2017 KIA OPTIMA PLUG-IN HYBRID buttons

Lumbar support (if equipped)
0+'-
The lumbar support can be adjusted by
pressing the lumbar support switch on the side of the seat. 1. Press the front portion (1) of the switch to increase support, or the
rear portion (2) of the switch, to
decrease support.
2. Release the switch once it reaches the desired position.
3. Press the upper portion (3) of the switch to move the support posi‐
tion up, or press the lower portion
(4) of the switch, to move the sup‐
port position down. 4. Release the switch once it reaches
the desired position.
Driver position memory system
(if equipped, for power seat)
0+'-
A driver position memory system is
provided to store and recall the driver seat and outside rearview mirror posi‐
tion with a simple button operation. By
saving the desired position into the system memory, different drivers can
reposition the driver seat based upon
their driving preference. If the battery is disconnected, the position memory
will be erased and the driving position
should be restored in the system.
WARNING
Never attempt to operate the driverposition memory system while thevehicle is moving.This could result in loss of control,and an accident causing death, seri‐ous injury, or property damage.
Storing positions into memory
using the buttons on the door
Storing driver's seat positions
1. Shift the shift lever into P (for Au‐ tomatic transaxle) while the engine
start/stop button is ON.
2. Adjust the driver’s seat and outside rearview mirror comfortable for
the driver.
3. Press SET button on the control panel. The system will beep once.
4. Press one of the memory buttons (1 or 2) within 5 seconds after
pressing the SET button. The sys‐ tem will beep twice when memory
has been successfully stored.
Safety features of your vehicle
4-08

Fan speed control
The fan speed can be set to the desired
speed by pushing the fan speed control button.
The higher the fan speed is, the more
air is delivered.
Pressing the OFF button turns off the
fan.
Air conditioning
Press the A/C button to turn the air
conditioning system on (indicator light will illuminate). Press the button again
to turn the air conditioning system off.
OFF mode
Press the front blower OFF button to
turn off the front air climate control system. However, you can still operate
the mode and air intake buttons as long
as the ignition switch is in the ON posi‐
tion.
Features of your vehicle
5-144

Steering wheel audio controls (if
equipped)
5ZQF
"5ZQF
#
5ZQF
%5ZQF
$
5ZQF
&0+'-5ZQF
'
The steering wheel may incorporate
audio control buttons.
CAUTION
Do not operate audio remote controlbuttons simultaneously.
VOLUME (+/-) (1)
• çress the lever upward (+) to increase
the volume.
• çress the lever downward (-) to de‐ crease the volume.
SEEK/PRESET (/) (2)
The êEEK/çéEêET lever has differentfunctions based on the system mode.
For the following functions the lever
should be pressed for 0.8 seconds or more.
éADIO mode
It will function as the AUTO êEEK select
button.
CD/UêB/içod® mode
It will function as the FF/éEW button.
If the êEEK/çéEêET button is pressed
for less than 0.8 seconds, it will work as follows in each mode.
éADIO mode
It will function as the çéEêET êTATION
buttons.
CD/UêB/içod® mode
It will function as TéACK Uç/DOWN
button.
MODE () (3)
çress the button to change audio
source. FM
AM CD UêB/içod ®
AUX
MY MUêIC Bluetooth ®
Wireless Tech‐
nology audio
MUTE () (4)
• çress the button to mute the sound.
• çress the button to turn off the mi‐ crophone during a telephone call.
Detailed information for audio control
buttons are described in L

Auto êtore
çress the [Auto store] button to auto‐
matically save receivable frequencies to çreset buttons.
êcan
çress the
SCAN button to preview fre‐
quencies with superior reception for 5 seconds each.
çress and hold the
SCAN button to
preview presets for 5 seconds each.
Once scan is complete, the previous
frequency will be restored.
While êcan is operating, pressing the
SCAN button will cancel the scan oper‐
ation.
Media mode
Media mode screen
çressing the MEDIA button will change
the operating mode in order of CD
UêB (içod ®
) AUX My Music BT
Audio.
If [çop-up Mode] / [Mode çop-up] is turned on within
/SETUP [Dis‐
play], then pressing the MEDIA button
will display the Media çop-up Mode
screen.
Turn the
TUNE knob to move the fo‐
cus. çress the knob to select.
The media mode pop up screen can be
displayed only when there are two or
more media modes turned on.
Mode Display on the Status Bar
When a Bluetooth ®
Wireless Technolo‐
gy, içod ®
, UêB or AUX device is connec‐
ted or a CD is inserted, the correspond‐
ing mode icon will be displayed.
IconTitle
Bluetooth ®
WirelessTechnolo‐
gy
CD
içod ®
UêB
AUX


