2017 KIA RIO Features and Functions Guide

7
To view a video on your mobile device, snap these QR Codes or visit the listed website .
Refer to page 2 for more information .
LCD Display Video
LCD Display: Maintenance Video
QR CODES
www.KuTechVideos.com/ub13/2017
www.KuTechVideos.com/ub13/2017
MPG
030
60
INSTFuel
Economy
MPG
0 30
60
INSTFuel
Economy
MPG
0 30
60
INSTFuel
Economy
BackTire Rotation
OFF9000 km
10000 kmBack OFF7500 mi
15000 mi Engine Oil
Set Tire Service Set Oil Service
Notify Later
Maintenance Reset OFF Notify Later
Maintenance Reset OFF
Rotate Tire
Change Engine Oil
Set Alarm
Set AlarmRESETRESET
MPG
030
60
INSTFuel
Economy
MPG
0 30
60
INSTFuel
Economy
MPG
0 30
60
INSTFuel
Economy
BackTire Rotation
OFF9000 km
10000 kmBackOFF 7500 mi
15000 mi
Engine Oil
Set Tire Service Set Oil Service
Notify Later
Maintenance Reset OFF Notify Later
Maintenance Reset OFF
Rotate Tire
Change Engine Oil
Set Alarm
Set Alarm
RESETRESET
MPG
0 30
60
INSTFuel
Economy
MPG
0 30
60
INSTFuel
Economy
MPG
0 30
60
INSTFuel
Economy
BackTire Rotation
OFF9000 km
10000 kmBack OFF7500 mi
15000 mi Engine Oil
Set Tire Service Set Oil Service
Notify Later
Maintenance Reset OFF Notify Later
Maintenance Reset OFF
Rotate Tire
Change Engine Oil
Set Alarm
Set Alarm
RESETRESET
( Type B cluster)
User Settings*
(Type B cluster)
To enter the User Settings mode
in the LCD Instrument Cluster
when the vehicle is at a standstill
and with the ENGINE START/
STOP button* in the ON position or
ignition on, press the TRIP button A to toggle to User Settings . Press and hold the
TRIP button for more than 2 seconds to enter .
Toggle through the menu by pressing the TRIP
button and select the item by pressing the RESET
button B .
User Settings Menu
Car Option:
•Align Steering Wheel*
•Outside Temperature Unit*
•Language
Maintenance:
•Engine Oil
•Tire Rotation
For more information on the User Settings mode, please refer to your Owner’s Manual.
Service Mode (Maintenance)*
(Type B cluster)
When service is required, the following
screens will be displayed:
•Rotate Tire
•Change Engine Oil
To reset or deactivate the Maintenance
system reminder, press the RESET button B for more than one second . Then toggle
to the preference and select by pressing the
RESET button B .
Service (Maintenance) Interval Setting
When in User Settings mode, press the TRIP
button A to toggle to Maintenance and
select by pressing the RESET button B .
When in the Maintenance mode, toggle to
the menu item and press the RESET button B to enter:
•Engine Oil
•Tire
Toggle to your selection and press the
RESET button B to set .
TR IP
RESET
(Located on the right side of the Steering Wheel)
A
B
ALWAYS CHECK THE OWNER’S MANUAL FOR COMPLETE OPER ATING INFORMATION AND SAFET Y WARNINGS. *IF EQUIPPED
INSTRUMENT CLUSTER

8
To help improve your fuel economy: •Drive at a moderate speed, accelerating smoothly and at a moderate rate •Keep tires inflated to the recommended pressure •Be sure the wheels are properly aligned
For more information on Active ECO, refer to your Owner’s Manual or contact your local dealership.
QUICK TIPS
Active ECO System Video To view a video on your mobile device, snap this QR Code or visit the listed website .
Refer to page 2 for more information .
www.KuTechVideos.com/ub13/2017
QR CODE
(Type B Cluster)
(Buttons located on left side of Driver’s Panel)
A
B
Active ECO System*
Active ECO helps improve fuel economy by controlling
several vehicle components . When activated, it optimizes
drivetrain operations such as engine power and transmission
to help improve fuel economy .
To turn ON, press the ACTIVE ECO button A . The green ECO
Indicator light B in the instrument cluster will illuminate,
indicating that the Active ECO is operating . The Active ECO
System will remain on even when the ignition is cycled .
To turn the Active ECO System OFF, press the ACTIVE ECO
button A again .
RIO FEATURES & FUNCTIONS GUIDE
*IF EQUIPPED
INSTRUMENT CLUSTER

