2017 KIA OPTIMA PLUG-IN HYBRID low beam

Service in OFF
0+'-
If the service interval is not set, "Serv‐
ice in OFF" message is displayed on the LCD display.
NOTICE
If any of the following conditions oc‐
curs, the mileage and days may be
incorrect.
(Continued)
(Continued)
-The battery cable is disconnected.
-The fuse switch is turned off.
-The battery is discharged.
Master warning mode (if
equipped)
• This warning light informs the driver of the followingsituations: - Blind Spot Detection (BSD) mal‐ function (if equipped)
- Tire Pressure Monitoring System (TPMS) malfunction (if equipped)
- High Beam Assist (HBA) malfunc‐ tion (if equipped)
- Lamp malfunction
- Service reminder and so on.
The Master Warning Light illuminates if one or more of the above warning sit‐
uations occur. At this time, the LCD
Modes Icon will change from (
) to
().
If the warning situation is solved, the
master warning light will be turned off and the LCD Modes Icon will be changed
back to its previous icon (
).
User settings mode
Description
0+'-
On this mode, you can change setting
of the doors, lamps, and so on.
Features of your vehicle
5-58

Check high beam assist system (if
equipped)
• This warning message illuminates ifthe high beam assist system has a
malfunction.
In this case, we recommend that you
have the vehicle inspected by an au‐ thorized Kia dealer.
Low fuel
• This warning message illuminates if the fuel tank is nearly empty.- When the low fuel level warning light is illuminated.
Add fuel as soon as possible.
Device in wireless charger (if
equipped)
If a smart phone is still left on the wire‐
less charging pad unattended, even when the Engine Start/Stop button is
turned to the ACC or OFF position, and
the instrument panel's one time driving information mode has finished, a warn‐
ing message will light up on the instru‐
ment panel.
For more details, refer to L

LIGHTING
Battery saver function
• The purpose of this feature is to pre‐vent the battery from being dis‐
charged. The system automatically
turns off the parking lights when the driver removes the ignition key and
opens the driver-side door.
• With this feature, the parking lights will turn off automatically if the driv‐
er parks on the side of the road at
night.
If necessary, to keep the lights on when the ignition key is removed,
perform the following: 1. Open the driver-side door.
2. Turn the parking lights OFF and ON again using the light switch on the
steering column.
CAUTION
If the driver gets out of the vehiclethrough other doors (except driver'sdoor), the battery saver functiondoes not operate. Therefore, It cau‐ses the battery to be discharged. Inthis case, make sure to turn off thelamp before getting out of the vehi‐cle.
Headlight escort function (if
equipped)
If you turn the ignition switch to the
ACC or OFF position with the headlights ON, the headlights remain on for about
5 minutes. However, if the driver's door
is opened and closed, the headlights are turned off after 15 seconds.
The headlights can be turned off by
pressing the lock button on the trans‐
mitter (or smart key) twice or turning the light switch to the OFF position.
Daytime running light (if
equipped)
The Daytime Running Lights (DRL) can
make it easier for others to see the front of your vehicle during the day.
DRL can be helpful in many different
driving conditions, and it is especially helpful after dawn and before sunset.
The DRL system will turn the dedicated
lamp OFF when: 1. The headlight or fog lamp switch is ON.
2. The engine is OFF.
❈
Traffic Change (For Europe)
The low beam light distribution is
asymmetric. If you go abroad to a
country with opposite traffic direc‐ tion, this asymmetric part will daz‐
zle oncoming car driver. To prevent
dazzle, ECE regulation demand sev‐
eral technical solutions (ex. auto‐ matic change system, adhesive
sheet, down aiming). This head‐
lamps are designed to adjust in
user setting mode in cluster.
Lighting control
The light switch has a Headlight and a
Parking light position.
To operate the lights, turn the knob at the end of the control lever to one of
the following positions: 1. OFF position
2. Auto light / AFLS position
Features of your vehicle
5-114

