2017 KIA OPTIMA PLUG-IN HYBRID brake

-There is a group of pedestrians.
WARNING
•Cancel the AEB in the User Set‐tings on the LCD display, beforetowing another vehicle. While tow‐ing, the brake application may ad‐versely affect your vehicle safety.
•Pay great caution to the vehicle infront, when it has heavy loadingextended rearward, or when it hashigher ground clearance.
•The sensor only detects pedes‐trians, not carts, bicycles, motor‐cycles, luggage bags, or strollers.
•The AEB does not operate in a cer‐tain situation. Thus, never test-operate the AEB against a personor an object. It may cause a severeinjury or even death.
NOTICE
The system may temporarily cancel
due to the strong electric waves.
Driving your vehicle

7-46

CRUISE CONTROL SYSTEM (IF EQUIPPED)
5ZQF
"
0+'
5ZQF
#
0+'-
1. Cruise indicator
2. Cruise set indicator
The cruise control system allows you to
program the vehicle to maintain a con‐
stant speed without pressing the accel‐ erator pedal. This system is designed to function
above approximately 30 km/h
(20 mph).
WARNING
•If the cruise control is left on(cruise indicator light is illumina‐ted), the cruise control can beswitched on accidentally. Keep thecruise control system off whenthe cruise control is not in use, toavoid inadvertently setting aspeed.
•Use the cruise control system onlywhen traveling on open highwaysin good weather.
•Do not use the cruise control whenit may not be safe to keep the ve‐hicle at a constant speed, for in‐stance, driving in heavy or varyingtraffic, or on slippery (rainy, icy orsnow covered) or winding roads orover 6% up-hill or down-hill roads.
•Pay particular attention to thedriving conditions whenever usingthe cruise control system.
(Continued)
(Continued)
•Be careful when driving downhillusing the cruise control system,which may increase the vehiclespeed.
CAUTION
During cruise-speed driving of amanual transaxle vehicle, do notshift into neutral without depressingthe clutch pedal, since the enginewill be over revved. If this happens,depress the clutch pedal or releasethe cruise control ON-OFF switch.
NOTICE
•During normal cruise control oper‐
ation, when the SET switch is acti‐
vated or reactivated after applying
the brakes, the cruise control will
energize after approximately 3
seconds. This delay is normal.
(Continued)

7-47
7
Driving your vehicle

(Continued)
•To activate cruise control, depress
the brake pedal at least once after
turning the engine start/stop but‐
ton switch to the ON position or
starting the engine. This is to
check if the brake switch which is
important part to cancel cruise
control is in normal condition.
Cruise control switch
0+'-
CANCEL/O: Cancels cruise control oper‐
ation. CRUISE/
: Turns cruise control system
on or off.
RES+: Resumes or increases cruise con‐ trol speed.
SET-: Sets or decreases cruise control
speed.
To set cruise control speed:
5ZQF
"
0+'
5ZQF
#
0+'-
1. Press the CRUISE/ button on the
steering wheel, to turn the system
on. The cruise indicator light will il‐
luminate.
2. Accelerate to the desired speed, which must be more than approxi‐
mately 30 km/h (20 mph).
NOTICE
nManual transaxle
For manual transaxle vehicles, you
should depress the brake pedal at
least once to set the cruise control
after starting the engine.
Driving your vehicle
7-48

To decrease the cruising speed:
5ZQF
"
0+'
5ZQF
#
0+'-
Follow either of these procedures:• Move the lever down (to SET-) and hold it. Your vehicle will gradually
slow down. Release the lever at the speed you want to maintain. • Move the lever down (to SET-) and
release it immediately. The cruising
speed will decrease by 2 km/h
(1 mph) each time you move the lev‐
er down (to SET-) in this manner.
To temporarily accelerate with
the cruise control on:
If you want to speed up temporarily
when the cruise control is on, depress the accelerator pedal. Increased speed
will not interfere with cruise control op‐
eration or change the set speed.
To return to the set speed, take your foot off the accelerator pedal.
To cancel cruise control, do one
of the following:
5ZQF
"
0+'
5ZQF
#
0+'-
• Depress the brake pedal.
• Depress the clutch pedal if equipped with a manual transaxle.
Driving your vehicle
7-50