9
The ISG system is disabled when: •A seat belt is unfastened •The hood or a door is opened •Battery condition is poor •The front or rear defroster is turned on •Engine coolant temperature is low
•The outside ambient temperature is too low/high •Emission control devices activate •The vehicle is on a steep slope
QUICK TIPS
Idle, Stop and Go System Video To view a video on your mobile device, snap this QR Code or visit the listed website .
Refer to page 2 for more information .
www.KuTechVideos.com/ub13/2017
QR CODE
B
(Buttons located on left side of Driver’s Panel)
(Type B Cluster)
A
Idle, Stop and Go (ISG) System*
The ISG system helps reduce fuel consumption by automatically shutting down
the engine when the vehicle is at a standstill .
When the ISG system is ON and the vehicle is at a standstill the engine will
stop, and the green AUTO STOP indicator on the instrument cluster A will
illuminate and the message Auto Stop will appear in the LCD screen* .
The engine will restart when the brake pedal is released or the shift lever is
moved from D (Drive) to the R (Reverse) position or to Sport mode . When engine
restarts, the green AUTO STOP indicator on the instrument cluster will turn off .
To deactivate the ISG System, press the ISG OFF button B . If you press again,
the system will be activated .
REMINDERS:
•ISG is active by default at vehicle start-up . When ignition is cycled, ISG will turn ON again
•Under certain conditions, the engine will restart automatically
• If the AUTO STOP indicator is illuminated yellow, please contact an authorized Kia dealer
For more information on Idle, Stop and Go System, refer to your Owner’s Manual or contact your local dealership.
ALWAYS CHECK THE OWNER’S MANUAL FOR COMPLETE OPER ATING INFORMATION AND SAFET Y WARNINGS. *IF EQUIPPED
DRIVER'S PANEL

10
Hill-Start Assist Control (HAC)
HAC helps prevent the vehicle from rolling backwards when accelerating
from a stop while on a steep incline .
The HAC automatically activates whether the ESC is OFF or ON but does NOT
activate when the ESC has malfunctioned .
REMINDER: The HAC does not operate when the gear shift is in the P (Park) or the N (Neutral) position .
•
•When HAC is active (e .g ., during initial acceleration from a stop on an incline), you may notice that the brakes will momentarily remain engaged after you depress the accelerator – this is normal HAC operation •HAC provides a 2-second delay before the vehicle may start rolling backwards
QUICK TIPS
(Buttons located on left side of Driver’s Panel)
AB
Instrument Panel Dimmer
With parking lights / headlights ON, toggle switch A up or down to adjust
display brightness of the instrument panel illumination .
REMINDER: The Instrument Panel Dimmer does not adjust brightness on the UVO eServices with Navigation system screen . Use navigation setup to adjust brightness on the navigation system .
Electronic Stability Control (ESC)
The ESC system is designed to help stabilize the vehicle during cornering
maneuvers . It is a good idea to keep the ESC turned ON for daily driving
whenever possible .
Press ESC OFF button B to turn OFF .
REMINDERS:
•ESC is active by default at vehicle start-up . When ignition is cycled, ESC will turn ON again
• The ESC Indicator Light in the instrument cluster will be lit momentarily whenever the ESC is active
For more information on Electronic Stability Control (ESC) and its specific features and operations, please refer to your Owner’s Manual.
RIO FEATURES & FUNCTIONS GUIDE
*IF EQUIPPED
DRIVER'S PANEL

11
R
Power/Heated Outside Mirrors*
Mirror heaters controlled with Rear Defroster .
A
B
DE
C
(Buttons located on the Driver’s Door Panel)
Power Windows, Window Lock & Central Door Lock*
A Pull/Press to operate Driver’s Window Auto Up/Down*
B Press to Unlock /Lock All Doors
C Press Power Window Lock button* to disable all Passenger Windows
Automatic Door Lock/Unlock*
Auto Door Lock /Unlock will engage when the gear shift is moved in to or out of
the P (Park) position .
Refer to your Owner’s Manual for more information on Auto Door Lock/Unlock.
Power Folding Outside Mirrors*
To adjust outside mirror positions, toggle switch D left or right to select mirror,
then press arrows to adjust.
REMINDER: To lock position of mirrors, toggle mirror switch D to the neutral (center) position .