CAUTION
•Never place anything over the sen‐sor (1) located on the instrumentpanel. This will ensure better au‐to-light system control.
•Don’t clean the sensor using a win‐dow cleaner. The cleaner mayleave a light film which could inter‐fere with sensor operation.
•If your vehicle has window tint orother types of metallic coating onthe front windshield, the Autolight system may not work prop‐erly.
High beam operation
To turn on the high beam headlamp,
push the lever away from you. The lev‐ er will return to its original position.
The high beam indicator will light when
the headlight high beams are switched
on.
To prevent the battery from being dis‐ charged, do not leave the lights on for a
prolonged time while the engine is not
running.
WARNING
Do not use high beam when thereare other vehicles. Using high beamcould obstruct the other driver’s vi‐sion.
To flash the headlights, pull the lever
towards you. It will return to the nor‐ mal (low beam) position when released.
The headlight switch does not need to
be on to use this flashing feature.
Features of your vehicle
5-116

High Beam Assist (if equipped)
The High Beam Assist is a system that
automatically adjusts the headlamp range (switches between high beam
and low beam) according to the bright‐
ness of other vehicles and road condi‐ tions.
Operating condition
1. Place the light switch in the AUTO position.
2. Turn on the high beam by pushing the lever away from you.
The High Beam Assist (
) indicator
will illuminate. 3. The High Beam Assist will turn on
when vehicle speed is above45 km/h (28 mph). • If the lever is pushed away when the High Beam Assist is operat‐
ing, the High Beam Assist will
turn off and the high beam will
be on continuously. The High
Beam Assist (
) indicator will
turn off.
• If the lever is pulled towards you when the High Beam Assist is op‐
erating, the High Beam Assist willturn off.
4. If the light switch is placed to the headlamp position, the High Beam
Assist will turn off and the low
beam will be on continuously.
The high beam switches to low beam in
the below conditions.
- When the High Beam Assist is off.
- When the light switch is not in the
AUTO position.
- When the headlamp is detected from
the oncoming vehicle.
- When the tail lamp is detected from
the front vehicle.
- When the surrounding is bright
enough high beams are not needed. -
When streetlights or other lights are
detected.
- When vehicle speed is below 35 km/h
(22 mph).
- When headlamp/taillamp of bicycle/
motorcycle is detected.Warning light and message
When the High Beam Assist System is
not working properly, the warning mes‐
sage (L

(Continued)
•When the light from the oncomingor front vehicle is not detected be‐cause of exhaust fume, smoke,fog, snow, etc.
•When the front window is coveredwith foreign matters such as ice,dust, fog, or is damaged.
•When there is a similar shape lampwith the front vehicle’s lamps.
•When it is hard to see because offog, heavy rain or snow.
•When the headlamp is not repairedor replaced at an authorized deal‐er.
•When headlamp aiming is notproperly adjusted.
•When driving on a narrow curvedroad or rough road.
•When driving downhill or uphill.
•When only part of the vehicle infront is visible on a crossroad orcurved road.
•When there is a traffic light, re‐flecting sign, flashing sign or mir‐ror.
(Continued)
(Continued)
•When the road conditions are badsuch as being wet or covered withsnow.
•When the front vehicle’s head‐lamps are off but the fog lampson.
•When a vehicle suddenly appearsfrom a curve.
•When the vehicle is tilted from aflat tire or being towed.
•When the LDWS (Lane DepartureWarning System) or LKAS (LaneKeeping Assist System) warninglight illuminates. (if equipped)
WARNING
•Do not place any accessories,stickers or tint the windshield.
•Have the windshield glass replacedfrom an authorized dealer.
•Do not remove or impact relatedparts of the High Beam Assist sys‐tem.
(Continued)
(Continued)
•Be careful that water doesn’t getinto the High Beam Assist unit.
•Do not place objects on the dash‐board that reflects light such asmirrors, white paper, etc. The sys‐tem may malfunction if sunlight isreflected.
•At times, the Smart High Beamsystem may not work properly, al‐ways check the road conditions foryour safety. When the systemdoes not operate normally, man‐ually change between the highbeam and low beam.
Features of your vehicle
5-118

