List” .
3Select the desired traffic information.
“On Current Road” : Select to display traffic
information for the current road.
“On Current Route” : Select to display traf-
fic information for the set route.
z When set to on, the indicator will illuminate.
4Check that the traffic information is dis-
played.
“Detail”: Select to display detailed traffic in-
formation.
Traffic data can be received via HD Ra-
dio broadcast or LEXUS App Suite to
display traffic information on the map
screen.
INFORMATION
● If a large amount of information is being
received, it may take longer than normal
for the information to be displayed on the
screen.
*: This function is not made available on some models.
DISPLAYING TRAFFIC
INFORMATION
A list of current traffic information can
be displayed along with information on
the location and the distance of the inci-
dent.
ES350_300h_Navi_OM33C79U_(U).book Page 91 Wednesday, June 22, 2016 2:54 PM