2017 KIA OPTIMA PLUG-IN HYBRID display

(Continued)
•Always check the surroundingareas near your vehicle for people,especially children, before shiftinga vehicle into D (Drive) or R (Re‐verse).
•Before leaving the driver’s seat, al‐ways make sure the shift lever isin the P (Park) position; then setthe parking brake fully and shutthe engine off. Unexpected andsudden vehicle movement can oc‐cur if these precautions are notfollowed in the order identified.
•Do not use the engine brake (shift‐ing from a high gear to lower gear)rapidly on slippery roads.The vehicle may slip causing an ac‐cident.
CAUTION
•To avoid damage to your trans‐axle, do not accelerate the enginein R (Reverse) or any forward gearposition with the brakes on.
(Continued)
(Continued)
•When stopped on an uphill grades,do not hold the vehicle stationarywith engine power. Use the brakepedal or the parking brake.
•Do not shift from N (Neutral) or P(Park) into D (Drive), or R (Reverse)when the engine is above idlespeed.
Transaxle ranges
The indicator lights in the instrument
cluster displays the shift lever position when the engine start/stop button
switch is in the ON position.
P (Park)
Always come to a complete stop before
shifting into P (Park). This position locks the transaxle and prevents the
front wheels from rotating.
To shift from P (Park), you must de‐
press firmly on the brake pedal and make sure your foot is off the acceler‐
ator pedal.
If you have done all of the above andstill cannot shift the lever out of P(Park), see L

AUTO HOLD deactivating. Pressbrake pedal
5ZQF
"
0+'-
5ZQF
#
0+'-
When the conversion from Auto Hold to
EPB is not working properly a warning will sound and a message will appear.
NOTICE
When this message is displayed, the
Auto Hold and EPB may not operate.
For your safety, depress the brake
pedal.
Press brake pedal to deactivateAUTO HOLD
5ZQF
"
0+'-
5ZQF
#
0+'-
If you did not apply the brake pedal
when you release the Auto Hold by pressing the [AUTO HOLD] switch, a
warning will sound and a message will
appear.
AUTO HOLD conditions not met.Close door, hood, and fastenseatbelt
0+'-
When you press the [AUTO HOLD]
switch, if the driver’s door, engine hood are not closed or the driver’s seat belt
is unfastened, a warning will sound and
a message will appear on the LCD dis‐ play. At this moment, press the [AUTO
HOLD] button after closing the driver’s
door, engine hood and fastening the seat belt.

7-27
7
Driving your vehicle

The driver can activate the AEB by
placing the engine start/stop button switch to the ON position and by se‐
lecting 'User Settings', 'Driving Assist',
and 'Autonomous Braking System'. The AEB deactivates, when the driver can‐
cels the system setting.
The warning light illuminates on the LCD display, when youcancel the AEB system.
The driver can monitor the AEBON/OFF status on the LCD display.
When the warning light remains ON
with the AEB activated, we recom‐
mend you to have the system checked
by an authorized Kia dealer.
5ZQF
"
0+'-#
5ZQF
#
0+'-#
The driver can select the initial warning
activation time in the User Settings in the instrument cluster LCD display. The
options for the initial Forward Collision
Warning include the following:
Driving your vehicle
7-38

EARLY - When this condition is se‐lected, the initial Forward
Collision Warning is activa‐ted earlier than normal.This setting maximizesthe amount of distance
between the vehicle or
pedestrian ahead beforethe initial warning occurs.
NORMAL - When this condition is se‐
lected, the initial Forward
Collision Warning is activa‐ted normally. This settingallows for a nominalamount of distance be‐
tween the vehicle or pe‐
destrian ahead before theinitial warning occurs.
LATE - When this condition is se‐ lected, the initial Forward
Collision Warning is activa‐ted later than normal.
This setting reduces theamount of distance be‐
tween the vehicle or pe‐
destrian ahead before theinitial warning occurs.Prerequisite for activation
The AEB gets ready to be activated,when the AEB is selected on the LCD
display, and when the following prereq‐
uisites are satisfied.
- The ESC is activated.
- The driving speed is over 10 km/h.
(However, AEB is activated within
certain driving speed.)
- When recognizing the vehicle or the
pedestrian in front. (However, AEB
does not activate according to condi‐
tions in front and vehicle systems, but it notices only certain warnings.)
WARNING
•The AEB automatically activatesupon placing the ignition switch tothe ON position. The driver can de‐activate the AEB by canceling thesystem setting on the LCD display.
•The AEB automatically deactivatesupon canceling the ESC. When theESC is canceled, the AEB cannot beactivated on the LCD display.
(Continued)
(Continued)
•Set or cancel AEB with controllingswitches on steering wheel afterstopping the vehicle in a safe placefor your safety.
AEB warning message and
system control
The AEB produces warning messages
and warning alarms in accordance with the collision risk levels of followings like
vehicle’s sudden braking in front or lack
of vehicle to vehicle distance or collision to pedestrians. Also, it controls the
brakes in accordance with the collision
risk levels.

