2017 KIA OPTIMA PLUG-IN HYBRID ground clearance

0+'
-Changing lanes
Even though the vehicle in the next
lane enters into your lane, it may not
be recognized by the AEB, until it en‐ ters the AEB sensing range.
Especially when the vehicle in the
next lane abruptly enters into your
lane, it is more likely not to be recog‐
nized. Always pay great attention.
0+'
When the stopped vehicle in front
gets out of the lane, it may not be
recognized by your AEB. Always pay great attention.
0+'
- Recognizing the vehicle
When the vehicle in front has heavy
loading extended rearward, or when
the vehicle in front has higher ground clearance, it may induce a hazardous
situation.
Recognizing pedestrians
- The pedestrian is not fully captured
by the camera sensor, or the pedes‐
trian does not walk in the upright po‐ sition.
- The pedestrian moves very fast.
- The pedestrian abruptly appears in
front.
- The pedestrian wears clothes in the
color similar to the background.
- The outside is too bright or too dark.
- The vehicle drives at night or in the
darkness.
- There is an item similar to a person’s
body structure.
- The pedestrian is small.
- The pedestrian has impaired mobility.
- It is difficult to distinguish the pedes‐
trian from the surroundings.
- The sensor recognition is limited.


7-45
7
Driving your vehicle

-There is a group of pedestrians.
WARNING
•Cancel the AEB in the User Set‐tings on the LCD display, beforetowing another vehicle. While tow‐ing, the brake application may ad‐versely affect your vehicle safety.
•Pay great caution to the vehicle infront, when it has heavy loadingextended rearward, or when it hashigher ground clearance.
•The sensor only detects pedes‐trians, not carts, bicycles, motor‐cycles, luggage bags, or strollers.
•The AEB does not operate in a cer‐tain situation. Thus, never test-operate the AEB against a personor an object. It may cause a severeinjury or even death.
NOTICE
The system may temporarily cancel
due to the strong electric waves.
Driving your vehicle

7-46

(Continued)
bearing life, braking and stoppingabilities, handling characteristics,ground clearance, body-to-tireclearance, snow chain clearance,speedometer and odometer calibra‐tion, headlight aim and bumperheight.
Tire traction
Tire traction can be reduced if you drive
on worn tires, tires that are improperly inflated or on slippery road surfaces.
Tires should be replaced when tread
wear indicators appear. Slow down whenever there is rain, snow or ice on
the road to reduce the possibility of
losing control of the vehicle.
Tire maintenance
In addition to proper inflation, correct
wheel alignment helps to decrease tire wear. If you find a tire is worn uneven‐
ly, have your dealer check the wheel
alignment.
When you have new tires installed, make sure they are balanced. This will
increase vehicle ride comfort and tire
life. Additionally, a tire should always be rebalanced if it is removed from the
wheel.
Tire sidewall labeling
0+'- 







This information identifies and de‐
scribes the fundamental characteristics of the tire and also provides the tire
identification number (TIN) for safety
standard certification. The TIN can be used to identify the tire in case of a re‐
call.
1. Manufacturer or brand name
Manufacturer or Brand name is shown.
2. Tire size designation
A tire’s sidewall is marked with a tire size designation. You will need this in‐
formation when selecting replacement
tires for your vehicle. The following ex‐ plains what the letters and numbers in
the tire size designation mean.
Example tire size designation:
(These numbers are provided as an ex‐
ample only; your tire size designator could vary depending on your vehicle.)
P235/55R19 108T
P - Applicable vehicle type (tires
marked with the prefix L