To fold the Power Folding Outside Mirrors, press the folding mirror button E .
Press again to unfold .
ALWAYS CHECK THE OWNER’S MANUAL FOR COMPLETE OPER ATING INFORMATION AND SAFET Y WARNINGS. *IF EQUIPPED
DRIVER'S PANEL

12
Engine Start/Stop Button*
To use the ENGINE START/STOP button, you
must have the Smart Key fob on your person or
inside the vehicle .
To start the engine:
1 . Depress the brake pedal
2 . Press the ENGINE START/STOP button while
gear shift is in P (Park) (or while in Neutral for
Manual Gear Shift)
To turn the engine OFF:
1 . Move gear shift into Park
2 . Press the ENGINE START/STOP button
REMINDERS:
• In an emergency situation while the vehicle is in motion, you are able to turn the engine off and to the ACC position by pressing the ENGINE START/STOP button for more than 2 seconds or 3 times successively within 3 seconds
• If the Smart Key battery is weak or not working properly, hold the Smart Key fob up to the ENGINE START/STOP button (Lock button side closest) and press to start engine
Engine Start/Stop Button and Smart Key Video To view a video on your mobile device, snap this QR Code or visit the listed website .
Refer to page 2 for more information .
www.KuTechVideos.com/ub13/2017
QR CODEAB
To use electrical accessories: ACC position A: •When in the OFF position and without depressing the brake pedal, press the ENGINE START/STOP button once
ON position B: •When already in the ACC position A and without depressing the brake pedal, press the ENGINE START/STOP button again •When in the OFF position and without depressing the brake pedal, press the ENGINE START/STOP button twice B
Keeping the vehicle in ACC or the ON position for extended periods of time without turning engine on may discharge the vehicle’s battery .
QUICK TIPS
RIO FEATURES & FUNCTIONS GUIDE
*IF EQUIPPED
DRIVER'S PANEL

13
Headlights & High Beams
To o p e r a t e :
•Rotate lever to change the Headlight function
•Push lever to turn High Beams ON
•Pull lever to flash Headlights/High Beams
AUTO Light* function — When the light switch is in the AUTO Light
position, the tail lights and headlights will turn ON/OFF automatically
depending on the amount of light outside the vehicle .
Turn Signals & Fog Lights*
To o p e r a t e :
•Turn Signals - Move lever Up/Down for Right /Left Turn Signal
•Fog Lights - Rotate lever ring to turn Fog Lights ON/OFF
REMINDER: Headlights must be ON for Fog Light operation .AUTO
One-Touch Lane Change Signal is activated by moving the Turn Signal
Lever Up/Down slightly for less than 1 second and then releasing . The
lane change signal will blink 3 times .
AUTO*Automatic Headlights position
Headlight position
Parking light position
OFFOFF position
One-Touch Lane Change Signal
AUTO
ALWAYS CHECK THE OWNER’S MANUAL FOR COMPLETE OPER ATING INFORMATION AND SAFET Y WARNINGS. *IF EQUIPPED
STEERING WHEEL CONTROLS

14
Rear Wiper & Washer*
To o p e r a t e :
•Rotate Rear Wiper switch to change wiper modes .
•Push lever to spray and wipe
M I S T: Single wipe
OFF: Wiper off
I N T: Intermittent wipe
LO: Slow wipe
HI: Fast wipe
ON: Normal wiper
INT: Intermittent wipe*
OFF: Wiper off
Windshield Wipers & Washers
To o p e r a t e :
•Move lever Up/Down to change Wiper modes
•Rotate lever ring to adjust Intermittent Wipe Speed
•Pull lever to spray and wipe
FRONT
•Rotating ring up increases Intermittent wipe frequency and wipe speed . Rotating ring down decreases frequency of wipes •Set the wiper to OFF position when the wiper is not in use
On Rear Wipers, intermittent wipe function is not adjustable .
QUICK TIPS QUICK TIP
RIO FEATURES & FUNCTIONS GUIDE
*IF EQUIPPED
STEERING WHEEL CONTROLS