2017 KIA OPTIMA PLUG-IN HYBRID audio

- File name : Maximum 64 Englishcharacters
- Folder name : Max 32 English characters
❈ Using the scroll feature allows you
to see the entire name of files with
names that are too long to be dis‐
played at once.
• Compatibility by Disc Type 1. çlaying MIXED CDs : First plays the audio CD, then plays the com‐
pressed file(s).
2. çlaying EXTéA CDs : First plays the audio CD, then plays the com‐
pressed file(s).
3. çlaying multisession CDs : çlays in order of sessions- MIXED CD : CD type in which both Mç3 and audio CD files arerecognized in one disc.
- Multisession CD CD type that in‐ cludes more than two sessions.
Different from Extra CDs, multi‐ session CDs are recorded bysessions and have no media lim‐
itation.
• çrecautions upon Writing CDs 1. In all cases except when creating
multisession discs, check the close
session option before creating the disc. Though product malfunctions
will not occur, some time may be
required for the device to check
whether the session state is
closed (approximately 25 seconds).
(Additional time may also be re‐
quired depending on the numberof folders or files.)
2. Changing the Mç3/WMA file exten‐ sions or changing files of other ex‐
tensions to Mç3/WMA may result
in product malfunction.
3. When naming files with Mç3/WMA file extensions, write using only
Korean and English. (Languages
other than Korean and English are
not supported and are displayed asblank.)
4. Unauthorized use or duplication of music files are prohibited by law.
5. çrolonged use of CD-é/CD-éW discs that do not satisfy relatedstandards and/or specifications
could result in product malfunc‐
tion.NOTICE
nUsing the UêB Device
•Connect the UêB device after
turning on the engine. The UêB
device may become damaged if it
is already connected when the ig‐
nition is turned on. The UêB device
may not operate properly if the
car ignition is turned on or off with
the UêB device connected.
•Heed caution to static electricity
when connecting/disconnecting
UêB devices.
•Encoded Mç3 çlayers will not be
recognized when connected as an
external device.
•When connecting an external UêB
device, the device may not proper‐
ly recognize the UêB is in some
states.
•Only products formatted with
byte/sectors under 64Kbyte will
be recognized.
(Continued)
Audio system
6-58

(Continued)
•This device recognizes UêB devices
formatted in FAT 12/16/32 file
formats. This device does not rec‐
ognize files in NTFê file format.
•êome UêB devices may not be
supported due to compatibility is‐
sues.
•Avoid contact between the UêB
connector with bodily parts or for‐
eign objects.
•éepeated connecting/disconnect‐
ing of UêB devices within short pe‐
riods of time may result in product
malfunction.
•A strange noise may occur when
disconnecting the UêB.
•Make sure to connect/disconnect
external UêB devices with the au‐
dio power turned off.
(Continued)
(Continued)
•The amount of time required to
recognize the UêB device may dif‐
fer depending on the type, size or
file formats stored in the UêB.
êuch differences in time are not
indications of malfunctions.
•The device only supports UêB de‐
vices used to play music files.
•UêB images and videos are not
supported.
•Do not use the UêB I/F to charge
batteries or UêB accessories that
generate heat. êuch acts may lead
to worsened performance or dam‐
age to the device.
•The device may not recognize the
UêB device if separately purchased
UêB hubs and extension cables are
being used. Connect the UêB di‐
rectly with the multimedia termi‐
nal of the vehicle.
(Continued)
(Continued)
•When using mass storage UêB de‐
vices with separate logical drives,
only files saved to the root drive
can be played.
•Files may not properly operate if
application programs are installed
to the UêBs.
•The device may not operate nor‐
mally if Mç3 çlayers, cellular
phones, digital cameras, or other
electronic devices (UêB devices not
recognized as portable disk drives)
are connected with the device.
•Charging through the UêB may not
work for some mobile devices.
•The device may not support nor‐
mal operation when using a UêB
memory type besides (Metal Cover
Type) UêB Memory.
•The device may not support nor‐
mal operation when using formats
such as HDD Type, CF, or êD Mem‐
ory.
(Continued)