ADVANCED SMART CRUISE CONTROL SYSTEM (IF EQUIPPED)
1. Cruise indicator
2. Set speed
3. Vehicle-to-vehicle distance
The advanced smart cruise control sys‐
tem allows you to program the vehicle to maintain constant speed and dis‐
tance detecting the vehicle ahead with‐
out depressing the accelerator or brake pedal.
WARNING
For your safety, please read theowner's manual before using the ad‐vanced smart cruise control system.
NOTICE
To activate advanced smart cruise
control, depress the brake pedal at
least once after turning the engine
start/stop button switch to the ON
position or starting the engine. This
is to check if the brake switch which
is important part to cancel advanced
smart cruise control is in normal
condition.
WARNING
•If the advanced smart cruise con‐trol is left on, (cruise indicator inthe instrument cluster illuminated)the smart cruise control can be ac‐tivated unintentionally. Keep thesmart cruise control system off(cruise indicator turn off) whenthe smart cruise control is notused.
•Use the smart cruise control sys‐tem only when traveling on openhighways in good weather.
•Do not use the smart cruise con‐trol when it may not be safe tokeep the car at a constant speed.For instance:-Highway interchange and toll‐gate
-Road surrounded by abnormallymultiple steel constructions(subway construction, steeltunnel, etc)
-Parking lot
-Lanes beside guard rail on aroad
(Continued)

7-59
7
Driving your vehicle

Advanced smart cruise control will
be temporarily canceled when:
0+'-
Cancelled manually
The advanced smart cruise control is
temporarily canceled when the brake pedal is depressed or the CANCEL but‐
ton is pressed. The speed and vehicle to
vehicle distance indicator on the cluster is disappeared and the CRUISE indicator
is illuminated continuously.
Cancelled automatically
• The driver's door is opened.
• The shift lever is shifted to N (Neu‐ tral), R (Reverse) or P (Parking). • The EPB (electronic parking brake) is
applied.
• The vehicle speed is over 190 km/h (120 mph).
• The ESC, ABS or TCS is operating.
• The ESC is turned off.
• The sensor or the cover is dirty or blocked with foreign matter.
• When the vehicle is stopped for over 5 minutes.
• The driver starts driving by pushing the lever up (RES +) or down (SET -)
or depressing the accelerator pedal approximately 3 seconds after the
vehicle is stopped by the advanced
smart cruise control system with no
other vehicle ahead or a vehicle stop‐
ped far away in front.
• The accelerator pedal is continuously depressed for a long time.
• The engine RPM is in dangerous range.
• The SCC system has malfunctioned.
Each of these actions will cancel the
advanced smart cruise control opera‐
tion. (the set speed and vehicle to vehi‐
cle distance on the LCD display will go
off.) In a condition the advanced smart
cruise control is cancelled automatical‐
ly, the advanced smart cruise control
will not resume even though the RES+ or SET- lever is moved. Also, the EPB
(electronic parking brake) will be ap‐
plied when the vehicle is stopped. • When activating the ISG mode.
• When activating the AEB (Autono‐ mous Emergency Braking).
CAUTION
If the advanced smart cruise controlis cancelled by other than the rea‐sons mentioned, we recommendhave the system checked by an au‐thorized Kia dealer.
Driving your vehicle
7-62

0+'-
CAUTION
If the system is automatically can‐celled, the warning chime will soundand a message will appear for a fewseconds.You must adjust the vehicle speed bydepressing the accelerator or brakepedal according to the road conditionahead and driving condition.Always check the road conditions. Donot rely on the warning chime.
To resume cruise control set speed:
0+'
If any method other than the CRUISE
button was used to cancel cruising speed and the system is still activated,
the cruising speed will automatically re‐
sume when you move the lever up (to RES+).
If you move the lever up (to RES+), the
speed will resume to the recently set
speed. It will not resume if the vehicle speed has dropped below approximate‐
ly 30 km/h (20 mph).
NOTICE
To reduce the risk of an accident, al‐
ways check the road conditions
when reactivating the advanced
smart cruise control using the RES+
lever to ensure the road conditions
permit safe use of the cruise con‐
trol.
To turn cruise control off:
0+'
Press the CRUISE button. (the CRUISE
indicator in the instrument cluster will go off).

7-63
7
Driving your vehicle

Vehicle to vehicle distance
setting
To set vehicle to vehicle distance:
0+'
This function allows you to program
the vehicle to maintain relative distance to the vehicle ahead without depressing
the accelerator pedal or brake pedal.
The vehicle to vehicle distance will au‐
tomatically activate when the advanced smart cruise control system is on.
Select the appropriate distance accord‐
ing to road conditions and vehicle
speed. Each time the button is pressed, the
vehicle to vehicle distance changes as
follows:
%JTUBODF
 %JTUBODF
 %JTUBODF

%JTUBODF


For example, if you drive at 90 km/h
(56 mph), the distance maintain as fol‐ lows: Distance 4 - approximately 52.5 mDistance 3 - approximately 40 mDistance 2 - approximately 32.5 mDistance 1 - approximately 25 m
NOTICE
The 'Distance 4' is always set when
the system is used for the first time
after starting the engine.
The advanced smart cruise control
system remember the last vehicle to
vehicle distance which the driver
used in the vehicle with AEB.
Driving your vehicle
7-64