NOTICE
To turn on the rear fog light switch,
the ignition switch must be in the
ON position.
Headlight leveling device (if
equipped)
Automatic type
It automatically adjusts the headlight
beam level according to the number of passengers and loading weight in the
luggage area.
And it offers proper headlight beam
under various conditions.
WARNING
If it does not work properly eventhough your car is inclined backwardaccording to passenger's posture, orthe headlight beam is irradiated tothe high or low position, we recom‐mend that the system be inspectedby an authorized Kia dealer.Do not attempt to inspect or replacethe wiring yourself.
Manual type
0+'$
To adjust the headlight beam level ac‐
cording to the number of passengers and loading weight in the luggage area,
turn the beam leveling switch.
The higher the number of the switch
position, the lower the headlight beam level. Always keep the headlight beam
at the proper leveling position, or head‐
lights may dazzle other road users.
Listed below are the examples of prop‐ er switch settings. For loading condi‐
tions other than those listed below, ad‐
just the switch position so that the beam level may be the nearest as the
condition obtained according to the list.
Loading conditionSwitchposition
Driver only 0
Driver + Front passenger 0Full passengers (including
driver) 1
Full passengers (including
driver) + Maximum permissi‐ble loading 2
Driver + Maximum permissi‐ble loading 3
Features of your vehicle

5-120

Wiper blades...............................................................................9-36Blade inspection.................................................................... 9-36
Blade replacement................................................................ 9-36
Battery........................................................................................9-39 For best battery service...................................................... 9-39
Battery capacity label.......................................................... 9-40
Battery recharging................................................................9-41
Reset items............................................................................ 9-41
Tires and wheels....................................................................... 9-43 Tire care.................................................................................. 9-43
Recommended cold tire inflation pressures..................... 9-43
Checking tire inflation pressure.......................................... 9-44
Tire rotation........................................................................... 9-45
Wheel alignment and tire balance...................................... 9-46
Tire replacement................................................................... 9-46
Wheel replacement............................................................... 9-47
Tire traction........................................................................... 9-48
Tire maintenance.................................................................. 9-48
Tire sidewall labeling............................................................ 9-48
Low aspect ratio tire ........................................................... 9-51
Fuses........................................................................................... 9-52 Inner panel fuse replacement............................................. 9-53
Engine compartment fuse replacement........................... 9-54
Fuse/relay panel description............................................... 9-56
Light bulbs.................................................................................. 9-70 Bulb replacement precaution.............................................. 9-70
Light bulb position (front)................................................... 9-72
Light bulb position (rear)..................................................... 9-73
Light bulb position (side)......................................................9-73
Headlamp (HID type) bulb replacement............................ 9-74 Headlamp (low beam) bulb replacement.......................... 9-74
Headlamp (high beam) bulb replacement......................... 9-75
Headlamp (high/low beam) LED replacement..................9-76
Front turn signal lamp bulb replacement......................... 9-76
Position lamp + DRL (LED type) bulb replacement..........9-77
Side repeater lamp bulb replacement............................... 9-77
Rear turn signal lamp bulb replacement........................... 9-77
Stop and tail lamp (LED type) bulb replacement............. 9-79
Back-up lamp bulb replacement........................................ 9-79
License plate lamp bulb replacement................................ 9-80
High mounted stop lamp bulb replacement..................... 9-81
Map lamp bulb replacement................................................ 9-81
Vanity mirror lamp bulb replacement............................... 9-81
Room lamp bulb replacement............................................. 9-82
Personal lamp bulb replacement........................................ 9-83
Glove box lamp bulb replacement...................................... 9-83
Trunk lamp bulb replacement............................................. 9-83
Appearance care........................................................................9-85 Exterior care.......................................................................... 9-85
Interior care........................................................................... 9-89
Emission control system ........................................................ 9-91 Crankcase emission control system.................................. 9-91
Evaporative emission control system............................... 9-91
Exhaust emission control system...................................... 9-91


9