6-59
6
Audio system

(Continued)
•The device will not support files
locked by DéM (Digital éights Man‐
agement.)
•UêB memory sticks used by con‐
necting an Adaptor (êD Type or CF
Type) may not be properly recog‐
nized.
•The device may not operate prop‐
erly when using UêB HDDs or UêBs
subject to connection failures
caused by vehicle vibrations. (e.g.
i-stick type)
• Avoid use of UêB mem‐
ory products that can
also be used as key
chains or mobile phone
accessories. Use of
such products may
cause damage to the
UêB jack.
Use of such products may cause
damage to the UêB jack.
(Continued)
(Continued)
•Connecting an Mç3 device or
phone through various channels,
such as AUX/BT or Audio/UêB
mode may result in pop noises or
abnormal operation.
NOTICE
nUsing the içod® device
•içod® is a registered trademark of
Apple Inc.
•In order to use the içod® while op‐
erating the keys, you must use a
dedicated içod® cable. (the cable
that is supplied when purchasing
içod®/içhone® products)
•If the içod® is connected to the
vehicle while it is playing, a high
pitch sound could occur for ap‐
proximately 1-2 seconds immedi‐
ately after connecting. If possible,
connect the içod® to the vehicle
with the içod® stopped/paused.
(Continued)
(Continued)
•During ACC ON state, connecting
the içod® through the içod® cable
will charge the içod® through the
car audio system.
•When connecting with the içod®
cable, make sure to fully insert the
jack to prevent communication in‐
terference.
•When the Eè features of an exter‐
nal device, such as the içod®, and
the audio system are both active,
Eè effects could overlap and cause
sound deterioration and distortion.
Whenever possible, turn off the Eè
feature within the external device
upon use by connecting with the
audio system.
•Noise may occur when an içod® or
AUX device is connected. When
such devices are not being used,
disconnect the device for storage.
(Continued)
Audio system
6-60

(Continued)
•When the içod® or AUX device
power is connected to the power
jack, playing the external device
may result in noise. In such cases,
disconnect the power connection
before use.
•êkipping or improper operation
may occur depending on the char‐
acteristics of your içod®/içhone®
device.
•If your içhone® is connected to
both the Bluetooth® Wireless
Technology and UêB, the sound
may not be properly played. In
your içhone®, select the Dock con‐
nector or Bluetooth® Wireless
Technology to change the sound
output (source).
•içod® mode cannot be operated
when the içod® cannot be recog‐
nized due to the playing of ver‐
sions that do not support commu‐
nication protocols, cases of içod®
abnormalities and defects.
(Continued)
(Continued)
•For fifth generation içod® Nano
devices, the içod® may not be rec‐
ognized when the battery level is
low. çlease charge the içod® for
use.
•êearch/play orders shown within
the içod® device may differ with
the orders shown within the audio
system.
•If the içod® malfunctions due to
an içod® device defect, reset the
içod® and try again. (To learn
more, refer to your içod® manual)
•êome içod®s may not sync with
the êystem depending on its ver‐
sion. If the Media is removed be‐
fore the Media is recognized, then
the system may not properly re‐
store the previously operated
mode. (içad charging is not sup‐
ported.)
•Beside support 1M cable when
purchasing içod®/içhone® prod‐
ucts, Long Cable cannot be recog‐
nized.
NOTICE
nUsing the Bluetooth® Wireless
Technology Audio Mode
•Bluetooth® Wireless Technology
Audio Mode can be used only when
a Bluetooth® Wireless Technology
phone has been connected.
•Bluetooth® Wireless Technology
Audio Mode will not be available
when connecting mobile phones
that do not support this feature.
•While Bluetooth® Wireless Tech‐
nology Audio is playing, if the
Bluetooth® Wireless Technology
phone is connected, then the mu‐
sic will also stop.
•Moving the Track up/down while
playing Bluetooth® Wireless Tech‐
nology audio mode may result in
pop noises in some mobile phones.
•Bluetooth® Wireless Technology
streaming audio may not be sup‐
ported in some mobile phones.
(Continued)