7-39
7
Driving your vehicle

Forward warning (1st warning)
0+'-
The warning message appears on the
LCD display with the warning alarms.
Collision warning (2nd warning)
0+'-
• The warning message appears on the LCD display with the warning alarms.
• The AEB controls the brakes within certain limit to release shock fromthe collision.
Emergency braking (3rd warning)
0+'-
• The warning message appears on the LCD display with the warning alarms.
• The AEB controls the brakes within certain limit to release shock fromthe collision.
The AEB controls the maximum
brakes just before the collision.
Brake operation
• In an urgent situation, the braking system enters into the ready status
for prompt reaction against the driv‐ er’s depressing the brake pedal.
Driving your vehicle
7-40

-There is a group of pedestrians.
WARNING
•Cancel the AEB in the User Set‐tings on the LCD display, beforetowing another vehicle. While tow‐ing, the brake application may ad‐versely affect your vehicle safety.
•Pay great caution to the vehicle infront, when it has heavy loadingextended rearward, or when it hashigher ground clearance.
•The sensor only detects pedes‐trians, not carts, bicycles, motor‐cycles, luggage bags, or strollers.
•The AEB does not operate in a cer‐tain situation. Thus, never test-operate the AEB against a personor an object. It may cause a severeinjury or even death.
NOTICE
The system may temporarily cancel
due to the strong electric waves.
Driving your vehicle

7-46

3. Move the lever up (to RES+) ordown (to SET-), and release it at
the desired speed. Move the lever
up (to RES+) or down (to SET-) and
hold it. The speed will increase or
decrease by 5 km/h (3 mph) .
Move the lever up (to RES+) or
down (SET-) and release it immedi‐
ately. The speed will increase or decrease by 1 km/h.
The set speed limit will display on
the instrument cluster.
0+'-
The set speed limit will be displayed. To
drive over the preset speed limit you must depress hard on the accelerator
pedal (more than approximately 80%)
until the kick down mechanism works with a clicking noise. Then the set
speed limit will blink and chime will
sound until you return the vehicle speed within the speed limit.
NOTICE
•Depressing the accelerator pedal
less than approximately 50%, the
vehicle will not speed over the pre‐
set speed limit but maintain the
vehicle speed within the speed lim‐
it.
•A clicking noise heard from the
kick down mechanism by depress‐
ing the accelerator pedal fully is a
normal condition.
To turn off the speed limit
control, do one of the following:
0+'-#

7-53
7
Driving your vehicle

SPEED LIMIT INFORMATION FUNCTION (SLIF) (IF EQUIPPED)
06.
The system displays the information of
speed limit and no passing restriction to the driver in both the instrument
cluster and navigation screen. SLIF de‐
tects traffic signs with camera system attached on the top of the windscreen.
The SLIF also utilizes the navigation in‐
formation to display the speed limit in‐
formation.
WARNING
•Speed Limit Information Functionis only an aid and is not alwaysable to correctly display speed lim‐its and overtaking restrictions.
•The driver always keeps the re‐sponsibility not to exceed themaximum allowed speed.
•Do not place any accessories,stickers or tint the windshield nearthe rearview mirror.
•The system detects traffic signsand displays speed limit informa‐tion by a camera therefore, if traf‐fic signs are hard to detect, thesystem may not work properly.Please refer to L