Page 407 of 686

Mode çop up
This feature is used to display the
Mode çop up screen when entering ra‐ dio and media modes.
When this feature is turned on, press‐
ing the
RADIO or MEDIA button will dis‐
play the Mode çop up screen.
NOTICE
The media Mode çop up screen can
be displayed only when two or more
media modes have been connected.
Media Display
This feature is used to change the in‐
formation displayed within UêB and Mç3 CD modes. • Folder File: Displays file name and folder name. • Album Artist êong: Displays album
name/artist name/song.
With the Sound Button
çress the SETUP button êelect
[êound]
You can select and control options rela‐ ted to [êound êetting], [èuantum Logic
êound], [êpeed Dependent Vol.] and
[Touch êcreen Beep].
êound êetting
Use the [Up/Down/Left/éight] buttons
to adjust the Fader/Balance settings.
Use the [Left/éight] buttons to adjust the Bass/Middle/Treble settings.
çress the [Default] button to reset.
èLê (èuantum Logic êurround)
èLê can be set by selecting from On/
Off.
Audio system
6-116
Page 468 of 686

• Shift into N (Neutral) if equipped withan Automatic Transaxle / Dual clutch
transmissione.
• Press the CANCEL/O button located on the steering wheel.
• Decrease the vehicle speed lower than the memory speed by approxi‐
mately 20 km/h (12 mph) .
• Decrease the vehicle speed to less than approximately 25 km/h
(15 mph) .
Each of these actions will cancel cruise
control operation (the cruise set indica‐
tor light will go off), but it will not turn the system off. If you wish to resume
cruise control operation, move up the
lever (to RES+) located on your steering wheel. You will return to your previous‐
ly preset speed.To resume cruising speed at
more than approximately 30
km/h (20 mph)
5 Z Q F "
0 + '
5 Z Q F #
0 + ' -
If any method other than the CRUISE/ button was used to cancel cruising
speed and the system is still activated,
the most recent set speed will auto‐ matically resume when the RES+ switch is pushed.
It will not resume, however, if the vehi‐
cle speed has dropped below approxi‐
mately 30 km/h (20 mph).
To turn cruise control off, do
one of the following:
• Press the CRUISE/ button (the
cruise indicator light will be turned off).
• If your vehicle equipped the speed limit system, press the CRUISE/
button twice. (The cruise indicator
light will be turned off.)
• Turn the engine start/stop button off.
Both of these actions cancel cruise con‐ trol operation. If you want to resume
cruise control operation, repeat the
steps provided in L
Page 469 of 686
SPEED LIMIT CONTROL SYSTEM (IF EQUIPPED)
You can set the speed limit when you
do not want to drive over a specific
speed.
If you drive over the preset speed limit, the warning system operates (set
speed limit will blink and chime will
sound) until the vehicle speed returns within the speed limit.
NOTICE
While speed limit control is in opera‐
tion, the cruise control system can‐
not be activated.
To set speed limit:
0 + ' - #
1. Press the cruise switch twice to set speed limit. Once you press it only
one time, the cruise control system
is ready.
0 + ' -
The speed limit indicator light will
illuminate.
0 + ' - $
0 + ' - #
2. Move the lever down (to SET-).
Driving your vehicle
7-52
Page 470 of 686

3. Move the lever up (to RES+) ordown (to SET-), and release it at
the desired speed. Move the lever
up (to RES+) or down (to SET-) and
hold it. The speed will increase or
decrease by 5 km/h (3 mph) .
Move the lever up (to RES+) or
down (SET-) and release it immedi‐
ately. The speed will increase or decrease by 1 km/h.
The set speed limit will display on
the instrument cluster.
0 + ' -
The set speed limit will be displayed. To
drive over the preset speed limit you must depress hard on the accelerator
pedal (more than approximately 80%)
until the kick down mechanism works with a clicking noise. Then the set
speed limit will blink and chime will
sound until you return the vehicle speed within the speed limit.
NOTICE
•Depressing the accelerator pedal
less than approximately 50%, the
vehicle will not speed over the pre‐
set speed limit but maintain the
vehicle speed within the speed lim‐
it.
•A clicking noise heard from the
kick down mechanism by depress‐
ing the accelerator pedal fully is a
normal condition.
To turn off the speed limit
control, do one of the following:
0 + ' - #
7-53
7
Driving your vehicle
Page 471 of 686
• Press the cruise switch.
• Turn the engine start/stop buttonoff.
If you press the cancel O switch once, the set speed limit will cancel, but it will
not turn the system off. If you wish to
reset the speed limit, move the lever up (to RES+) or down (to SET-) to the de‐
sired speed.
0 + ' -
CAUTION
The L
Page 492 of 686