6-61
6
Audio system

(Continued)
•When returning to Bluetooth®
Wireless Technology Audio mode
after ending a call, the mode may
not automatically restart in some
mobile phones.
•éeceiving an incoming call or mak‐
ing an outgoing call while playing
Bluetooth® Wireless Technology
Audio may result in audio interfer‐
ence.
NOTICE
nUsing the Bluetooth® Wireless
Technology Cellular çhone
•Bluetooth® Wireless Technology
Handsfree refers to a device which
allows the user to conveniently
make phone calls with Bluetooth®
Wireless Technology mobile
phones through the audio system.
(Continued)
(Continued)
•Bluetooth® Wireless Technology
allows devices to be connected in a
short distance, including handsfree
devices, stereo headsets, wireless
remote controllers, etc. For more
information, visit the
Bluetooth®
Wireless Technology website at
www.Bluetooth.com. Before using
Bluetooth® Wireless Technology
audio features.
•The Bluetooth® word mark and
logos are registered trademarks
owned by Bluetooth® êIG, Inc. and
any use of such marks by Kia is
under license. Other trademarks
and trade names are those of
their respective owners. A Blue‐
tooth® enabled cell phone is re‐
quired to use Bluetooth® Wireless
Technology.
•Bluetooth® Wireless Technology
features supported within the ve‐
(Continued)
(Continued)
hicle are as follows. êome features
may not be supported depending
on your Bluetooth® Wireless Tech‐
nology device.
-Answering and placing Blue‐
tooth® Wireless Technology
Handsfree calls
-Menu operation during call
(êwitch to çrivate, êwitch to call
waiting, Outgoing volume)
-Download Call History
-Download Mobile çhone book
-çhone book/Call History Auto
Download
-Bluetooth® Wireless Technology
device auto connection
-Bluetooth® Wireless Technology
Audio
(Continued)
Audio system
6-62

(Continued)
•Before using Bluetooth® Wireless
Technology related features of the
audio system, refer your phoneL

(Continued)
automatically connected. Even if
you are outside, the Bluetooth®
Wireless Technology phone will be
automatically connected once you
are in the vicinity of the vehicle. If
you do not want to automatically
connect your Bluetooth® Wireless
Technology phone, try the follow‐
ing.
1.Turn off the Bluetooth® Wire‐
less Technology feature in your
mobile phone.
2.Turn off the Bluetooth® Wire‐
less Technology feature in your
car audio system.
-To turn off the Bluetooth®
Wireless Technology feature
in your car audio system, go
to [êETUç] > [çhone] and
[turn off] the Bluetooth®
Wireless Technology feature.
•Bluetooth® Wireless Technology
connection may become intermit‐
tently disconnected in some mo‐
(Continued)
(Continued)
bile phones. Follow these steps to
try again.
1.Turn the Bluetooth® Wireless
Technology function within the
mobile phone off/on and try
again.
2.Turn the mobile phone power
Off/On and try again.
3.Completely remove the mobile
phone battery, reboot, and then
again.
4.éeboot the audio system and
try again.
5.Delete all paired devices, pair
and try again.
•It is possible to pair up to five
Bluetooth® Wireless Technology
devices to the car system.
•çhone contact names should be
saved in English or they may not
be displayed correctly.
•The Hands-free call volume and
quality may differ depending on
the mobile phone.
(Continued)
(Continued)
•Only one Bluetooth® Wireless
Technology device can be connec‐
ted at a time.
•In some mobile phones, starting
the ignition while talking through
Bluetooth® Wireless Technology
enabled hands-free call will result
in the call becoming disconnected.
(êwitch the call back to your mo‐
bile phone when starting the igni‐
tion.)
•If the mobile phone is not paired or
connected, it is not possible to en‐
ter çhone mode. Once a phone is
paired or connected, the guidance
screen will be displayed.
Audio system
6-64

CAUTION
•Bluetooth® Wireless TechnologyHandsfree is a feature that ena‐bles drivers to practice safe driv‐ing. Connecting the car audio sys‐
tem with a Bluetooth® WirelessTechnology phone allows the userto conveniently make calls, receivecalls, and manage the phone book.
Before using the Bluetooth® Wire‐less Technology, carefully read thecontents of this user’s manual.
•Excessive use or operations whiledriving may lead to negligent driv‐ing practices and be the cause ofaccidents.
•Do not operate the device exces‐sively while driving.
•Viewing the screen for prolongedperiods of time is dangerous andmay lead to accidents.
•When driving, view the screen onlyfor short periods of time.
NOTICE
nUsing the Voice éecognition
•When using the voice recognition
feature, only commands listed
within the user's manual are sup‐
ported.
•Be aware that during the opera‐
tion of the voice recognition sys‐
tem, pressing any key other than
the button or touching the
screen will terminate voice recog‐
nition mode.
•For superior voice recognition per‐
formance, position the microphone
used for voice recognition above
the head of the driverL