6-69
6
Audio system

Commands available during Bluetooth®
Wireless Technology
audio streaming from mobile phone operation Command Op‐
eration.
CommandFunction
çlay çlays the currently paused song.
CommandFunction
çause çauses the current song.
Setup Mode Type B-1
çress the [êETUç] button to display the
êetup screen.
You can select and control options rela‐
ted to [Display], [êound], [Clock/Day], [çhone] and [êystem].
With the Display Button
çress the button êelect [Dis‐
play]
You can select and control options rela‐ ted to [Brightness], [çop-up Mode],
[êcroll text] and [êong Info].
Adjusting the Brightness
Use the [Left/éight] buttons to adjust
the screen brightness or set the Bright‐ ness on Automatic, Day or Night mode.
çress the [Default] button to reset. • Automatic: Adjusts the brightness automatically.
• Day: Always maintains the brightness on high.
• Night: Always maintains the bright‐ ness on low.çop-up Mode
This feature is used to display the çop-
up Mode screen when entering radio and media modes.
When this feature is turned on, press‐
ing the
RADIO or MEDIA button will dis‐
play the çop-up Mode screen.
Audio system
6-104

NOTICE
The media çop-up Mode screen can
be displayed only when two or more
media modes have been connected.
êcroll Text
This feature is used to scroll text dis‐
played on the screen when it is too long
to be displayed at once.
When turned on, the text is repeatedly
scrolled. When turned off, the text is
scrolled just once.
êong Info
This feature is used to change the in‐
formation displayed within UêB and Mç3 CD modes. • Folder File: Displays file name and folder name.
• Album Artist êong: Displays album name/artist name/song.
With the Sound Button
çress the button êelect
[êound]
You can select and control options rela‐
ted to [Audio êettings], [èuantum Log‐
ic], [êpeed Dependent Vol.], [Volume Dialogue] and [Touch êcreen Beep].
Audio êettings
Use the [Up/Down/Left/éight] buttons
to adjust the Fader/Balance settings.
Use the [Left/éight] buttons to adjust the Bass/Middle/Treble settings.
çress the [Default] button to reset.

6-105
6
Audio system

èLê (èuantum Logic êurround)
èLê can be set by selecting from On/
Off.
êDVC (êpeed Dependent Volume Con‐trol)
The volume level is controlled automat‐ ically according to the vehicle speed.
êDVC can be set by selecting from On/
Off.
Volume Dialogue (if equipped)
Use the [-], [+] buttons to adjust the
Volume Dialog.
Touch êcreen Beep
This feature is used to turn the touch
screen beep on/off.
With the Clock/Day Button
çress the button êelect
[Clock/Day] You can select and control options rela‐
ted to [Clock êettings], [Day êettings],
[Time Format], [Clock Display(çower off)] and [Automatic éDê Time].
Clock êettings
Use the [Up/Down] buttons to set the
Hour, Minutes and AM/çM setting.
çress and hold the
/button (over 0.8 seconds) to display the
Clock/Day screen.
Audio system
6-106

Day êettings
Use the [Up/Down] buttons to set the
Day, Month and Year setting.
Time Format
This feature is used to change the clock
format between 12hr or 24hr.
Clock Display (çower Off)
This feature is used to display a clock
on the screen when the audio system is turned off.
Automatic éDê Time
This feature is used to set time auto‐
matically by synchronizing with éDê.
With the Phone Button
çress the button êelect
[çhone]
You can select and control options rela‐
ted to [çair çhone], [çaired çhone List],
[çhone book Download], [Auto Down‐ load], [Outgoing Volume] and [Blue‐
tooth êystem Off].
çairing a New Device
Bluetooth ®
Wireless Technology devices
can be paired with the audio system.
For more information, refer to L